what is the best joint type to connect the end of rigid pavement with the beginning of flexible pavement?
By using butt joint.
Thanks dr. abbas for your valuable answer
Dear Sir,
pl check it.
http://nptel.ac.in/courses/105101087/downloads/Lec-29.pdf
Dear Kundan, the shared file is not include the details that Dr Amjad ask. It is only shows details of joints for rigid pavement together, Not connection between rigid pavement and flexible pavement?!!!
Best regards
Dr Abbas
thanks abbas
Dear Dr. Amjad, this file may be helpful.
This connection is used on the plate with the transition between the concrete pavement with asphalt pavement.
Yes Dr Mohanned, that what i meant it in my answer previously, butt joint.
Thanks again.
Also this pdf file contains many types of pavement connections
including connection between rigid pavement and flexible pavement
http://d2dtl5nnlpfr0r.cloudfront.net/tti.tamu.edu/documents/0-5320-1.pdf
so many
http://www.acpa.org/wp-content/uploads/2014/10/All-About-Concrete-Pavement-Joint-Design-and-Construction-FINAL-100214.pdf
Thanks Dr. Mohannad
My thought is the details of this connection are so important. It depends on the loads and the soil beneath the connection.
Feeding zebrafish larvae properly is a challenge if we need to grow them. According to standard guidelines, how many grams or milligrams of Artemia should be given to 6 dpf larvae?
13 June 2024 389 0 View
Can anybody recommend the tensile strength of cement mortar? Can ASTM C307 be used to test for mortar without fibers?
03 June 2024 7,550 1 View
for ABO3 if only A & B then we used t=rA+Ro/sqrt2(rB+rO) kindly explain for BaSrCaTiO3 ?
31 May 2024 2,036 0 View
some data shows direct and some inverse relation? kindly share any authentic paper please.
07 May 2024 6,657 4 View
I need to prepare silymarin cream , I am facing some difficulty with that
06 May 2024 3,614 0 View
Hi, is there anyone have experienced and used SurfNet before I need help in installation and using it?
28 April 2024 4,264 0 View
Kindlly provide links or literature about the mechanism of free radical copolymerization of styrene and methacrlate, kinetics and rate equation
27 April 2024 404 2 View
I and using vectors with autoinducibe promoters(Pylb and cyt1). I have performed SDS of 24, 48, 72, 96 and 120 hours. No expression is found in soluble or insoluble form.
14 March 2024 8,752 0 View
I induced the preadipocyte after they reached 100% confluency. Then, I treated them with differentiation medium (hg DMEM 10% FBS, 1X P/S, IBMX 0.5mM, Dex 1uM, and Insulin 10 ug/ml) for 2 days....
18 February 2024 8,219 0 View
Hi, I ran COFACTOR and COACH servers many times for my enzymes to predict their ligand receptors and function prediction, and the website answered would send the result to my email, but I didn't...
14 December 2023 6,627 2 View
We have observed that tube to tube sheet joint leaked in our boiler and needs to overcome same by knowing the root cause.
08 August 2024 3,161 0 View
Details of the Analysis. Static Analysis Composite Layup Continuum Shell Elements FRP Material (Elastic and Hashin Damage)
03 August 2024 8,538 4 View
I ask Chinese seismologists to inform me: who should I contact to create a joint Forecast Center? I do not hide that the beginning of my work was connected with the successful forecast of the...
22 July 2024 2,276 1 View
How to simulate and analyze the wrinkling behavior of an FRP sheet under a non-uniform temperature distribution in ABAQUS software?
26 June 2024 5,044 1 View
I conducted a tensile test to analyze the strength of a welded joint and to implement an FEM model. Due to the high hardness of the base material, slippage between the grip and the base material...
10 June 2024 5,736 6 View
I am simulating my thesis work which includes concrete column and FRP tube. I used some of the contact card available in LsDyna but the simulation result is not good enough. Please share your...
27 May 2024 3,758 0 View
How can I use proc nlmixed for two-level joint model for data that is not longitudinal?
11 May 2024 4,239 0 View
software 3DEC in geotechnical engineering
05 May 2024 6,654 1 View
Short answer
22 April 2024 665 0 View
We know that there are 206 bones in human body but we do not know how many joints are there in our body. In Islamic books, Prophet Mohammad(S) said, there are 360 joints are there in human body....
11 April 2024 2,346 1 View