Hard, amorphous, brittle, inorganic, usually transparent, polymerous silicate of basic oxides, usually potassium or sodium. It is used in the form... | Contact experts in Glass to get answers
940 views 1,247 posts
Questions related to Glass
Dear all, As we all know that the rate of using display technologies has been soaring up with each passing day. The need for glass materials for display devices such as smartphones, touch...
07 December 2021 6,051 3 View
I am working on nanofiltration for different dyes removal. I synthesized pure pvdf membrane through immersion precipitation technique but it is quite weak (can be torn when taken in hand)....
07 December 2021 4,386 3 View
Dear all, I'd like to supply a sound velocity measurement setup for the synthesized glass samples in our lab. For this, is there anyone who can help me to find out a supplier? Also, any example...
07 December 2021 1,577 3 View
you know that glass fiber compressive strength is less that its tensile strength , so, its a very important to model two behavior for glass fiber, one for compressive strength and the other for...
05 December 2021 1,820 2 View
Glass, SQUID, Magnetism, Ultra low-temperature
03 December 2021 4,307 2 View
Hello, I have a question about the interaction of the glass surface (soda-lime glass) with moisture and white paper. I would like to find some sources of information (articles, publications,...
30 November 2021 2,098 3 View
Hi, I just start to work with microfluidics devices but the lab I work do not have access to any compressed air so I can not clean my cover glass really well before bonding with my PDMS. I...
29 November 2021 2,605 3 View
During total Plant Protein extraction commonly use Liquid N2 for removal of moisture from Plant parts, instead of using Liquid N2 can I use Glass beads for protein extraction, is it have any bad...
26 November 2021 8,859 2 View
Dear everyone, I'm trying to lift of the HSQ/PMMA bilayer (cylindrical shape) which is capped by AlOx and TaOx ~ 5nm thick. I tried mr-REM700 PR remover in 80 degree Celsius for 8hours and...
25 November 2021 5,149 0 View
For many smart road applications, objects detection and recognition are one of the most important components. Indeed, precise detection of road objects is a critical task for autonomous urban...
23 November 2021 4,302 3 View
Dear all, we have a single-crystal XRD-based structure showing seemingly a Cu(II) complex with two elongated axial ligands, but not one on each side of the square planar CuL4 plane, which is an...
18 November 2021 9,984 0 View
trying to find out hydrogen concentration in a thin film deposited on glass.
17 November 2021 1,864 3 View
I usually prepare the media and store it in the cold room but this time it was in the lab where UV light is applied for 1-2 hours at night. It is important that bacteria growth is the same for all...
16 November 2021 7,727 3 View
I have a micro-structured stainless steel mold and I poured Sylgard 170 into it. How to remove residual cured Sylgard 170 from the mold
16 November 2021 6,479 2 View
I need to way to antifogging method for PVA film and glass
15 November 2021 5,648 3 View
Machine learning, for example Artificial Neuron Network method has benn widely used in predicting various properties of oxide glasses in recent years, including mechanical, chemical and thermal...
13 November 2021 7,409 3 View
After treated PVA Film by microwave plasma take for sem but the film burned so the sugeest is but gold layer for take a picture for surface (sem) so i ask do the gold layer have effect in PVA...
13 November 2021 520 0 View
What is the best method for growing mesenchymal stem cells on glass coverslips/slides for immunocytochemistry?
10 November 2021 2,590 3 View
I am working on some bactericide coatings which contain various amounts of copper. The goal is to observe the bacteria-killing efficiency of the coatings with copper content and exposure time for...
04 November 2021 6,099 8 View
I am presently researching about fatigue life prediction of short fibre thermoplastics under arbitary loading.Can someone suggest me how can I stabilize the cyclic behaviour considering...
02 November 2021 2,906 4 View
Hi, dear community, I am going to homogenize bacteria with glass beads (0.1 mm), but I cannot find any documented recommendation from the manufacturer regarding the amount of beads (mg) to use...
01 November 2021 334 2 View
Are there any solved examples and outstanding arts?
01 November 2021 9,784 14 View
Dear all, I am trying to deposit Al over bonding layer on Glass to get Al mirror using RF sputtering. What should be the exact thickness of Al layer to get the stable Al mirror. Also, what should...
27 October 2021 8,602 4 View
If an expert kindly give me some detailed information on low grades ores ,where are these ores found and if there is still demand for this type of ore? If yes, what kind of low grade ore wastes...
24 October 2021 9,548 1 View