Will the adsorbent prepared (material containing amine impregnated chitosan) be stable in acididc solution?

06 June 2014 0 8K Report

Actually chitosan can be dissolved in acidic solutions. And in general chitosan based sorbents when functionalized with cross-linking agents improves the acid stability.

Badges
Science method

More Shivani Sharma's questions See All

How should I choose optimized pH value if the results for pH values ranging from 3-9 are same?

I have performed the optimization of pH ranging from 2-9 so that I can choose one pH value for subsequent experiments but the results pertaining to pH values from 3-9 are almost near.How do I...

02 March 2016 9,287 5 View

Can anyone explain what is actually compressive local stress in Raman spectra?

Attached file

01 February 2016 7,368 0 View

Adsorption of Pd(II) onto graphene oxide shows optimum pH at 6.0 but GO with quaternary ammonium salt shows optimum pH around 3-4. can anyone explain?

The adsorption of Pd(II) onto graphene oxide shows optimum pH at 6.0, whereas GO with quaternary ammonium salt shows optimum pH around 3-4. Attachment for graphene oxide on Pd(II)

31 December 2015 4,204 4 View

I have done silver nitrate test to remove bromine from my sample. EDX result is fine and not showing Br peak but in XPS I get Br . Why is it so?

The results are satisfied as per EDX as it is not giving Br peak. But XPS is showing 0.55% of Br....

11 December 2015 3,506 5 View

In raman spectra, after addition of metal ion to some graphitic material, will the intensity ratio of D to G bands increase or decrease?

What does the increased/decreased intensity of ID/IG imply?

11 December 2015 1,730 2 View

In interference studies to check the extraction of Pd(II), will the metal ions such as Hg(II) and Pt interfere along with Pd(II)? If yes/no. Why?

11 December 2015 1,416 1 View

Can anybody tell the formula for the % recovery of metal ions in adsorption process?

If i have found the concentration of the metal ion in the filterate . Now i want to check that how much % of the metal ion is recovered.

11 December 2015 8,862 3 View

In interference studies to check the extraction of Pd(II), will the metal ions such as Hg(II) and Pt interfere along with Pd(II)? If yes/no. Why?

In interference studies to check the extraction of Pd(II), will the metal ions such as Hg(II) and Pt interfere along with Pd(II)?

11 December 2015 947 1 View

Can Akaike's Information Criterion be used for both linear and non linear model?

AIC is a statistical methodology to compare the isotherm models

11 December 2015 6,376 6 View

Will H2PdCl4 and PdCl42- behave in a similar fashion for an adsorption study?

Actually I recovered palladium from a catalyst Pd/AC + 4HCl (aq) + H2O2 (aq) → H2PdCl4 (aq) + AC + 2H2O (i)l Now I wanted to know that whether as such I can use these palladium species for...

10 November 2014 3,961 3 View

Baseline drift in HPLC? What causes this?

Hello, Why do i see this baseline drift when i compare my blank (black) to the sample (blue)? Any suggestions as to why this happened? Thank you!

11 August 2024 3,770 4 View

How to calculate CCS for Sodiated adduct ions and Multiply Charged Ions?

I'm currently working on calculating the collision cross section (CCS) for various ions, and I'm facing challenges when dealing with sodiated and multiply charged ions. Most of the resources I’ve...

08 August 2024 8,329 0 View

Conjugation of PEG-Amine to an Amino Acid Using EDC?

I am attempting to conjugate PEG to an amino acid at the C-terminus, for the purposes of producing nanoparticles. I have been told that PEG modified with amine groups can be used for this purpose,...

31 July 2024 2,033 1 View

Inquiry on Maximum Nucleic Acid Volume for 2.5 mL Liposome Solution?

I am currently working on a project involving liposomes and need to determine the maximum volume of siRNA that can be added to a 2.5 mL liposome solution with a total lipid concentration of 10...

30 July 2024 6,420 1 View

Can the limit of quantification (LOQ) of an analytical method fall outside its linear dynamic range, or must it always be within it?

Can an analytical method's limit of quantification (LOQ) be outside its linear dynamic range, or is it always required to be within it? Please provide a thorough explanation supported by verified...

29 July 2024 7,198 9 View

Where to start the Analytical model for Dry sliding wear of metal surface ?

I am doing research on wear mechanism of the additive manufactured metal parts under dry condition. Please share the reference to start the analytical modelling of the wear prediction.

29 July 2024 6,115 0 View

Does anybody know why my chitosan/pva/gelatin hydrogel dissolve in PBS?

My final research is about making chitosan/pva hydrogel for wound healing using gelatin as crosslinker. Last month, i made the thin film hydrogel and it turn well. It was okay. Last week, i make...

28 July 2024 2,794 6 View

How can I use DFT-D3 correction ( Siesta version 5.0.1)?

Dear Siesta Users, I installed Siesta 5.0.1 and I want to use Grimme's D3 correction. According to the 5.0.1 manual, I could use a few parameters to include the D3 correction in the...

27 July 2024 5,748 0 View

EDC carbodiimide and NHS easter 's half life among different pH?

It has been long known that EDC carbodiimide and NHS easter's half life agains hydrolysis are highly related to pH. However, very surprisingly, not yet found a paper giving a table/chart of their...

25 July 2024 8,738 0 View

How to determine method detection limit in an analytical method?

I know the difference between instrumental LOD and method LOD but my query is - in case of any sample whose concentration is zero or not detected by the instrumental LOD, is it possible to get...

24 July 2024 6,592 5 View