Anybody have a study about a determination of sulphure in molten steel?

12 December 2017 1 6K Report

anybody have a study about a determination of sulphure in molten steel?

My dear Yusdel Diaz ;

During steel making there are three major activities viz: melting ,refining and vacuum degassing.Normally oxygen and hydrogen contents are checked using Celox and Hydris probes , all other alloying elements and residual tramp elements present are checked off line by optical emission spectrometer and atomic absorption spectrometer by taking taking liquid steel samples at periodic intervals.

Regards

Shivraj Singh Kasana

Badges
Science topic

More Yusdel Díaz's questions See All

Someone has some information about the optimization of the steel refining process in a spoon oven?

someone has some information about the optimization of the steel refining process in a spoon oven

31 December 2017 9,295 0 View

What is the best way for rolling steel process modelling?

what is the best way for rolling steel process modelling?

11 December 2017 9,690 4 View

Someone has some information about the kinetics in the process of obtaining resulfurized steels?

someone has some information about the kinetics in the process of obtaining resulfurized steels?

11 December 2017 8,089 0 View

Any way for use montecarlo methods in nonestacionary heat transfer?

any way for use montecarlo methods in nonestacionary heat transfer?

10 November 2017 5,366 3 View

What do you think about the specimen creation in solidification of steel?

what do you think about the specimen creation in solidification of steel?

10 November 2017 3,624 0 View

Chemical energy aproaching in Steel AEF?

someone can help me get some study related to the breakdown of chemical energy in steel furnaces for the production of steel

10 November 2017 8,840 0 View

How i can obtain any elastoplastic model in steel solidification?

how i can obtain any elastoplastic model in steel solidification?

10 November 2017 9,466 0 View

Some model to optimize the amount of coating of copper electrical conductors"?

some model to optimize the amount of coating of copper electrical conductors"?

10 November 2017 8,275 0 View

What is the most way by studies in modelling of heat transfer in continuous casting steel ?

what is the most way by studies in modelling of heat transfer in continuous casting steel ?

09 October 2017 479 2 View

Any idea about the heat transfer coefficient of GAP in continuos casting steel ?

i find many differents way but nothing clear

09 October 2017 9,879 1 View

What is the production process of CaFe ferroalloys?

I looking for ferro calcium production process

03 March 2021 1,755 4 View

12% ledeburitic cold work tool steel, etched for revealing retained austenite, any help for clarifying?

Hello everyone. Given microstructure image belongs to a 12% ledeburitic cold work tool steel (annealed and tempered). The sample was etched with picral (100 mL ethanol and 4 g picric acid). I...

02 March 2021 4,119 3 View

Why Austenite grains in steel show much more twinning than ferrite grains?

It is oftentimes said to be a distinctive metallographic trait that differentiates a fully austenitic and a fully felly ferritic steel without etching that might distinguish between two. Why...

02 March 2021 728 2 View

How Can I bring as much common elements in steel as possible to calculate stable phase(s) in OpenCalphad?

As I was tweaking step-by-step OpenCalphad6 Macros step1.ocm involving phase and thermal property calculation of a High-speed steel, I could not incorporate more than 6 elements in the steel...

01 March 2021 8,840 1 View

I need to accelerate corrosion in steel parts that are used in a salt-water environment. Is there a technique for doing so?

I have a structure that employs d-ring swiveling tie-downs that corrode during use and become "frozen". I have sample swivel assemblies that I wish to corrode to see if I can free them using one...

01 March 2021 3,739 3 View

Why is my platinum counter electrode getting dirty during electrodeposition?

I am conducting anodic electrodeposition of MnO2 onto a stainless steel substrate, using a platinum strip as a counter electrode. This is done galvanostatically, with the current held between 5...

27 February 2021 1,829 3 View

What kind of steel moulds are used for hot pressing metal powders?

My main concern is that the metal powders should not weld to the mold surface and I should easily be able to eject out the pressed samples. I am looking for alternative for graphite moulds. The...

22 February 2021 2,965 4 View

What are effects of steel jacketing on flexural strength?

Dear all, If steel jacketing is used to retrofit a reinforced-concrete (RC) column, can we use it to improve flexural strength? I understand that we leave gaps between the ends of the jacket and...

22 February 2021 1,906 5 View

How to model steel jackets using SeismoStruct?

Hi all, Does SeismoStruct support modeling rectangular RC columns retrofitted with steel jackets (e.g. rectangular, elliptical) ? Any suggestions for other software (apart from...

20 February 2021 4,521 1 View

Thermal and mechanical properties of concrete and steel after cooling?

How do the thermal conductivity, specific heat capacity, plastic strain, critical compressive displacement, and thermal expansion of both hot-rolled steel and concrete change after cooling based...

15 February 2021 1,385 5 View