Are there any tutorials for floating wind turbine design and modeling with OpenFAST ?

08 January 2022 0 3K Report

I am planning to conduct my PhD project in the analysis of floating offshore wind turbines and I need to have an insight about OpenFAST modeling. I appreciate if anybody can share any useful material. Thanks!

#offshore #offshorewindenergy #offshorewindturbine

Badges
Science topic

More Peyman Sabbahfar's questions See All

Comparing ATP Production Rates: Chloroplasts vs. Mitochondria in Photoautotrophic Cells?

In photoautotrophic cells under light conditions, what proportion of the total ATP is generated within the chloroplasts, as a rough estimate or within a lower and upper bound, and what proportion...

14 May 2024 6,492 2 View

"What subject should I choose for my doctoral thesis?

Hello, I am a PhD student in geography and rural planning. I am at the stage of choosing the topic of my thesis. I need your help all over the world to choose the topic.

07 May 2024 7,131 12 View

Choosing the subject of the doctoral thesis?

Hello, I am a PhD student in geography and rural planning. I am at the stage of choosing the topic of my thesis. I need your help all over the world to choose the topic.

07 May 2024 8,886 6 View

With what compounds can all the metal complexes formed with cyanide be precipitated? Is there a combination that precipitates all the metal complex?

A combination of copper sulfate and zinc sulfate can it ?

10 November 2023 4,027 1 View

What is the difference between the performance of lime and caustic soda in cyanide leaching operations?

Adding lime in the process, apart from the formation of calcium sulfate compound in the neutralization stage with sulfuric acid,if have the negative effect on the precipitation process of metals...

10 November 2023 5,776 2 View

We use Navarro–Frenk–White (NFW) to calculate Dark Matter (DM) density. Can we use it for DM halo in any galaxy or is it used only for Milky Way (MW)?

Does NFW profile work for any galaxy?

08 September 2023 4,435 5 View

Considering the production of DM in another galaxy, how can I calculate "Dark Matter density" there (e.g., at special redshift)?

Calculating Dark Matter density in other galaxies rather than Milky Way

05 September 2023 1,468 0 View

Is it possible to calculate standard error for each mean from pooled standard error (SEM)?

If we have 4 treatments for a trait and a SEM (pooled SE) for these treatments' mean, how to calculate SE for mean of each treatment from SEM?

18 March 2023 3,587 3 View

How can we predict oocyte quality?

I suggest to read this new Review Article from me. Deeply, we categorized non-invasive engineering based approaches for predict or select oocyte by means of their quality. Oocyte quality...

13 December 2022 5,276 7 View

Any advice on MSCs differentiation?

We did in vitro differentiation of MSC cells into osteogenic and adipogenic lineage cells using STEMCELL kit. The protocol recommended to use culture-expanded human MSCs between passages 1 - 4...

07 December 2022 8,063 5 View

How can I prepare virus for a TEM or SEM imaging?

I have virus (viral hemorrhagic septicemia virus) in suspension and the experiment will not involve cells. What level of TCID50 is preferred?

11 August 2024 3,115 1 View

Handling Missing Data and Building a Predictive Model with Incomplete Information ?

I am developing a predictive model for a water supply network that involves 20 influencing points. However, I only have historical data for 10 out of these 20 points. I would like to know how to...

10 August 2024 4,005 2 View

Is it possible to use the Fused Deposition Modeling (FDM) to additively manufacture interconnected porous structure generation of >100-200 micrometer?

Usually, additive manufacturing techniques like SEBM, SLS, and SLM are used for interconnected porous lattice structure generation with sizes of >100–200 micrometers. Can the Fused Deposition...

09 August 2024 7,892 0 View

How to define an anisotropic material with asymmetric elastic compliance/stiffness matrix in ANSYS APDL?

I need to model an anisotropic material in which the Poisson's ratio ν_12 ≠ ν_21 and so on. Therefore, the elastic compliance matrix wouldn't be a symmetric one. In ANSYS APDL, for TB,ANEL...

09 August 2024 5,048 2 View

How can I apply boundary conditions in an orthotropic steel deck numerical model using ABAQUS software?

I am trying to simulate vehicular loading on an orthotopic steel deck bridge section in ABAQUS software. The red arrow mark in the attached figure indicates the direction in which the vehicle will...

08 August 2024 719 0 View

Can you suggest reliable sources defining "3D mesh" and "3D city models"?

Dear fellow researchers, I am currently working on a paper where I need to provide a reliable reference that defines and distinguishes between 3D mesh models and 3D city models. Although I am...

06 August 2024 9,986 2 View

Please explain how the plastic input value should be considered from the true stress-strain curve for the bilinear elastoplastic material model ?

I am working on Abaqus/Explicit(Quasistatic ) for the deformation of the auxetic structure model. Please explain how the plastic input value should be considered from the true stress-strain curve...

05 August 2024 454 3 View

What are the shear and normal stiffness values of an LLDPE liner in 3D numerical modeling of a stockpile?

I am seeking experimental or applicable data for the liner (LLDPE) interface in FLAC3D numerical modeling of a large stockpile. Could you please recommend suitable references? The preferred data...

05 August 2024 3,665 0 View

Is it necessary to covary exogenous constructs in a structural model?

I am working on a SEM model where i have 7 latent variables (6 exogenous and 1 endogenous). In AMOS when I co-vary the exogenous constructs, only 2 paths are coming significant out of 6. But when...

03 August 2024 6,028 4 View

In WECS : Gain values for conversion of PMSM rotor speed(rad/s) to p.u. input to wind turbine and Torque(pu) of WT to input of PMSM-Torque (Nm) ?

I am working on developing a MATLAB Simulink model of Wind turbine with PMSG followed by MPPT Boost converter. I have gone through so many literature and videos but I am not finding clear solution...

03 August 2024 888 1 View