I have sodium/potassium salt of substituted salicylic acid. HPLC is not giving me concurrent results. Can someone help me with analysis method for the same.
Your information is scarce: but that may be related with the buffer presence or not and its composition,
Thanks Jorge.. No i have not used any buffer..
We can help you better if give us more information about the chromatographic conditions you are using.
Hi Roberto, I am using methanol:water:Phosphoric acid (75:25:0.1) in reverse phase @ 260 nm.
I would try a stronger acid such as TFA and a litlle bit higher concentration, good luck
i am getting well resolved peaks. However, the problem is the peak area vary for each injection.
Use of an internal standard will resolve the issue. Regards
I extracted benzaldehyde from reaction mass (organic) by sodium bisulphite wash. How to recover benzaldehyde from aqueous solution?
01 February 2015 3,492 4 View
I am already passing the mixture through water but still some HCl remains. I have to use SO2 by removing HCl.
05 June 2014 6,879 5 View
I have a potassium salt of phenol (prepared by reacting phenol and KOH) in organic solvent immiscible with water. How can I determine free alkalinity in mixture?
02 March 2014 5,450 3 View
I have several molecules, each with 2 chlorine atoms and all of them are showing M-1 value in their respective EI spectrum. Checked with NIST library, there too it is same.
09 October 2013 7,873 4 View
We have dimethylacetamide as solvent in reaction. Does anyone knows a method to remove/ recover (preferred) it from reaction. We can not use water.
02 March 2013 1,637 5 View
03 March 2021 8,272 1 View
I have dataset which shows the length of power lines. I need to classify the lines based on the line length. Is there a rule to classify the High voltage (HV) and low voltage (LV) lines based on...
03 March 2021 4,116 4 View
I am using a 2707 waters HPLC device. When I try to inject a sample, it says missing plate or rack. I changed the needle and calibrated its position but I still get the same problem. I even get...
02 March 2021 1,408 1 View
(This statement is from wikipedia, BTW). What is so special about metallic bond that is limiting high-P low-T state of a matter (as long as individual atoms exist, not white dwarf of neutron star...
02 March 2021 3,309 2 View
Hello! I'll do a size exclusion chromatography, but I only have an open column, and I'll perform the peptide extraction from yeast, using buffer lysis (sodium phosphate 50 mM/NaCl 30 mM/DNAse and...
01 March 2021 2,215 2 View
I am going to have 3 different probes in my qPCR work that I am going to do. But I realized that the machine we have in the lab is a Rotor-Gene Q 2plex HRM Platform, saying it has green, yellow,...
01 March 2021 8,544 1 View
I have designed reflectarray element to generate OAM beams at 5.8GHz and feeding it though Horn Antenna on HFSS. After full wave simulation, i am not getting desired results i.e Radiation pattern...
01 March 2021 9,701 5 View
Hi, I am running a size exclusion chromatography experiment with a buffer containing Potassium Acetate as a salt. I analyse these fractions through SDS-PAGE. After boiling my SEC fractions in...
01 March 2021 2,622 3 View
I am doing my thesis on the nutrient deprivation on the macroalgae Rhizoclonium sp. I will be analysing the levels over a period of roughly 5 days by HPLC-UV and GC/MS. I will be using seawater as...
28 February 2021 6,477 1 View
I have designed a 24 GHz rectangular antenna on HFSS 3D model and got desired results while desing the same antenna with same dimensions I am getting resonance frequency at 27 GHz I am...
28 February 2021 4,426 2 View