Could the development of synthetic groundwater models help optimize RO an NF membranes selectivity and fouling ?

30 September 2024 0 1K Report

How do variations in membrane surface charge and water chemistry impact the selectivity and fouling behavior in reverse osmosis systems, especially when treating complex industrial wastewater or brackish water sources? Could the development of synthetic groundwater models help optimize these systems for better long-term performance?

Badges
Science topic

More Mohammed Igouzal's questions See All

Is skin yellowness an numerical or ordinal variable?

I have a response variable called skin yellowness, which I will measure via a scored color chart, whereby 1 is pale yellow and 15 is orange. I'm not sure if this counts as an ordinal variable,...

11 August 2024 4,793 1 View

• What the possible Persistent Organic Pollutants and Heavy metals present in fluorspar, sediments, and water bodies around its mining area?

Approximate concentrations are require in compared with the WHO permissible limts

11 August 2024 2,723 1 View

How can I get old refernce in geomorphological mapping?

how can I read Waters, R. S. 1958. Morphological mapping. Geography 43 :10-17 from internet? note: not in google or resaearch gate

26 July 2024 7,813 3 View

How can the rubber fibres produced by the electrospinning device be removed from the fibre collect(aluminium foil) ?

How can the rubber fibres produced by the electrospinning device be removed from the fibre collector (aluminium foil) without affecting the orientation of the rubber fibres for use in reinforcing...

26 July 2024 8,281 0 View

My question concerns MTT cell viability assay?

Despite not having cells in the media, I am getting purple color. I have tried many troubleshooting methods, varying media types, and even different MTTs from different companies to figure out the...

21 July 2024 9,914 1 View

What are the modern topics to work under bacteriocin and fermentation as PhD student?

As PhD student specialized as food and industrial microbiology need to further research on bacteriocin and fermented food.

16 July 2024 7,394 1 View

How to get a research question in educational administration and management in MPhil?

What are some of the areas to consider in undertaken research in educational administration in MPhil.

14 July 2024 8,394 2 View

How can i elucidate a compound using xrd?

XRD analysis

08 July 2024 977 4 View

How i can calculate mathematically COD concentration if i add 1gr from glucose to 1 L distilled water ?

how i can calculate mathematically COD concentration if i add 1gr from glucose to 1 L distilled water

08 July 2024 9,104 2 View

What is the best method for modeling the transmission and reflection of an electromagnetic wave incident on a magnetic multilayer thin film?

Previously, I successfully modelled the transmission and reflection of electromagnetic waves incident on non-magnetic materials. Please refer to my publications for details: 1- A polynomial model...

05 July 2024 1,396 2 View

How can I prepare virus for a TEM or SEM imaging?

I have virus (viral hemorrhagic septicemia virus) in suspension and the experiment will not involve cells. What level of TCID50 is preferred?

11 August 2024 3,115 1 View

Handling Missing Data and Building a Predictive Model with Incomplete Information ?

I am developing a predictive model for a water supply network that involves 20 influencing points. However, I only have historical data for 10 out of these 20 points. I would like to know how to...

10 August 2024 4,005 2 View

Is it possible to use the Fused Deposition Modeling (FDM) to additively manufacture interconnected porous structure generation of >100-200 micrometer?

Usually, additive manufacturing techniques like SEBM, SLS, and SLM are used for interconnected porous lattice structure generation with sizes of >100–200 micrometers. Can the Fused Deposition...

09 August 2024 7,892 0 View

How to define an anisotropic material with asymmetric elastic compliance/stiffness matrix in ANSYS APDL?

I need to model an anisotropic material in which the Poisson's ratio ν_12 ≠ ν_21 and so on. Therefore, the elastic compliance matrix wouldn't be a symmetric one. In ANSYS APDL, for TB,ANEL...

09 August 2024 5,048 2 View

How can I apply boundary conditions in an orthotropic steel deck numerical model using ABAQUS software?

I am trying to simulate vehicular loading on an orthotopic steel deck bridge section in ABAQUS software. The red arrow mark in the attached figure indicates the direction in which the vehicle will...

08 August 2024 719 0 View

Can you suggest reliable sources defining "3D mesh" and "3D city models"?

Dear fellow researchers, I am currently working on a paper where I need to provide a reliable reference that defines and distinguishes between 3D mesh models and 3D city models. Although I am...

06 August 2024 9,986 2 View

Please explain how the plastic input value should be considered from the true stress-strain curve for the bilinear elastoplastic material model ?

I am working on Abaqus/Explicit(Quasistatic ) for the deformation of the auxetic structure model. Please explain how the plastic input value should be considered from the true stress-strain curve...

05 August 2024 454 3 View

What are the shear and normal stiffness values of an LLDPE liner in 3D numerical modeling of a stockpile?

I am seeking experimental or applicable data for the liner (LLDPE) interface in FLAC3D numerical modeling of a large stockpile. Could you please recommend suitable references? The preferred data...

05 August 2024 3,665 0 View

Is it necessary to covary exogenous constructs in a structural model?

I am working on a SEM model where i have 7 latent variables (6 exogenous and 1 endogenous). In AMOS when I co-vary the exogenous constructs, only 2 paths are coming significant out of 6. But when...

03 August 2024 6,028 4 View

Given the current level of natural phenomena cause by the climate change and environmental pollution, will the AI find the technological solutions?

AI-driven technologies offer previously unheard-of capabilities to process enormous volumes of data, extract insightful knowledge and improve predictive models, according to the UN’s World...

31 July 2024 9,733 3 View