A type of stress exerted uniformly in all directions. Its measure is the force exerted per unit area. (McGraw-Hill Dictionary of Scientific and... | Contact experts in Pressure to get answers
1,441 views 1,122 posts
Questions related to Pressure
i want to know the latent heat of ethanol at 30 degree temperature and also the saturation temperature of ethanol corresponding to saturation pressure
05 May 2019 7,208 1 View
To detect area of contact between two surfaces, I know tekscan and fuji film is one , any other? and where to procure them from ?
05 May 2019 2,160 1 View
Actually I want do detail design in order to calculate the exchangers area for hot and cold utilities in heat exchangers network. Do I can do detail design in order to calculate the hot and cold...
05 May 2019 5,897 3 View
material becomes p-type from n-type as the pressure is increased.
05 May 2019 7,479 5 View
Greatings all, I am currently modeling a tube impacting a plane. I am running a Dynamic explicit analysis with two deformable bodies. The problem is in 2D hence I have to use the surface to...
05 May 2019 2,710 9 View
How to find Velocity pressure and surface elevation
05 May 2019 5,066 1 View
In the attached paper, the authors assumed that hydrate is part of the pore, which can be illustrated by equation (6), Sg+Sw+Sh=1, in their paper. However, the authors described Fig.5 as "The...
05 May 2019 5,499 1 View
I'm looking for hourly record of barometric pressure for the northeastern region of USA. Any suggestions where I can get the data from?
05 May 2019 1,097 1 View
I patched the fluid domain with 1400 gauge pressure and set up the boundary condition at the outlet to be 0 gauge pressure. But I am getting floating point exception. What am i missing?
04 April 2019 3,744 4 View
How to apply surface traction boundary condition as internal pressure in pipe bend analysis in abaqus.
04 April 2019 8,571 1 View
Dear all, I hope someone help me ,i made a model by abacus of expansive soil to evaluate the influence zone of pressurize water injection in the expansive soil to determine the best place of...
04 April 2019 8,234 3 View
I want to put few oxygen into a UHV chamber at a pressure of 10-10mbar,and that may reduce the pressure to 10-8 mbar.
04 April 2019 7,544 7 View
How to create pressure differences across the membrane during NF membrane simulation by Material studio?
04 April 2019 2,061 2 View
I’m currently working on research to improve the turbine power generation by increasing the vacuum of the condenser. The condenser used in this research is direct contact spray type condenser for...
04 April 2019 4,507 2 View
An absolute zero pressure is a condition where there is no fluids or absolutely vacuum. Can we make a room or vessel to be absolutely zero pressure? Please give your comment. Thank you
04 April 2019 8,361 11 View
I have to compute the geomechanical parameters like minimum horizontal stress, maximum horizontal stress, compressive strength , vertical stress and pore pressure for better understanding the...
04 April 2019 1,164 2 View
Considering a plasma is created inside a capillary tube, I would like to inquire about the simplest way to measure the gas pressure inside that capillary tube. clarification: In pulsed...
04 April 2019 8,554 4 View
Dear friends which way is better to increase shear strength in pressure sensitive adhesive . with decreasing chain transfer agent or increasing cross linking or increasing molecular weight ?
04 April 2019 3,303 1 View
Iam working on diet analysis of carnivores with special reference to the evaluation ofpredationpressure on wild ungulates?
04 April 2019 7,635 3 View
My research interest is in developing a computer based fault diagnostics system for sub-sea production systems if there aren't any existing already. And I am looking into areas such as gas hydrate...
04 April 2019 2,037 2 View
I have couple of questions: How to find out air leakages through rectangular slit because of pressure differences? Approximate slit clearance is 100 micron and width is 100 mm. Second question...
04 April 2019 3,810 1 View
we use (Tridecafluoro-1,1,2,2-tetrahydrooctyl)trichlorosilane; 97% from abcr evaporation silanization is performed in an exsiccator which has been flushed with Ar prior to evacuation
04 April 2019 4,400 3 View
Does the human body have sound pressure receptors outside of hearing and skin?
03 March 2019 6,336 17 View
Hello Everyone, Just a small doubt on the Side Channel blower. What will happen if the Side Channel blower generates more differential pressure(vacuum) than the mentioned value from the...
03 March 2019 7,462 2 View