Could anyone point me to literature discussing the mechanical properties of silica coated micro-beads?

sir,

refer the following link

1) The first European Symposium on Polymer Derived Ceramics (PDCs), Strasbourg (France), May 24-28, during the annual spring meeting of the European Material Research Society (E-MRS) (2004).

2) Seyferth, D. and Plenio H., J. Am. Ceram. Soc., Vol. 73, p. 2131 (1990).

3) Su, K., Remsen, E. E., Zank, G. A. and Sneddon, L. G., Chem. Mater., Vol. 547, p. 5 (1993).

4) Baldus, H.-P., Passing, G., Sporn, D. and Thierauf, A., Ceram. Trans., Vol. 58, p. 75 (1995).

5) Riedel, R., Kienzle, A., Dressler, W., Ruwisch, L., Bill, J. and Aldinger, F., Nature, Vol. 382, p. 796 (1996).

6) Srivastava, D., Duesler, E. N. and Paine, R. T., Eur. J. Inorg. Chem., p. 855 (1998).

7) Schmidt, W. R., Narsavage-Heald, D. M., Jones, D. M., Marchetti, P. S., Raker, D. and Maciel, G. E., Chem. Mater., Vol. 11, p. 1455 (1999).

8) Weinmann, M., Schuhmacher, J., Kummer, H., Prinz, S., Peng, J., Seifert, H. J., Christ, M., Müller, K., Bill, J. and Aldinger, F., Chem. Mater., Vol. 12, p. 623 (2000).

9) Nghiem, Q. D., Jeon, J.-K., Hong, L.-Y. and Kim, D.-P., J. Organomet. Chem., Vol. 688, p. 27 (2003).

10) Haberecht, J., Krumeich, F., Grützmacher, H. and Nesper, R., Chem. Mater., Vol. 16, p. 418 (2004).

11) Website Starfire Systems Inc.: www.starfiresystems.com

12) Ainger, F. W. and Herbert, J. M., ‘The preparation of Phosphorus-Nitrogen Compounds as Non-Porous Solids,’ in “Special Ceramics,” Ed. by Popper, P., Academic Press, New York (1960) p. 168.

13) Chantrell, P. G. and Popper, P., ‘Inorganic Polymers for Ceramics,’ in “Special Ceramics,” Ed. by Popper, P., Academic Press, New York (1965) p. 67.

14) Verbeek, W., Ger. Pat. No. 2218960 (Bayer AG), Nov. 8, (U.S. Pat. No. 3853567) (1973).

15) Verbeek, W. and Winter, G., Ger. Pat. No. 2236078 (Bayer AG), Mar. 21 (1974).

16) Winter, G., Verbeek, W. and Mansmann, M., Ger. Pat. No. 2243527, May 16 (1974).

17) Fritz, G., Z. Anorg. Allg. Chem., Vol. 286, p. 149 (1956).

18) Yajima, S., Hayashi, J. and Omori, M., Chem. Lett., Vol. 9, p. 931 (1975).

19) Yajima, S., Hasegawa, Y., Okamura, K. and Matsuzawa, I., Nature (London), Vol. 273, p. 525 (1978).

20) Yajima, S., Hayashi, J., Omori, M. and Okamura, K., Nature (London), Vol. 261, p. 683 (1976).

21) Yajima, S., Am.Ceram. Soc. Bull., Vol. 62, p. 893 (1983).

22) Wynne, K. J. and Rice, R. W., Annu. Rev. Mater. Sci., Vol. 14, p. 297 (1984).

23) Baney, R. H. and Gaul, J. H., US Pat. No. 4310651 (Dow Corning Corp.) (1982).

24) West, R., David, L. D. and Djurovich, P. I., Yu, H. and Sinclair, R., Am. Ceram. Soc. Bull., Vol. 62, p. 899 (1983).

25) Shilling, C. L., Jr., Wesson, J. P. and Williams, T. C., Am. Ceram. Soc. Bull., Vol. 62, p. 912 (1983).

26) Seyferth, D., Wisemann, G. H. and Prud'homme, C., J. Am. Ceram. Soc., Vol. 66, p. C-13 (1983).

27) Yajima, S., Hayashi, J. and Omori, M., Chem. Lett., p. 931 (1975).

28) Yajima, S., Hayashi, J. and Omori, M., Ger. Offen., DE 2618150 (1976).

29) Yajima, S., Hayashi, J. and Omori, M., Ger. Offen., DE 2618246 (1976).

30) Miller, R. D. and Michl, J., Chem. Rev., Vol. 89, p. 1359 (1989).

