Any refs to prove that?
When testing devices based on ITO/ZnO/CsPbBr3/TFB/MoO3/Ag structures, I found that the current density of the device always increases sharply to 1000mA/cm2 at about 3V bias, and the device does...
16 July 2024 4,291 0 View
For the measurement of electrode reaction kinetics and electron transfer rate constant, using E. Laviron's model and RICHARD S. Nicholson's model, the greater peak potential separation indicates...
30 June 2024 580 3 View
LS-DYNA finite element simulation：During the battery impact simulation, some units experienced failure and subsequently underwent penetration. How can this issue be resolved?
24 June 2024 3,917 0 View
Hi everyone! I am using a Q5 high fidelity DNA polymerase to amplify a 6.7 kb plasmid. The PCR with Q5 went well with longer primers (~55 bases) at 70-72 degree C. However, I keep failing in the...
17 June 2024 1,734 4 View
With the closure of the back-arc basin, oceanic island arcs can collide with continental margins. Theoretically, is there a set of unique conditions under which, following such a collision, the...
15 June 2024 2,410 0 View
how do I change my interest in Researchgate? There are many notifications regarding articles, which I don't like at all. The website indicates they are according to my interest, but I can not...
11 June 2024 8,509 2 View
This question addresses the ongoing challenge of improving cancer therapies by focusing on the development of advanced drug delivery systems that can more accurately target cancer cells, thereby...
28 May 2024 6,197 5 View
What should the requirement be for an all-inorganic perovskite solar cell? What should be the nature of its layer? If we use any organic layer in an all-inorganic perovskite active material-based...
24 May 2024 3,355 2 View
who can send it to me?it is important for me.thanks.
14 May 2024 5,983 4 View
As known, the spin exchange coupled Mn4+ leads to a narrowd singal, at ca. g=2.006 with the line width about 500 gauss. Why the birnessite MnO2 dispalys such wide spectrum? Is any other exchange...
23 April 2024 6,351 3 View
Hi, researchers, Is it possible to use a safer acid instead of monochloroacetic acid to convert bacterial cellulose to carboxymethyl cellulose?
29 July 2024 4,570 0 View
What would be the effect of distance from CNC cum Heart on the structure and function of a particular part of the human body? Do short people have evolutionary advantages to control body parts in...
09 July 2024 2,052 3 View
Hello everyone reading this topic! It is well known that microcrystalline cellulose 102 is recommended for use in direct compression technology, however, like other grades, it has poor flowability...
08 July 2024 2,807 0 View
I use X-ray diffraction (XRD) techniques to quantify the degree of crystallinity in my samples, referring to the following formula (CrI=Acrystal-Aamph/Atotal ). using deconvolution area methods (...
06 July 2024 6,234 9 View
Hello, I am looking for (estimated) degradation rates of cellulose in a classic anaerobic digestion setup (meso or thermophilic, WWTP sludge, 30+ days of operation) to have an idea of the % of...
01 July 2024 5,867 5 View
I am studying the surface topography of bacteria-degraded cellulose and lignin using the non-contact mode of Atomic Force Microscopy (AFM), which requires a solvent to make a dispersion of the...
21 May 2024 6,358 3 View
I want to know affordable lab services in India for the said analysis
13 May 2024 4,186 1 View
Hi all! I would like to know if there is a method to polymerize low MW cellulose triacetate (e.g. re-engaging in acetylation). Or this is not possible and the MW of my cellulose source should be...
08 May 2024 5,260 1 View
I want to study the properties of Jute NCC. What are the changes, if I make this nano to micro?
01 May 2024 7,385 4 View
How to dissolve cellulose to get a transparent film? kindly suggest me a chemical to convert dissolved polymer into a gel or recommend a plasticizer?
18 April 2024 9,076 3 View
