Ansys fluent : Can you share the steps to solve Multiphase analysis problem in Ansys Workbench.?

Its a research problem where air and water are interacting inside the cooling pad.

25 December 2020 7,148 3 View

What is the best practical approach to improve the enzyme heat stability in aqua feed processing temperature?

Enzyme heat stability is one of the key factors in enzyme feed manufacturing applications. But due to high temperature feed manufacturing process in aqua feed, there are constrains in enzyme...

29 November 2020 731 3 View

Is it possible to use \begin{verbatim} under beamer in Latex ?

under the \documentclass{beamer}, I could not write something in between \begin{verbatim} \end{verbatim}. However, it is possible to use under \documentstyle[12pt]{article}. is there any...

15 June 2020 8,665 7 View

How long a methane cylinder (50 kgs) will last, if it is continuously used as reagent gas in GCMS ?

We are using GC-CI/MS analysis for our research work. We just wanted to know how long the cylinder will be used.

07 August 2019 689 3 View

Howdy Peers ! I just wanted a quick suggestion on selecting an ideal EEG recording and analysis equipment for Rodent sleep studies ?

b, Frequency band width ( based on Niquest Frequency)e specs which are deemed to be necessary for rodent EEG recording with associated bio analyzers (temperature, pressure, Heart rate etc). What...

19 June 2019 4,296 1 View

How to calculate the theoretical surface area of a Crystalline porous polymer (COFs) in Materials Studio?

Researchers use Materials Studio to calculate the theoretical surface ares of crystalline porous materials. How it is performed ?

10 December 2017 7,522 2 View

How Aqueous ethanol reacts with Graphene Oxide ( in terms of Optical properties of GO) ?

Hello all, I am curious to know, whether reaction of aqueous ethanol with graphene oxide can change (refractive index properties) of Graphene Oxide ? "Absorbance response of a graphene oxide...

25 October 2017 9,121 1 View

Does porous-spongy like particles have shape factor ? If yes, may i know the range ? or calculation procedure ?

12 December 2016 9,025 2 View

How to compare Spearmans rank coefficients across groups ?

04 October 2016 768 7 View

Bicycle model - phase of Lateral velocity estimation?

30 August 2016 3,194 3 View

Heat exchanger with liquid Nitrogen as coolant?

I want to cool Natural Gas from 195 Kelvin to 138 Klevin in a heat exchanger by using liquid nitrogen as the coolant medium. When entering the heat exchanger, the liquid nitrogen will have a...

01 March 2021 6,450 5 View

How to get/count refractive index in gasses?

20 February 2021 8,202 6 View

How to make Fast Green FCF from powder?

Hi everyone We need Fast Green to electroporate plasmid into mice embryos, therefore we simply need it to see some color in the liquid we are electroporating so that electroporation is more...

07 February 2021 1,671 2 View

Which is the best software for the simulation of tribological properties of materials?

I want to simulate the tribological properties of solids, liquids, and fluids, please suggest good software.

02 February 2021 3,947 3 View

Does anybody work with CoolLED in fluorescence microscopy?

I have trouble with exciting wavelengths higher than 460 nm while e.g. ex with 405 nm works. Filtercubes are correc, as I used them with my old xenon lamp before... I work on axiovert200M and with...

25 January 2021 5,201 2 View

How to prepare a liquid sample for FTIR spectrum?

I have a ethanol-water 50% extract of mango peel. I purified mangiferin from the extract with filtration and precipitation. so i obtained a low concentrated extract which i want to se the IR...

24 January 2021 8,880 7 View

Why high voltage and current (and some gases) Cause Spray-mode metal transfer in Gas-Metal Arc Welding (GMAW)?

This transition phenomena of Globular to spray mode as voltage , and especially current is raised, is very commonly known to Manual Metal Arc Welding (MMAW) and Gas-Metal Arc Welding (GMAW)...

20 January 2021 7,984 2 View

Can you have pressure inlet and velocity inlet at the same time?

I was reading a reference (Reitz-A Photographic Study of Flash Boiling Atomization). In his experiment, his boundary condition is delta p and constant velocity. The liquid injection pressure was...

18 January 2021 842 9 View

How can you confirm new liquid FTIR cell fits calibration?

We have an FTIR instrument which was calibrated in transmission/absorption mode using a set of cells for different ranges of D2O concentration. One of the cells at high range broke and the new one...

16 January 2021 4,791 2 View

Where can I find these two papers?

14 January 2021 1,572 3 View