Could I use CO2-TPD to identify basic sites of hyper cross linked poly styrene?

Bita Karami @Bita-Karami

28 August 2019 1 2K Report

Hello

I need to investigated the basic strength of hyper cross linked polystyrene. could I use CO2-TPD analysis?

Amravati Singh

yes u can use CO2-TPD analysis for basic strength analysis.

see the attached file.

Badges
Science topic

More Bita Karami's questions See All

If Purospher STAR RP-18 LiChroCART (HPLC column) is suitable for amino acids?

Hi Dear Researchers, Could anyone please provide me with some information about the HPLC column, specifically the “Purospher STAR RP-18 LiChroCART Cartridge”? I would like to know if it is...

25 June 2024 9,523 1 View

How we can express "BCMA CAR" in NK cells?

Hi everybody I am Bita Divsalar, a Ph.D. candidate in hematology. My research focuses on creating an mRNA-based platform for CAR-NK cell therapy. During my experiments, I encountered some...

02 June 2024 5,105 0 View

I'm working on defoamers in gas sweetening process(amine unit). what do you suggest?

I appreciate if you could provide me with good articles or an innovative material which suits my research.

12 September 2023 1,725 0 View

Artificial intelligence (AI) can help us to mitigate and adapt to climate change. What do you think?

Nowadays, the progress of artificial intelligence (AI) in the world is remarkable. I would like to know if it is possible to get rid of the emergency crisis of climate change through artificial...

02 June 2023 6,862 2 View

Why Abaqus dynamic explicit has fluctuating stress output?

My tensile test simulation in Abaqus dynamic explicit has fluctuating sress output as shown in the attached image. I want to get a smooth curve, but the behavior does not change with changing the...

28 May 2023 7,504 2 View

How can I wash and reuse PM Maxi column?

Hi everyone, The plasmid was extracted with the FavorPrep Plasmid Extraction Maxi Kit, and its PM Maxi Column was maintained. We hope to reuse the PM Maxi Column. How can I wash and reuse this PM...

23 February 2023 1,726 1 View

How can I make a buffer for in vitro transcription in the laboratory?

Hi everyone, I hope to make an appropriate buffer for in vitro transcription. Could anyone help me with an easy-to-perform protocol to make a buffer for in vitro transcription in the laboratory?

11 February 2023 159 2 View

Why my protocol for P19 cell differentiation to cardiomyocytes isn't working?

I am culturing 1 million cells in 100 mm non adherent bacterial petridishes in DMEM/F12 supplemented with 1% penstrep and 10% FBS for 4 days to form embryoid bodies and then culture them as mono...

18 December 2022 5,176 4 View

What is normal ktv hemodialysis and peritoneal dialysis ?

how to calculate ktv?

05 December 2022 3,097 3 View

What is the reason of negative response in 3D plots of Central Composite Design?

I used Central Composite Design to optimize effective factors for a typical determination. Now, as shown in attached Figure, in 3D response surface plots, response (peak area) is started from...

01 April 2022 8,672 0 View

Can we calculate the CO2 adsorption capacity(mmol/g) of a solid adsorbent (MOF) using CO2_TPD analysis?

what is the relationship b/w TCD signal(a.u) and CO2 desorbed (mmol/g) ? can we plot CO2 desorbed(mmol/g) Vs Time(min) from TPD data?

15 July 2024 3,248 1 View

Can i use polystyrene as a matrix in a hybrid COMPOSITE?

fiber powders will be used as a reinforcement.

23 June 2024 10,027 3 View

How can I get RAW264.7 cells to differentiate into osteoclasts?

I can't get RAW264.7 cells to differentiate into osteoclasts. I've tested different densities: 5000 cells/cm2 , 10,000 cells/cm² and 20,000 cells/cm² in 35mm polystyrene. I use DMEM medium, 10%...

12 June 2024 4,604 1 View

Can anyone suggest a method to check whether crosslinking occurred or not?

im working on the photocrosslinking of hydrogels and want to check whether crosslinking happened with the material I have.

12 June 2024 5,579 3 View

What is the reason for certain size measurement errors using Dynamic Light Scattering?

I am currently doing some initial tests on the size of carboxylate-modified polystyrene beads in deionised water to determine their interaction with BSA with and without the addition of PLL-g-PEG...

09 June 2024 5,603 7 View

UV polymerisation of styrene?

Hi everyone, I am attempting to polymerize styrene using UV initiators, specifically BAPO, even at a concentration of 5 wt%, I am experiencing limited success with this approach. Has anyone...

30 May 2024 2,509 4 View

May i use mgcl2 or cucl2 or bivalent salt in place of calcium chloride for crosslinking the membrane consisting sodium alginate. which is better?

i am working on self heating membrane preparation. so for crosslinking of membrane, may i use copper chloride, or magnesium chloride or any bi valent cation salt to crosslink it? and which one...

29 May 2024 2,474 0 View

Does anyone know how to Coat polystyrene particles with APTES ?

I want to have amine group attached on the polystyrene particle surface. APTES can be used to do that.

21 May 2024 8,092 0 View

How to MoS2 transfer?

During the transcription process, we encountered a situation where only PS was transferred I'm so curious about the solution. We make a PS solution using 300 mg of Polystyrene and 3 ml of...

06 May 2024 6,786 0 View

Is there any methodology for silane functionalization in hydrogels post-synthesis?

I would like to perform functionalization using silanes on an already synthesized hydrogel crosslinked with citric acid. Does anyone know a methodology using solvents?

28 April 2024 6,747 4 View