13 Questions 1 Answers 0 Followers
Questions related from Shujian Xue
Hi everyone, The Sprocess program took too long to complete. I read through the out file, it seems that the Warning "Polygon Box1 is already defined, redefining! ... continuing execution"...
06 August 2022 6,144 0 View
I was using Sentaurus Sde to generate structure and mesh. I need to create a better mesh in certain regions so I used the command: (sdedr:define-refinement-window "RefEvalWin" "Rectangle"...
03 January 2021 6,129 1 View
The default recombiantion rate of ohmic contact is infinitely large. Any chance I can change the ohmic contact recombinate? Thank you!
19 March 2020 4,135 1 View
I have been trying to create some perfect conductor in my simulation as a connection between 2 spots(different doping semiconductor area). But is seems that the barrier bewteen silver and the...
11 March 2020 2,793 1 View
I am trying to extract lifetime and carrier concentration informantion from the result. The create_field and probe_filed commands seems to be a good choice, however, the create_field command...
14 February 2020 4,058 0 View
In the optical solver we can use Scattering ( AngularDiscretization = 90 MaxNumberOfIterations = 150 Tolerance = 1e-3 ) But it doesn't seems to make any difference to the my...
28 December 2019 7,756 0 View
I want to simulate the light trapping effect for rough surface solar cells. Can anyone give me some guide please? I am using Sentaurus 2013.03
01 November 2019 6,488 0 View
I want to simulate rough surface with TMM method The original code would work and it was: TMM ( PropagationDirection = Perpendicular # Default Refractive NodesPerWavelength = 20...
19 October 2019 4,605 2 View
I am starting to simulate the anti-reflection coating (ARC) for solar cells but I found some problems that I can't answer: 1, For solar cell without ARC, I tried to put the light source below...
04 July 2019 6,851 2 View
About the sentaurus mixed-mode simulation, the only example I have is the one on the menu of "Mixed-Mode CMOS Inverter Simulation" which is not very clear. I am wondering if I have a single...
22 May 2017 5,138 3 View
My sentaurus simulation of solar cells usually don't converge at the part after the illumination. So before the doesn't converge part, the last successful part is the finishing of Raytracing...
12 May 2017 7,876 1 View
The simulation I ran often doesn't converge, always the RHS "right hand side" over 1e10. It can be I changed the length of the terminal, the carrier recombination velocity, the light intensity or...
08 March 2017 9,810 6 View
I am not using sentaurus workbench but the other way. Right now I am simulating a simple 2D sillicon PN junction solar cell with no edge effect (recombination etc). The contact is perfect so no...
11 January 2017 4,245 1 View
