Contact experts in Semiconductor Devices to get answers
2,812 views 533 posts
Questions related to Semiconductor Devices
1.how common mode voltage measurement is different for dc and ac application? 2.for differential low voltage(microvolt range ) dc measurement using INA ,do i need to concern about common mode...
11 November 2017 8,172 4 View
How is overdrive voltage (difference between gate voltage and threshold voltage) of a transistor related to temperature? I understand that threshold voltage decreases with increase in temperature....
11 November 2017 1,098 6 View
I have not met a simpler circuit of a curve tracer than the shown below (a transformer, resistor and of course, the diode under test). Although it is a simple passive circuit, I claim it is...
11 November 2017 6,468 0 View
Can I use WBG semiconductor device to control drives. Please, give me explanations. Hoping for a prompt & encouraging reply!
10 October 2017 7,441 3 View
I have fabricated an all-inorganic QLED with FTO/NiO/CdSeZns/ZnO/Al. It has three conduction regions corresponding to Ohmic, Trap limited and space charge limited (SCLC). I expect the device to...
10 October 2017 5,583 4 View
05 October 2017 8,875 4 View
I have had some success creating meshes using GMSH, http://gmsh.info, however it is a difficult process to create realistic 2d and 3d meshes.
09 September 2017 1,550 0 View
Hello, I am currently working with gate all around nanowire transistors and I have a question regarding the eletric field in the structure. I've developed 4 different structures, made out of...
08 August 2017 5,749 2 View
No
08 August 2017 2,297 0 View
05 August 2017 4,683 2 View
Timing and power Modeling of Gate-Level Digital Circuits.
24 July 2017 4,057 2 View
Semiconductor Device and Optical communication related simulation study
07 July 2017 6,980 0 View
I have noticed that PMOS transistors have a higher flicker noise density than NMOS when bulk finfet technologies are involved.Why is that? since the mobility is more or less the same, and also the...
07 July 2017 2,731 3 View
Have anyone tried the SU8 3000 series on metals and get good adhesion? I am about to buy one bottle but I am not entirely confident that it will solve the problem of poor adhesion between normal...
07 July 2017 2,444 7 View
07 July 2017 8,408 3 View
Kindly hind process simulation code for DMG AlGaN/GaN TEGFET.
06 June 2017 3,278 0 View
I am using mask technique to grow source and drain in tft . I need distance between source and drain greater than 50 micron because mask is available more than 50 micron in lentgh.
17 May 2017 7,884 3 View
05 May 2017 9,341 3 View
Why there is sometimes current drop at high Vds in output characteristics in the OFET operation?
05 May 2017 1,114 0 View
Can anybody tell me how to calculate lattice misfit strain. There are n-numbers of literature and authors wrote about it and confused their own way. Let me say I have a film "a" which grows on...
04 April 2017 5,629 2 View
Hi, Does anyone know how to simulate a polysilicon diode in Sentaurus? I've tried use the software provided material "polysilicon" & "polySi" to run the basic forward and reverse bias...
31 March 2017 9,048 1 View
I am looking at explaining undesirable MOS behaviors in a metal-ferroelectric-structure. I recently tried characterizing the capacitance-voltage behavior of a Bi4Ti3O12/P-Si junction, using a...
06 March 2017 4,550 1 View
03 March 2017 2,750 1 View
Hi;I am rather new to Comsol and I was hoping you guys could kindly help me get started!I am trying to model a silicon p-n junction to study the transient drift-diffusion after I optically excite...
03 March 2017 1,473 0 View