31) Miller, R. D., Angew. Chem. Adv. Mater., Vol. 101, p. 1773 (1989).

32) West, R., J. Organomet. Chem., Vol. 300, p. 327 (1986).

33) Boury, B., Carpenter, L. and Corriu, R. J. P., Angew. Chem., Vol. 102, p. 818 (1990).

34) Whitmarsh, C. K. and Interrante, L. V., Organometallics, Vol. 10, p. 1336 (1991).

35) Boury, B., Corriu, R. J. P. and Douglas, W. E., Chem. Mater., Vol. 3, p. 487 (1991).

36) Boullion, E., Pailler, R., Naslain, R., Bacqué, E., Pillot, J.-P., Birot, M., Dunoguès, J. and Huong, P. V., Chem. Mater., Vol. 3, p. 356 (1991).

37) Seyferth, D. and Lang, H., Organometallics, Vol. 10, p. 551 (1991).

38) Seyferth, D., Tasi, M. and Woo, H.-G., Chem. Mater., Vol. 7, p. 236 (1995).

39) Popper, P., Brit. Ceram. Res. Assn. Special Publ., Vol. 57, p. 1 (1967).

40) Verbeek, W., Ger. Offen. 2 218 960 (1973).

41) Seyferth, D., Wiseman, G. H. and Prud'homme, C., J. Am. Ceram. Soc., Vol. 66, p. C-13 (1983).

42) Seyferth, D., Wiseman, G. H. and Prud'homme, C., Mater. Sci. Res., Vol. 17, p. 263 (1984).

43) Seyferth, D. and Wiseman, G. H., Am. Chem. Soc. Polym. Div. Polym. Prep., Vol. 25, p. 10 (1984).

44) Blum, Y. D., Schwartz, K. B. and Laine, R. M., J. Mater. Sci., Vol. 24, p. 1707 (1989).

45) Werner, E., Klingebiel, U., Pauer, F., Stalke, D., Riedel, R. and Schaible, S., Z. Anorg. Allg. Chem., Vol. 596, p. 35 (1991).

46) Huggins, J., Ger. Offen. DE 4114217A1 (1992).

47) Lavedrine, A., Bahloul, D., Goursat, P., Choong Kwet Yive,N. S., Corriu, R. J. P., Leclercq, D., Mutin, P. H. and Vioux, A., J. Eur. Ceram. Soc., Vol. 8, p. 221 (1991).

48) Choong Kwet Yive, N. S., Corriu, R. J. P., Leclercq, D., Mutin, P. H. and Vioux, A., New J. Chem., Vol. 15, p. 85 (1991).

49) Vaahs, T., Brück, M. and Böcker, W. D. G., Adv. Mater., Vol. 4, p. 224 (1992).

50) Bahloul, D., Pereira, M., Goursat, P., Choong Kwet Yive, N. S. and Corriu, R. J. P., J. Am. Ceram. Soc., Vol. 76, p. 1156 (1993).

51) Noll, W. J., “Chemistry and Technology of Silicones,” Academic Press (1968).

52) Zeldin, M., “Encyclopedia of Materials Science and Engineering, Bever MB (ed.),” Pergamon Press, Oxford (1986).

53) Kendrick, T. C., Parbhoo, B. and White, J. W., “The Chemistry of Organic Silicon Compounds,” Patai, S. and Rappoport, Z., (Eds.), John Wiley & Sons, Chichester (1995).

54) Corriu, R. and Jutzi, P. (Eds.), “Tailor-made Silicon-Oxygen Compounds —from Molecules to Materials,” Vieweg & Sohn, Braunschweig/Wiesbaden, Germany (1996).

55) Kienzle, A., Ph. D. Thesis, Universität Stuttgart (1994).

56) Riedel, R., Bill, J. and Kienzle, A., Appl. Organomet. Chem., Vol. 10, p. 241 (1996).

57) Weinmann, M., “Precursor-Derived Ceramics,” Bill, J., Wakai, F. and Aldinger, F. (Eds.), Wiley-VCH, Weinheim (1999).

58) Weinmann, M., Bill, J. and Aldinger, F., Ger. Offen. DE 19741458A1 (1999).

59) Aldinger, F., Weinmann, M. and Bill, J., Pure Appl. Chem., Vol. 70, p. 439 (1998).

60) Bill, J. and Aldinger, F., Adv. Mater., Vol. 7, p. 775 (1995).

61) Blum Y. D. and Laine, R. M., US Pat. 4 801439 (1989).

