Can anyone suggest standard samples for performing time lapse imaging?

More Roobala Chelladurai's questions See All

Is it possible to recycle the Shampoo?

I have heard that the shampoo which is about to expire can be recycled into to cleaning agents etc. Is that possible ? What is the process? Also, most of shampoo has oil in it. So, how will the...

16 August 2023 9,658 2 View

Precedure for cleaning TGA crucibles?

We performed a few TGA measurements on MOFs and faced severe contamination of crucibles at the end of the tests. Please let us know an effective cleaning procedure to follow. We tried Aqua regia...

25 October 2022 4,183 3 View

I have to publish the full manuscript in same journal or shall I publish in it different journal?

I published a abstract in conference proceedings..

02 May 2020 2,831 5 View

Are there any specific sub-phase conditions to be maintained in case of DPPG monolayer?

I am facing some issue with preparation of DPPG supported monolayer and bilayers using Langmuir Blodgett technique. They are not getting transferred efficiently as opposed to PC lipids. We also...

17 April 2018 2,050 1 View

Is anyone having the design guidelines for clutch housing with ventilation concept?

If you have the design guidelines for clutch housing with ventilation concept, kindly share me the guidelines. For my project heat dissipation is more. So we are planning to ventilation in the...

18 February 2018 3,609 0 View

Is it possible to include damage model into the Viscoelastic material model?

I'm trying to simulate Adhesive failure using Abacus.

11 October 2017 1,416 0 View

What are the calculation has to be done for clutch(car)

Like Heat stress, clamp load and pedal effort

22 June 2017 9,700 3 View

In my project clutch heat stress( Calculated) exceeded , is there any possible to reduce the heat stress without changing the vehicle specification.

Like surface roughness, coefficient of friction

22 June 2017 3,652 4 View

Any one give the clutch and release system design manual

1. Clutch heat stress calculation2. Clutch clamp load calculation3. Pedal effort calculation4. Pedal assistance calculation

22 June 2017 4,255 2 View

How to calculate mean molecular area(MMA) for binary / ternary surfactants in Langmuir trough?

We are using KSV NIMA Langmuir trough for forming Langmuir monolayers. If we can input the molecular weight(M.W), volume(v) of solution and corresponding concentration(c), MMA is calculated from...

02 April 2017 4,770 3 View

How can I prepare virus for a TEM or SEM imaging?

I have virus (viral hemorrhagic septicemia virus) in suspension and the experiment will not involve cells. What level of TCID50 is preferred?

11 August 2024 3,115 1 View

What precautions should be taken while handling S. aureus enterotoxin Type B in the lab?

I would like to understand potential safety concerns while handling SEB in the lab. Especially while working in animal house facility. Would like to know precautions for handling. Sigma MSDS...

07 August 2024 6,034 3 View

Is there anyone with experience in TEM analysis who can assist with a manuscript for an upcoming journal?

Hello dear colleagues, We have prepared a manuscript on NiTi-based alloys and are seeking a second opinion on our current TEM results. If you are a Ph.D. holder with experience in TEM and have...

07 August 2024 9,563 0 View

Are there any instruments for studying time similar to the way it is in space?

There are a huge number of methods for studying objects in space, according to the senses (and not only). Mechanical, thermal, optical, acoustic, electrical, magnetic, based on particle beams,...

06 August 2024 7,102 0 View

How to understand this crystallographic phenomenon of low temperature crystals in zeolite?

During low-temperature testing, new diffraction peaks that appear could be indicative of several phenomena. In one of our tests, we observed notable new peaks around 40° and 45° in a specific...

06 August 2024 726 3 View

Weak DAPI staining after immunohistochemistry - how to improve?

After immunohistochemistry of previously fixed in PFA and EtOH and then frozen 20 μm sections of zebrafish brain, DAPI staining is very weak (right) compared to the same sections stained without...

05 August 2024 9,637 2 View

Why does the MFDFA algorithm need to calculate the profile of the time series?

As described in the Multifractal detrended fluctuation analysis (MFDFA) algorithm, it at first calculates the profile of the time series, and then other steps are operated on the profile....

05 August 2024 9,366 2 View

How can i do multivariate Time Series forecast using MLP, ANFIS and LSTM?

I need the python code to forecast what crop production will be in the next decade considering climate and crop production variables as seen in the attached.csv file.

05 August 2024 2,977 3 View

Is there any machine to do real time pcr?

I want to know how do you make real time pcr solation ? is there any machine to make it? thanks for answering

05 August 2024 1,660 0 View

How to isolate lymphocytes from mouse spleen?

I have tried several times to isolate lymphocytes from mouse spleen, but all attempts have been unsuccessful. I tried most available protocols. I used different dissociation media (HBSS with Ca...

04 August 2024 9,913 7 View

Adam Wollman

Diffusing fluorescent beads. You can calculate diffusion coefficient from size of bead and compare to what you measure.

Vincent Kam-Wai Wong

You may try monitor the HUVEC cells migration by using the tracking measurement.

It is quite simple and easy to do it.

Szemán-Nagy Gábor

Just try to use diluted red blood cell suspension.