Comsol Modal Analysis Study?

Amirreza Javaherian @Amirreza-Javaherian

23 August 2021 0 3K Report

I need an analysis study about rectangular-shaped crack definition on cantilever beams in comsol 5.6 for modal analysis. I appreciate if any one has a sample about this research. Thanks.

Badges
Science topic

More Amirreza Javaherian's questions See All

Well-known free platforms for posting a postdoc vacancy?

Hi, I am wondering about well-known platforms that are free of charge for posting a postdoc vacancy. I know a few, but it would be nice to know more.

17 March 2024 7,886 0 View

The reason for the unusual, very sharp decrease in the X-ray peak intensity for the three alloys with the increase in the chemical composition ratio?

Dear all, Three alloys cast in the same conditions and with equal dimensions were subjected to X-ray diffraction. Alloy 1 has dual-phase delta and gamma, but in alloys 2 and 3, with the increase...

06 March 2024 4,566 4 View

How does surfactant affect the glass transition temperature and free volume of polymer membranes during pervaporation?

I am working on modifying polymer membranes with surfactants to improve their pervaporation performance. I noticed that the glass transition temperature (Tg) of the membranes decreased as the...

16 January 2024 5,411 4 View

What are the affecting parameters on hydraulic fracturing process?

Hi, I need some resources about it for my research. thank you.

03 October 2023 6,839 0 View

What is the equation that describes the relationship between Gibbs elasticity and elastic modulus in materials?

What is the equation that describes the relationship between Gibbs elasticity and elastic modulus in polymers?

08 August 2023 1,185 4 View

Does making hydrogel of PEG-maleimide and Gelatin-Furan need special treatments?

Hi, I am working on a hydrogel consisting of PEG-maleimide (PEG-mal, 4-armed) and Gelatin-Furan (Gel-fur) via a Diels-Alder crosslinking mechanism. I synthesized Gel-fur by combining Gelatin and...

23 June 2023 5,442 0 View

Dye absorption of gC3N4?

Hello, One of the problems of gC3N4 in the photocatalytic activity of dyes is dye absorption. Is there a solution to prevent the absorption of methylene blue by gC3N4?

16 April 2023 8,658 1 View

How can I assure my hydrothermal Teflon-lined autoclave is sealed correctly?

It is vital to close the autoclave tightly and seal it well during hydrothermal synthesis of nano-materials in order to let reactions complete perfectly. Would you please help me with this regard?

25 July 2022 7,584 0 View

Can we divide Aleatory uncertainty into deep and probabilistic uncertainties or these categories only belongs to epistemic uncertainty?

By the following definitions is it possible to divide aleatory uncertainty into these categories? Please give some references to prove or disprove this idea. Probabilistic uncertainty: applied...

16 May 2022 2,414 3 View

How can i have 1D plot results on an arbitrary circle around a cylinder?

I want to plot my results on an arbitrary boundary around a cylinder as in the attached picture. how can I have such an arbitrary circle dataset along the axial direction? I mean some circle...

15 June 2021 1,293 1 View

Problems about acousto-optic coupling in Comsol, how to check whether the moving mesh is correct?

I’m trying to reproduce the acousto-optic coupling simulation in the paper Frequency–angular resolving LiDAR using chip-scale acousto-optic beam steering. LNOI(lithium niobate on insulator) is...

13 August 2024 9,795 0 View

How to learn more about SPSS and its Application?

I would like to learn more about SPSS and Its application especially in regards to data analysis. Please suggest me how I can learn more about it. Thank you so much.

11 August 2024 9,101 4 View

Can I base on reverse DNA sequences to perform alignment, convert to amino acids and GenBank submission?

I have reverse sequences (AB1 format), can I base on reverse DNA sequences to perform nucleotide alignment, convert nucleotides to amino acids and deposit the sequence in GenBank database?

11 August 2024 5,138 1 View

Baseline drift in HPLC? What causes this?

Hello, Why do i see this baseline drift when i compare my blank (black) to the sample (blue)? Any suggestions as to why this happened? Thank you!

11 August 2024 3,770 4 View

Text-Communication from the M1 Hand Area using BCI—and then there is Elon Musk?

Willett, Shenoy et al. (2021) have developed a brain computer interface (BCI) that used neural signal collected from the hand area of the motor cortex (area M1) of a paralyzed patient. The...

10 August 2024 7,180 0 View

Has anyone applied Python in the field of textile engineering for data analysis, automation, or smart textiles?

I'm currently exploring the application of Python in textile engineering, specifically in areas like data analysis, process automation, and the development of smart textiles. I'm interested in...

10 August 2024 7,429 2 View

How can I use the cif data obtained from rietveld refinement extracted via gsas2, for microstructural analysis using ETEX software?

09 August 2024 7,718 0 View

How are iso-frequency contours plotted?

Let's say we have a standard, regular hexagonal honeycomb with a 3-arm primitive unit cell (something like the figure attached; the figure is only representative and not drawn to scale). The...

07 August 2024 1,937 1 View

How to prepare the nanoparticle treated fungal sample for Environmental SEM analysis?

A fungal strain was treated with nanoparticles. We want to do an environmental SEM analysis. So could anyone share your views on preparing the sample? Thank you.

07 August 2024 5,307 1 View

How to normalize and take the significance of the MTT OD values with 3 replicates for the same cell-line?

Hi, I have a question about normalizing the MTT OD values for doing the statistical analysis. So, if we have 3 different plates and we call them 3 different replicates, so, first we would...

07 August 2024 8,106 4 View