62) Blum, Y. D. and Laine, R. M., US Pat. 5 017529 (1991).

63) Jansen, M. and Baldus, H.-P., Ger. Offen. DE 410 71 08 A1 (1992).

64) Baldus, H.-P., Wagner, O. and Jansen, M., Mater. Res. Soc. Symp. Proc., Vol. 271, p. 821 (1992).

65) Baldus, H.-P., Jansen, M. and Wagner, O., Key Eng. Mater., Vol. 89-91, p. 75 (1994).

66) a) Baldus, H.-P. and Jansen, M., Angew. Chem., Vol. 109, p. 338 (1997).

66) b) Baldus, H.-P. and Jansen, M., Angew. Chem. Int. Ed. Engl., Vol. 36, p. 328 (1997).

67) Baldus, H. P., Jansen, M. and Sporn, D., Science, Vol. 285, p. 699 (1999).

68) Seyferth, D., Plenio, H., Rees, W. S., Jr. and Büchner, K., “Frontiers of Organosilicon Chemistry,” Bassindale, A. R. and Gaspar, P. P. (Eds.), The Royal Society of Chemistry, Cambridge, UK (1991) p. 15.

69) Su, K., Remsen, E. E., Zank, G. A. and Sneddon, L. G., Polym. Prepr., Vol. 34, p. 334 (1993).

70) Wideman, T., Su, K., Remsen, E. E., Zank, G. A. and Sneddon, L. G., Chem. Mater., Vol. 7, p. 2203 (1995).

71) Fazon, P. J., Remsen, E. E., Beck, J. S., Carroll, P. J., McGhie, A. R. and Sneddon, L. G., Chem. Mater., Vol. 7, p. 1942 (1995).

72) Wideman, T., Su, K., Remsen, E. E., Zank, G. A. and Sneddon, L. G., Mater. Res. Soc. Symp. Proc., Vol. 410, p. 185 (1996).

73) Wideman, T., Cortez, E., Remsen, E. E., Zank, G. A., Carroll, P. J. and Sneddon, L. G., Chem. Mater., Vol. 9, p. 2218 (1997).

74) Weinmann, M., Haug, R., Bill, J., Aldinger, F., Schuhmacher, J. and Müller, K., J. Organomet. Chem., Vol. 541, p. 345 (1997).

75) Weinmann, M., Haug, R., Bill, J., De Guire, M. and Aldinger, F., Appl. Organomet. Chem., Vol. 12, p. 725 (1998).

76) Haug, R., Weinmann, M., Bill, J. and Aldinger, F., J. Eur. Ceram. Soc., Vol. 19, p. 1 (1999).

77) Pouskouleli, G., Ceram. Int., Vol. 15, p. 213 (1989).

78) Peuckert, M., Vaahs, T. and Bruck, M., Adv. Mater., Vol. 2, p. 398 (1990).

79) Kroll, P., J. Eur.Ceram. Soc., Vol. 25, p. 163 (2005).

80) Zachariasen, W. H., J. Am. Chem. Soc., Vol. 54, p. 3841 (1932).

81) Umesaki, N., Hirosaki, N. and Hirao, K., J. Non-Cryst. Solids, Vol. 150, p. 120 (1992).

82) De Brito-Mota, F., Justo, J. F. and Fazzio, A., Phys. Rev. B, Vol. 58, p. 8323 (1998).

83) Matsunaga, K., Iwamoto, Y., Fisher, C. A. J. and Matsubara, H., J. Ceram. Soc. Japan, Vol. 107, p. 1025 (1999).

84) Amkreutz, M. and Frauenheim, T., Phys. Rev. B, Vol. 65, p. 134113 (2002).

85) Sarntheim, J., Pasquarello, A. and Car, R., Phys. Rev. Lett., Vol. 74, p. 4682 (1995).

86) Abe, Y. and Gunji, T., Progress in Polymer Science, Vol. 29(3), p. 149 (2004).

87) Jovanovic, J. D., Tehnika (Belgrade, Yugoslavia), Vol. 58, p. 4 (2003).

88) Chojnowski, J., Cypryk, M. and Kurjata, J., Progress in Polymer Science, Vol. 28(5), p. 691 (2003).

89) Zeigler, J. M., US Patent 4,761,464 (1988).

90) Arkles, B. C., US Patent 4,626,583, assigned to Petrarch Systems, Inc. (1986).

91) Hitachi Ltd., Japanese Patent 58,153,931; Chem. Abstr., Vol. 100, p. 15345y (1984).

