Can you classify structural transitions (e.g: fcc to bcc or fcc to bct ) as endothermic or exothermic?

11 July 2020 0 5K Report

I have been exploring DSC curves and have been wondering if there are any rules to phase transitions, e.g is ferrite to austenite always endothermic?

Badges
Science topic

Similar topics
Eutheria
Rodentia
Muridae
Murinae
Mice

More Deep Sm's questions See All

How can we quantify martensite in Ferrous and Titanium alloys?

How can we quantify metastable phases like martensite in Ferrous and Titanium alloys, in relation to their stable counterpart For example in EBSD, XRD, Optical? Eg, Martensite and Ferrite maps.

09 February 2021 7,911 3 View

High Entropy alloy EBSD?

What is the easiest way to generate the structure information required by oxford hkl ebsd system to identify the phases?

13 January 2021 1,590 1 View

EDS Detector calibration?

The lab I work in has an Oxford EDS detector with a Carl Zeiss Gemini. Lately, I have been sensing that the data is too off. Do EDS detectors have to be calibrated, and if how can we do it?

13 January 2021 3,494 3 View

Will the catalytic effect of retained austenite happens in steels including RA?

The catalytic effect of retained austenite refers to the phenomenon wherein quenching steels with a small amount of retained austenite, when subjected to tempering at a specific temperature...

27 July 2024 8,508 0 View

Problem with Two-phase simulation?

Hello; I am conducting a CFD study on two-phase flow in a separator, utilizing refrigerant as the working fluid. For this study, I have implemented pressure inlet and pressure outlet boundary...

25 July 2024 2,309 5 View

How to saturate steel samples with hydrogen?

I have tried to saturate ferritic steel with hydrogen using the electrolytic method and H2SO4. However, the effect was very poor even after 3 days of "saturation". Can anybody help in choosing a...

24 July 2024 4,393 2 View

Why is trifluoroacetic acid (TFA) used in c-18 column?

I would like to know the role of the TFA (trifluoroacetic acid) used on reverse phase chromatography c-18 column. It's is often used with a concentration of 0.1% on the mobile phase.

23 July 2024 8,075 3 View

Appearance of crystallization peak in heating cycle of DSC test?

For which types of polymers, the crystallization peak in heating cycle of DSC test can be observed and for which types cant? In another word, when this exothermic crystallization can be observed...

18 July 2024 348 3 View

Do you know a paper that performed an experiment on phase change material inside solar still and phase change material is in the tank below the basin?

Heat transfer

06 July 2024 2,134 1 View

Which light source should be used for photocatalytic water splitting?

I'm working on photocatalytic water splitting and the material is ferrite. The absorption edge of the material is at 700 nm. So which lamp should I use? halogen lamp or Xenon light source?

24 June 2024 6,832 5 View

Can EBSD distinguish BCT martensite from BCC ferrite? Both have different symmetries, space groups but same lattice positions??

Electron back scattered diffraction is a versatile tool for micro-structure and micro-texture analysis of a variety of materials e.g., metals/alloys, rocks, meteorites etc., EBSD completely works...

18 June 2024 1,477 5 View

Is this cell cycle analysis correct?

When I applied the cell cycle algorithm to these two samples in FlowJo, I encountered some concerns regarding the accuracy of the fit. The images include both a control and an apoptosis-inducing...

18 June 2024 1,984 0 View

I am modelling resistance spot welding (2d) in comsol, so how to get nugget formation ?

I am using apparent heat method for simulation

14 June 2024 4,670 1 View