Can some one suggest me how to design a nozzel or extruder for Fuse deposition modelling 3d printing machine ?

More Ghulam Mustafa Narejo's questions See All

Can we use 30%hydrogen peroxide for catalse activity? If can, then why?

The question us regarding catalase activity check of bacterial strains. I saw an article in which it was written that we can use 30%hydrogen peroxide for catalase activity but in our laboratories...

12 July 2024 8,794 2 View

How we can use AI in plant identification and botany?

28 June 2024 8,807 3 View

How to calculate current density ?

I am using a rectangle Ni foam electrode area: (0.5 * 1 = 0.5 cm2) for OER and applying material to the area (0.5 * 0.5 = 0.25 cm2) and depositing the same area in the solution. Now, do I need to...

29 May 2024 1,454 5 View

Why Peroxide value increase in refined vegetable oil.?

at the time of filling the peroxide value is 0.5 however it increases with the passage of time. we have never faced such problem in past. please someone assist me in this regard.

22 May 2024 6,296 2 View

Question 2 What is the average daily solar radiation (kWh/m²/day) measured in the month of August?

August ( 6.29 ( kWh / m2 / day )

22 May 2024 8,274 1 View

Assistance with CTU-UHB Dataset Import for PhD Research?

Dear Researchers, I hope this message finds you well. I am conducting PhD research in Computer Science on fetal heart rate analysis. I am encountering difficulties in importing and using the...

19 May 2024 2,414 3 View

Can somebody explain me about this "NaCl-KCl (8 g), a molar ratio of 1:1 and an eutectic temperature of 657 °C"?

I want to prepare a photocatalytic material Bi3TiNbO9 nanosheets and the authors mentioned NaCl-KCl (8 g), a molar ratio of 1:1 and an eutectic temperature of 657 °C as a one component. So, kindly...

04 May 2024 9,282 1 View

What is difference between preservation and conservation?

26 April 2024 8,311 10 View

Any manual on digitization of herbarium specimens?

26 April 2024 2,065 2 View

Why the FTO showed high performance for pollutant removal in PEC system as compared to photocatalyst in the presence of PS or PMS oxidant?

The synthesized photoanodic material showed insignificant performance for persulfate (PS) or peroxymonosulfate (PMS) activation along with pollutants removal from wastewater. What are the main...

22 March 2024 985 0 View

Can you suggest reliable sources defining "3D mesh" and "3D city models"?

Dear fellow researchers, I am currently working on a paper where I need to provide a reliable reference that defines and distinguishes between 3D mesh models and 3D city models. Although I am...

06 August 2024 9,986 2 View

What are the shear and normal stiffness values of an LLDPE liner in 3D numerical modeling of a stockpile?

I am seeking experimental or applicable data for the liner (LLDPE) interface in FLAC3D numerical modeling of a large stockpile. Could you please recommend suitable references? The preferred data...

05 August 2024 3,665 0 View

How to find a reaction is reversible or irreversible in CV? How to know the number of electrons transfer?

My screen printed electrode CV is given here. For Nerstean one electron reaction the delta E value should be close to 57 mV and ration of Ic/Ia should be close to 1. I did CV of my screen printed...

30 July 2024 4,671 3 View

CAD File of human's & rat's respiratory airways ?

Dear all, I am working on particle deposition in human's & rat's respiratory airways using CFD and I am looking for the 3D CAD file for my simulations (STEP or IGES format). If somone has such...

29 July 2024 1,092 2 View

Prevent sedimentation and maintain the suspension of powder particles in the resin ?

Hello, I am experiencing an issue with mixing micro powder with resin in a 3D printer. The problem is that sedimentation occurs after a short period (about half an hour to an hour). Could you...

23 July 2024 1,672 0 View

Cell optimization in 1D Nanotubes?

Dear All, I use Quantum Espresso. I want to optimize the structure of the carbon nanotube using the vc-relax. I got confused about how to fix cell_dofree here. For 3D, cell_dofree = 'all' or...

22 July 2024 5,708 0 View

Is it possible to manufacture polypropylene sheets using a biaxial process?

I know that films and other low-thickness laminated products are produced using biaxial orientation, but is there something similar for sheets with a thickness of around 6 mm? Or are they...

21 July 2024 1,559 1 View

How to classify 3D Bioprinting as a part of Additive Manufacturing?

Hello, I have a problem in classification of "Additive Manufacturing" techniques. There are several classification for Additive Manufacturing e.g. Powder, Extrusion, Resin etc. Actually, I am OK...

15 July 2024 139 3 View

Why am I seeing only one initial maximum in torque-time curves for the fusion of PVC in a Brabender?

We're studying the stability and fusion behavior of multiple PVC compounds in a Brabender. After a few trials, we set the temperature at 195 °C and the rotor speed at 70 rpm. Samples differ in...

12 July 2024 2,768 1 View

Which software use to i make this graph quickly and also make more dimensions of this graph( i mean adding vertices or lines in this graph)?

Anyone kindly tell the name of software that make this graph quickly and also tell how we add vertices or lines in this graph with equal distance to get next dimensions of this graph ( i mean how...

11 July 2024 4,499 2 View

Renan Bonnard

Hello,

Some interesting ideas here: https://www.youtube.com/watch?v=ocgPAAJouPs

Regards.

Renan

Ghulam Mustafa Narejo

Thanks

Dan Granett

Computer-aided multiple-head 3D printing system for printing of heterogeneous organ/tissue

https://www.youtube.com/watch?v=COavdl3QUYU

Cassidy Silbernagel

Perhaps look at getting something from a company that already sells this type of setup which can install on almost any FDM machine.

http://e3d-online.com/Cyclops