92) Chojnowski, J., Kurjata, J. and Rubinsztajn, S., Makromol. Chem. Rapid Commun., Vol. 9, p. 469 (1988).

93) Kurjata, J. and Chojnowski, J., Makromol. Chem., Vol. 194, p. 3271 (1993).

94) Wills, R. R., Markle, R. A. and Mukherjee, S. P., Am. Ceram. Soc. Bull., Vol. 62, p. 904 (1983).

95) Yajima, S., Am. Ceram. Soc. Bull., Vol. 62, p. 893 (1983).

96) Hasegawa, Y. and Okamura, K., J. Mater. Sci., Vol. 18, p. 3633 (1983).

97) Seyferth, D. and Wisemann, G. H., J. Am. Ceram. Soc., Vol. 67, p. C-132 (1984).

98) West, R., “Ultrastructure Processing of Ceramics, Glasses and Composites,” Ed. by Hench, L. L. and Ulrich, D. R., Wiley Interscience, New York (1984) p. 235.

99) Schwartz, K. B., Roweliffe, D. J., Blum, Y. D. and Laine, R. M., Mater. Res. Soc. Symp. Proc., Vol. 73, p. 407 (1986).

100) Legrow, G. E., Lim, T. F., Lipowitz, J. and Reoach, R. S., Am. Ceram. Soc. Bull., Vol. 66, p. 363 (1987).

101) Song, Y. C., Hasegawa, Y., Yang, S. Y. and Sato, M., J. Mater. Sci., Vol. 23, p. 1911 (1988).

102) Hasegawa, Y., J. Mater. Sci., Vol. 24, p. 1177 (1989).

103) Aylett, B. J., Organomet. Chem. Rev., Vol. 3, p. 151 (1968).

104) Yajima, S., Hayashi, J. and Okamura, K., Nature (London), Vol. 266, p. 521 (1977).

105) Seyferth, D. and Wisemann, G. H., “Science of Ceramic Chemical Processing,” Ed. by Hench, L. L. and Ulrich, D. R., Wiley Interscience, New York (1986) p. 354.

106) Laine, R. M., Blum, Y. D., Chow, A., Hamlin, R., Schwartz, K. B. and Rowcliffe, D. J., Polym. Prepr., Vol. 28, p. 393 (1987).

107) Czekaj, C. L., Hackney, M. L. J., Hurley, W. J., Jr., Interrante, L. V., Sigel, G. A., Schields, P. J. and Slack, G. A., J. Am. Ceram. Soc., Vol. 73, p. 352 (1990).

108) Rahn, J. A., Laine, R. M. and Zhang, Z. F., Mater. Res. Soc. Symp. Proc., Vol. 171, p. 31 (1990).

109) Emsley, R. J. P., Sharp, J. H. and Bailey, J. E., “British Ceramic Society Proceedings,” Fabrication Technology, Ed. by Davidge, R. W. and Thompson, D. P., The Institut of Ceramics, Stoke-on-Trent, U.K. (1990) p. 139.

110) Baney, R. H., U. K. Pat. Appl. No. 2021545, Dec. (1979).

111) Sinclair, R. A. and West, R., Better Ceramics through Chemistry, Mater. Res. Soc. Symp. Proc., Vol. 32, p. 387 (1984).

112) Krüger, C. R. and Rochow, E. C., J. Polym. Sci., Vol. A2, p. 3179 (1964).

113) Seyferth, D. and Wiseman, G. H., J. Am. Ceram. Soc., Vol. 67, p. C-132 (1984).

114) Seyferth, D., Transformation of Organometallics into Common and Exotic Materials: Design and Activation, NATO ASI Ser. E: Appl. Sci.-No. Vol. 141, R. M. Laine (Ed.), Kluwer Publ. Dordrecht, p. 133 (1988).

115) Seyferth, D. and Wiseman, G. H., Ultra Structure Processing of Ceramics, Glasses and Composites, Wiley, New York, p. 265 (1984).

116) Burns, G. T., Angelotti, T. P., Hanneman, L. F., Chandra, G. and Moore, J. A., Journal of Materials Science (Historical Archive), Vol. 22, 7, p. 2609 (1987).

117) Andrianov, K. A. and Kotrelev, G. V., J. Organomet. Chem., Vol. 7, p. 217 (1967).

118) Rake, B., Roesky, H. W., Usón, I. and Müller, P., Angew. Chem., Vol. 110, p. 1508 (1998).

