Contact experts in Concrete to get answers
2,024 views 3,715 posts
Questions related to Concrete
..
03 December 2023 6,427 4 View
42 nodes on an embedded element do not lie in any host element. Check coordinates, exterior tolerance and absolute exterior tolerance parameters, and the host element set definition. The nodes...
30 November 2023 2,006 2 View
I want to know more about coal deposits.
29 November 2023 9,847 2 View
I think excel can't analysis a data properly.
29 November 2023 2,852 0 View
How can we increase soil organic carbon of agricultural land and factors that affect the soil active organic carbon level in soil?
29 November 2023 8,299 3 View
Hello, I am facing a convergence issue (CONVERGENCE FAILURE OCCURRED IN CASE..., RELATIVE ERROR =...) when I'm running my time history analysis in sap2000. I already tried to increase the...
28 November 2023 6,610 3 View
When test force is F (mN) and an indentation depth in a sample is h (µm), dynamic hardness (DH) is defined by the following formula: DH =a*F/h^2 [kgf/mm^2] For the triangular 115 indenter...
28 November 2023 5,164 1 View
I am studying about fire resistance property of concrete. I need to know the maximum temperature that a reinforced concrete with 3000psi compressive strength can withstand. Please provide...
26 November 2023 8,041 2 View
The study is purely quantitative and intends to look into the relationship between school assessment and external assessment like BECE. The researcher intends to collect from the school...
24 November 2023 5,531 4 View
Foot over bridges cause a lot of energy loss for the people using them. Its height is the main problem for people and children and old are not so interested for using it.
22 November 2023 8,579 0 View
Hi everyone, I am planning to use ModelMuse to model potential heavy metal pollution from a recycling plant on ground water, and wanted to know what are the required data? There is no pumping...
21 November 2023 5,608 0 View
آHello all dear What reference should I use to calculate the heat transfer coefficients of plate exchangers that has step-by-step solutions?
20 November 2023 8,120 5 View
To what extend is the thermal degradation kinetics data relevant to design the pyrolytic system for a polymer composite? Can the modification of a raw polymer into composite give the study more...
15 November 2023 1,410 1 View
We are currently attempting to create a Ti/Sb–SnO2 electrodeposition solution. While we have come across various methods in the literature, there is a lack of specific procedural details. This has...
13 November 2023 6,744 0 View
The results obtained from the analysis of my study show that the average and SNR are different, which do you think I should report and what is the reason for this difference?
13 November 2023 7,067 0 View
It is my understanding that in polymers, modulating allows you to be more precise in determining both endothermic and exothermic events than when doing DSC without modulation. But because the...
10 November 2023 274 3 View
Hi, I am new here. I'm a PgDip Psychology student from the University of Derby (Online) and I also work as a Research Practitioner for Cornwall Partnership NHS Foundation Trust. I am currently...
10 November 2023 1,211 0 View
I need to find the bulk resistance of an hydrogel, for that i was told i could do EIS a 3 electrode cell. Problem is i dont know what i should use as electrolyte solution. I read a paper that did...
09 November 2023 6,268 0 View
Due to PPC, the strength gain of concrete is slower at the early stages. While OPC should gain strength of 65% of 28 days strength at the end of 7 days. Whether 45-50% strength is gained by PPC...
07 November 2023 1,309 3 View
I am simulating reinforced concrete under torsion in ABAQUS. Then I have this issue as shown in the figure. How can I eliminate the element distortion? I have tried finer mesh and a lower loading...
07 November 2023 2,959 3 View
Hello! I am trying to model a rod falling into water and the subsequent collision of the rod with the bottom (and subsequently the walls) in LS-DYNA to determine the stresses in the rod and...
05 November 2023 7,812 1 View
Evaluation of sediment flux (Qs) and grain type as signals across Sediment-Routing systems is a commonly followed practice. Why don't we consider stratigraphic architecture/pattern as a signal,...
03 November 2023 8,852 3 View
What aggregates are used for protective concrete in your country ?
02 November 2023 7,534 1 View
Does gamma radiation have a destructive effect on the microstructure of concrete?
02 November 2023 622 2 View