Best Chemical Solution or acid for the cleaning of Boiler tubes and shell?

11 November 2018 0 7K Report

Respected Sir,

If we are cleaning the boiler tubes and shell by boiling out method, which one chemical or acid is best suitable? What quantity of acid should be mixed with water solution for effective results?

Kindly give your suggestions.

Thanks and best regards.

Badges
Science topic

More Sandeep Kumar's questions See All

Why the Piezo ceramics are more flexible?

Respected Sir, As we know, the ceramics are brittle in nature, if we add polymer and ceramics in piezo ceramics, then the material behaves as flexible. What is the main reason behind it? Kindly...

01 February 2019 2,138 4 View

What is the method to extract absolutes from steam distilled essential oil?

Respected Sir, if we have the steam distilled essential oil and we would like to extract the abosutes from it, what should be the exact method of extraction and what are the various factors that...

11 December 2018 3,645 3 View

List of Instruments required for essential oil measurement and testing Lab?

Dear Sir, kindly give your valuable suggestion for the mandatory instruments requirements for the Essential Oil Testing laboratory

11 December 2018 5,759 2 View

What should be the exact temperature and pressure for hydrodistillation of cedrus deodara (cedar wood essential oil) during hydrodistillation ?

Kindly give some suggestions and references related to it.

10 November 2018 6,788 3 View

Best techniques to find the chemical constituents of natural products and Cedar wood essential Oil?

As we know the GCMS (Gas Chromatography Mass Spectoscopy) is genrally used, but i am interested to know the latest techniques to measure the chemical constituents of natural products and essential...

10 November 2018 742 4 View

Essential Oil Safety- 2nd Edition (A guide for health care professions)?

Respected Sir, If someone has PDF version of the above mentioned book. Kindly forward it.

08 September 2018 6,228 0 View

How we can calculate the RMSE (root mean square error) between the training error and testing error in ANFIS modeling?

This question is related to ANFIS modeling. Kindly give your suggestions.

05 June 2018 1,366 8 View

Is there any standard method to divide the training data and testing data in ANFIS modeling?

on what basis the no. of epochs are selected? is there any influence of no. of epochs on output results? kindly give your suggestions.

05 June 2018 9,617 3 View

What is the standard procedure to produce the Al-Lithium alloy?

What are the various controllable parameters? Standard Procedure to produce the Al-Li alloys for industrial application. Kindly suggest me some references related to the processing of AL-Li alloy.

05 June 2018 7,132 2 View

Abrasive and Nano particles that can be mixed with dielectric medium to improve the machining performance in thermoelectric micro machining?

Kindly give your suggestion.

04 May 2018 6,683 4 View

Chlorinated organic formation in odor control scrubbers using hypochlorite?

I'm involved in a study of odor control technologies for municipal wastewater treatment plant. One of the control options involves a chemical 2-stage (acid/alkaline) packed bed scrubber. The...

03 March 2021 3,661 2 View

What solvent can I used for Paal Knorr reaction between 6-amino hexanoic acid and 2.5 hexanedione?

I am try to make the Paal Knorr reaction between 2.5 hexnedione and 6-amino hexanoic acid, my problem is type of solvent to use, because 6-hexaminohexanoic acid is soluble in water but I am not...

02 March 2021 4,443 2 View

Ester cleavage conditions?

Hi all, I need to cleave the ester in Ethyl 2-amino-1H-imidazole-5-carboxylate to make the carboxylic acid and retrieve the product from solution to use in downstream applications of linking to...

01 March 2021 8,766 3 View

Why the results when using wall thickness and when using shell conduction are different in ansys fluent?

Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...

01 March 2021 9,537 2 View

How to remove DCU and HOBT from my reaction?

I am doing a acid and a chiral amino alcohol reaction using DCC and HOBT in DCM or THF? Can anyone suggest me how to remove DCU and HOBT from a reaction mixture??

28 February 2021 2,153 1 View

What is the most common number of epitopes in an multi-epitope Vaccine?

hi everyone, I'm interested in the field of vaccine design specifically multi-epitope cancer vaccines , I want to know if there is a minimum and maximum number of epitopes we could use in a...

27 February 2021 3,882 3 View

How to increase solubility of Poly acrylic acid in Dioxane solvent?

I am working with Polyacrylic acid (100.000Da) and instead of water, I need to use another solvent (dioxane) to dissolve PAA. However, because of the high molecular weight, it's quite hard to...

25 February 2021 2,225 5 View

How do you mesh a thin solid in Fluent?

Hello, I have used the shell function on SpaceClaim to create thin solids for the model I am studying. These are contained within an enclosure for my study. I chose this approach as it avoids the...

24 February 2021 8,856 3 View

Why is NH4OH added in heavy metals limit test?

The limit test I'm referring to is USP method II. In this procedure you need to dropwise add 6N of NH4OH to the sample until it the pH is alkali. After that you need to dilute and add HOAc until...

23 February 2021 2,049 3 View

Is it efficient to do liquid biopsy to investigate the gene expressions of the tumor?

To do liquid biopsy and look for specific gene expressions there are so many published papers. Thera are different protocols and procedures used to isolate circulating cell free RNA or mRNA from...

23 February 2021 7,326 5 View