119) Hörz, M., Zern, A., Berger, F., Haug, J., Müller, K., Aldinger, F. and Weinmann, M., J. Eur. Ceram. Soc., Vol. 25, p. 99 (2005).

120) Laine, R. M. and Babonneau, F., Chem. Mater., Vol. 5, p. 260 (1993).

121) Schuhmacher, J., Weinmann, M., Bill, J., Aldinger, F. and Müller, K., Chem. Mater., Vol. 10, p. 3913 (1998).

122) Schuhmacher, J., Berger, F., Weinmann, M., Bill, J., Aldinger, F. and Müller, K., Appl. Organomet. Chem., Vol. 15, p. 809 (2001).

123) Weinmann, M., Bill, J. and Aldinger, F., Proc. Werkstoffwoche 1998. Band VII, Keramik/Simulation, Ed. Schuhmacher, J., Müller, K., Heinrich, J., Ziegler, G., Hermel, W. and Riedel, H., Wiley-VCH, Weinheim (1999) p. 321.

124) Weinmann, M., Zern, A. and Aldinger, F., Adv. Mater., Vol. 13, p. 1704 (2001).

125) Weinmann, M., Habilitation Thesis, Universität Stuttgart (2003).

126) Ebsworth, E. A. and Mays, M. J., J. Chem. Soc., p. 4879 (1961).

127) Ebsworth, E. A. and Mays, M. J., Angew. Chem., Vol. 74, p. 117 (1962).

128) Pump, J. and Wannagat, U., Angew. Chem., Vol. 74, p. 117 (1962).

129) Pump, J. and Wannagat, U., Ann. Chem., Vol. 652, p. 21 (1962).

130) Pump, J., Rochow, E. G. and Wannagat, U., Monatsh. Chem., Vol. 94, p. 588 (1963).

131) Birkofer, L., Ritter, A. and Richter, P., Tetrahedron Lett., Vol. 5, p. 195 (1962).

132) Razuvaev, G. A., Gordetsov, A. S., Kozina, A. P., Brevnova, T. N., Semenov, V. V., Skobeleva, S. E., Boxer, N. A. and Dergunov, Y. I., J. Organomet. Chem., Vol. 327, p. 303 (1987).

133) Gorbatenko, V. I., Gertsyuk, M. N. and Samarai, L. I., Zh. Org. Khim., Vol. 13, p. 899 (1977).

134) a) Gordetsov, A. S., Kozyukov, V. P., Votokov, I. A., Sheludyakova, S. V., Dergunov, Y. I. M. and Mironov, V. F., Uspekhi Khim., Vol. 51, p. 848 (1982).

134) b) Gordetsov, A. S., Kozyukov, V. P., Votokov, I. A., Sheludyakova, S. V., Dergunov, Y. I. M. and Mironov, V. F., Russian Chem. Rev., Vol. 51, p. 485 (1982).

135) Drake, J. E., Hemmings, R. T. and Henderson, H. E., J. Chem. Soc. (Dalton), p. 366 (1976).

I have a time series data of some biochemical studies ( DNA and Chromosomal damage) which I intend to use to further predict into future ?

No mRNA increase in PCR after successful transfection in ARPE-19 cells ?

Do there exist stand-alone permanently in-ground soil-moisture sensors with an installed GSM module, for outdoor use?

What is the easiest way to remove the water from organic solvents?

Virus neutralization assay in BSL2 lab?

Using LINK11 to Apply force in ANSYS APDL?

Cytoflex Flowcytometer, clotting issues and cleaning procedures?

Difficulties purifying Outer Membrane Vesicles using a Sucrose Density Gradient: Unable to detect any protein after this process?

What excamples do you know wasting unused contents of "empty" packaged products?

What is the largest disadvantage in using of face masks at present? What would you like to be improved?

I need to image mesoporous silica nanoparticles that are in ~100 nm size and do high resolution TEM to look at mesopores. what grids should I use?

How the parameters (such as Mw, Chemical bonds, polymer bland and so on) affect the mechanic property of polymer (such as storage, loss modulus) ?

No title

Why Austenite grains in steel show much more twinning than ferrite grains?

Sutter electrode holder leaking after applying positive pressure. How to fix?

Issues with Permeabilization during Flow Cytometry?

Which cell line should we use to perform biological dosimetry experiments?

What is the state of the drug inside solid lipid nanoparticles (SLNs)?

Is it possible for two human neuronal cell lines to have different gene sequence for the same protein?

Is CD44 degraded in lysosome together with hyaluronan after CD44 mediated endocytosis of hyaluronic acid?