Some model to optimize the amount of coating of copper electrical conductors"?

Yusdel Díaz @Yusdel_Diaz

11 November 2017 0 8K Report

some model to optimize the amount of coating of copper electrical conductors"?

Badges
Science topic

More Yusdel Díaz's questions See All

Someone has some information about the optimization of the steel refining process in a spoon oven?

someone has some information about the optimization of the steel refining process in a spoon oven

31 December 2017 9,427 0 View

What is the best way for rolling steel process modelling?

what is the best way for rolling steel process modelling?

11 December 2017 9,825 4 View

Anybody have a study about a determination of sulphure in molten steel?

anybody have a study about a determination of sulphure in molten steel?

11 December 2017 5,951 1 View

Someone has some information about the kinetics in the process of obtaining resulfurized steels?

someone has some information about the kinetics in the process of obtaining resulfurized steels?

11 December 2017 8,218 0 View

Any way for use montecarlo methods in nonestacionary heat transfer?

any way for use montecarlo methods in nonestacionary heat transfer?

10 November 2017 5,503 3 View

What do you think about the specimen creation in solidification of steel?

what do you think about the specimen creation in solidification of steel?

10 November 2017 3,786 0 View

Chemical energy aproaching in Steel AEF?

someone can help me get some study related to the breakdown of chemical energy in steel furnaces for the production of steel

10 November 2017 9,020 0 View

How i can obtain any elastoplastic model in steel solidification?

how i can obtain any elastoplastic model in steel solidification?

10 November 2017 9,590 0 View

What is the most way by studies in modelling of heat transfer in continuous casting steel ?

what is the most way by studies in modelling of heat transfer in continuous casting steel ?

09 October 2017 606 2 View

Any idea about the heat transfer coefficient of GAP in continuos casting steel ?

i find many differents way but nothing clear

09 October 2017 10,011 1 View

Adhesion strength of coating?

How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...

10 August 2024 942 3 View

How do I conformally do PR spin coating on trench structure?

I did PR spin coating on trench structure. I used AZ P4620 PR and the thickness or PR is around 11um. The substrate is Si. And my trench structure depth is 141um(negative way). Even though I...

08 August 2024 2,298 0 View

Why do i have a weak plasma and no coating during rf sputtering?

I have been getting a low plasma and no coating while doing rf sputtering of copper doped ZnS using a power of 140 watts and at pressure of 6.5x10-3 Mb.

07 August 2024 4,526 4 View

What is the reason I get 400nm nanoparticles using an extruder with 200 nm membrane for cell membrane coating?

I am trying to coat my micelles and PLGA based nanoparticles with cell membrane using an Avanti mini extruder according to literature . I use 200nm membrane but my particles end up to be 400nm And...

30 July 2024 3,294 3 View

Addition of EDTA during the synthesis of copper nanoparticles to prevent it from being oxidized?

I've attempted to use this method to synthesize copper nanoparticles. Copper nanoparticles can be synthesised using a variety of precursor materials. CuSO4, distilled water, NaOH, and EDTA are...

28 July 2024 8,027 3 View

What is the main used curing agent for epoxy based coating?

I am trying to coating metal oxide into steel substrate, for better sticking planning to utilse epoxy based, Could you please suggest suitable curing agent for the coating purpose

25 July 2024 438 3 View

How do you get pure primary macrophage cell culture?

I have been harvesting monocyte-derived macrophages from buffalo and cattle fresh whole blood using the same protocol for years and getting good macrophage cultures. Below is the protocol that I...

23 July 2024 4,074 2 View

Issues in coating of cathode material on Al foil, why we are not getting proper coating and results when the cathode was coated on Al-foil..?

We are trying to coat some cathode materials on Al-foil ( ex - LiFePO4 , S@CNT, etc). When we coated the Al foil with the cathode (ex - S@CNT) material , the cycling result was annoying. But the...

09 July 2024 5,123 4 View

Why NCM cathode slurry has coating problem?

I tried to make slurry for NCM cathode but there was problem in coating process. The detail of my experiment is following; The ratio between active material(NCM811), conductive additives(Super-P)...

08 July 2024 7,327 4 View

Why can't we get on top of this incubator infection (fungal)?

We have been experiencing repeated what looks very much like fungal contaminations in several incubators (in the same lab). We have tried the following repeated times and yet the coating on all...

02 July 2024 6,375 2 View