What is the best method for tracking the sun position, is-it by solar position calculation along the day of the year or by other method?

In solar energy application, often we should know the sun position at each instant. With the sun position calculation, I think we can establish a database for this purpose. Then we can use-it for...

31 December 2014 7,264 12 View

In multilayer PV solar cells, how can I choose the materials (gap and contact type) in order to increase efficiency ?

When the PV solar cell is used in a multi layer form, the goal is to benefit of a large interval of solar radiations. I think that the gap and the contact of different layers must have certain...

31 December 2014 3,584 4 View

What is the energy value of a phonon generally measured in an indirect transition?

Is it possible to obtain a phonon energy of about 425 meV, or is it an indirect transition assisted with more than one phonon?

11 December 2014 6,267 1 View

Why we use the term of "optical constants" of a material in spite of their variations ? is-it by misnomer ?

Optical constants as well as the gap, represent the signing of a material. They must be specific for this material. However, optical constants depend of the size of the crystallites which form the...

11 December 2014 5,742 3 View

Can we predict barrier potential in a contact metal-semiconductor or semiconductor-semiconductor using a theoretical approach ?

From band structure obtained with an existing calculation method , can we reach the result relating to the contact barrier between two materials ?

11 December 2014 5,487 13 View

There are much old films which are colored later. How we proceed to retrieve the suitable color for original picture ?

There are much old films which are colored later. The obtained result seems to be satisfactory. The colors can be different from the originals but it is sufficient for mistaking the human eyes....

11 December 2014 8,546 1 View

The IR radiations are harmful for the performances of photovoltaic solar cells; how is-it possible to eliminate these kind of radiations ?

Among the parameters which decrease the efficiency of the photovoltaic solar cells, we can note the solar IR radiations. This kind of radiation increases the temperature and then disturbs often...

11 December 2014 447 17 View

Is it possible to obtain a natural colored image using electron microscopy or ecography ?

Until today, a good colored image is obtained using exclusively light. Electron microscope uses electrons and echograph uses ultrason. That gives only gray images.

10 November 2014 7,733 11 View

What kind of chemical products are generally used in order to target a given thin film by the CBD technique?

08 September 2014 9,211 2 View

What is the best chemical solution which can be used to obtain tungsten oxide in the framework of chemical bath deposition (CBD)?

Especially to target the WO3 oxide.

02 March 2014 2,843 2 View

Why can't make aluminum nitride film successfully by use sputter?

We use reactive sputtering process to make aluminum nitride film, and want to make c-axis aluminum nitride film on a silicon substrate, but the crystal orientation cannot be seen with...

03 March 2021 7,975 3 View

What are the new 2D nanomaterials were used for Silver nanoparticles stabilization?

In the stabilization of AgNPs are vital in current research interest. However, some of the 2D nano-materials like graphene oxide, MoS2, etc... previously used to stabilize it. But still they shown...

01 March 2021 2,207 3 View

How to check the uv-vis absorption of nanoparticle by surface plasmon resonance?

I try to check the uv-vis absorption of Indium nanoparticle. Now I am measuring in solution, can I measure it in the form of a film?

01 March 2021 930 3 View

Apart from Nanosilica and CNT's what are the other nanomaterials readily available to use in concrete mixture?

Nanotechnology in concrete materials

01 March 2021 3,379 3 View

What is the density for pva electrospining?

I'm Juan Carlos, a high school student who is working with electropinning, I made an electropinning machine with a 21g needle and a 30kv high voltage source and the distance between my needle is...

28 February 2021 298 3 View

1 nm thick MgO thin-film to be deposited on Si wafer using thermal evaporation. What will be the optimum deposition conditions?

Favourable conditions of base pressure, rate of deposition. Also, by which characterisation technique to be used to verify the thickness of the deposited film.

28 February 2021 3,640 3 View

POlymer+DMSO solution and moisture??

What could be the reason of moisture at the sides of Vial when I am preparing my polmyer+DMSO solution for membrane fabrication? What etiquettes I am possibly missing here?

28 February 2021 6,516 5 View

LEDs on Vis Light photo degradation of MB water sol via N doped TiO2 in a mini flume?

Good day to all, I have no experience with light emitting diodes. I am building a glass mini flume to demonstrate the photo degradation of Methylene Blue in water running over self cleaning...

26 February 2021 4,026 5 View

How to prepare a thin polymer film by post-polymerization/crosslinking?

24 February 2021 2,362 5 View

How to delaminate copper in water-based anodes?

Hello everyone, I'm looking for a way to delaminate copper current collector of water-based anodes in Li-ion batteries without damaging the graphite film. I tried different materials such as HNO3...

24 February 2021 3,785 3 View