can you explain the mechanism of the CV obtained for Au electrode in Sulphuric acid?
THE PEAKS CORRESPONDS TO REDUCTION OXIDATION OF Au???
I am working on microalgae cultivation using waste water. The initial concentration of nutrients were less but the microalgae has achieved biomass growth of 2 g/L. The final concentration of...
08 August 2024 4,812 2 View
We are doing simulations of fdsoi ncfet in synopsis tcad can someone correctly explain how to match the ferroelectric capacitance and mos capacitance
06 March 2024 7,511 0 View
I am simulating a tension test of a bimaterial specimen in ABAQUS. I would like to create different field outputs for each material, and I would like to display them in a single contour plot. For...
20 January 2024 4,613 4 View
I would like to know if it is a common reagent kit for the target amplification of both DNA and RNA, or does it show amplification only for the RNA targets. Will the presence of DNA in the sample...
18 December 2023 7,062 2 View
Currently, I am working on algae-based wastewater treatment. in order to check the effect of various parameters towards treatment efficiency, I want to vary the COD, Nitrate, Nitrite, and...
13 September 2023 3,584 3 View
How it enhance acedemic or industrial career? thanks in advance
29 August 2023 2,899 3 View
Recently I submitted the SCAPS simulated manuscript to one of the RSC journals and I have taken some of the parameters from the literature as all the SCAPS papers have done the same. can anyone...
15 August 2023 2,560 0 View
Aflatoxin concentration Zon toxin concentration Ochratoxin concentration
25 July 2023 1,636 4 View
in a typical MFC H+ ions will form in anode chamber. it is supposed to go through the membrane to the cathode. many of the research papers use CEM. how is it possible, since H+ and NH4+ are the...
14 June 2023 2,798 1 View
Currently, I am working in microbial fuel cells I want to collect secondary data and analyse it to make a predictive model. while collecting I can't find all the data in verbal form. they were in...
14 May 2023 1,000 2 View
I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...
10 August 2024 3,629 1 View
I'm currently working on calculating the collision cross section (CCS) for various ions, and I'm facing challenges when dealing with sodiated and multiply charged ions. Most of the resources I’ve...
08 August 2024 8,329 0 View
I have been using paraffin, but the deposited ZnO still detach from electrode. What is the best binder to modify graphite paste electrode with ZnO nanoparticles?
03 August 2024 4,624 3 View
I am currently working on a project involving liposomes and need to determine the maximum volume of siRNA that can be added to a 2.5 mL liposome solution with a total lipid concentration of 10...
30 July 2024 6,420 1 View
My screen printed electrode CV is given here. For Nerstean one electron reaction the delta E value should be close to 57 mV and ration of Ic/Ia should be close to 1. I did CV of my screen printed...
30 July 2024 4,671 3 View
We are working on biopolymeric hydrogels. Our system is highly viscous and sticky, and the gel formed are high in strength. We are unable to use pH electrode and pH strip. Please suggest an easy...
30 July 2024 942 2 View
Please note it
29 July 2024 4,920 3 View
Dear All, here is my question: if I have a 15-scans cyclic voltammetry performed with PalmSens, how can I obtain the charge passed during the process? Hopefully avoiding integrations,...
29 July 2024 3,733 5 View
Here, I have used Ag/AgCl as reference electrode and 0.5M KOH.
29 July 2024 4,538 3 View
https://www.cleanteqwater.com/resources/case-studies/gold-mine-australia/
29 July 2024 5,161 1 View