How should I choose optimized pH value if the results for pH values ranging from 3-9 are same?

I have performed the optimization of pH ranging from 2-9 so that I can choose one pH value for subsequent experiments but the results pertaining to pH values from 3-9 are almost near.How do I...

02 March 2016 9,214 5 View

Can anyone explain what is actually compressive local stress in Raman spectra?

Attached file

01 February 2016 7,294 0 View

Adsorption of Pd(II) onto graphene oxide shows optimum pH at 6.0 but GO with quaternary ammonium salt shows optimum pH around 3-4. can anyone explain?

The adsorption of Pd(II) onto graphene oxide shows optimum pH at 6.0, whereas GO with quaternary ammonium salt shows optimum pH around 3-4. Attachment for graphene oxide on Pd(II)

31 December 2015 4,138 4 View

I have done silver nitrate test to remove bromine from my sample. EDX result is fine and not showing Br peak but in XPS I get Br . Why is it so?

11 December 2015 3,436 5 View

In raman spectra, after addition of metal ion to some graphitic material, will the intensity ratio of D to G bands increase or decrease?

What does the increased/decreased intensity of ID/IG imply?

11 December 2015 1,662 2 View

In interference studies to check the extraction of Pd(II), will the metal ions such as Hg(II) and Pt interfere along with Pd(II)? If yes/no. Why?

In interference studies to check the extraction of Pd(II), will the metal ions such as Hg(II) and Pt interfere along with Pd(II)? If yes/no. Why?

11 December 2015 1,342 1 View

Can Akaike's Information Criterion be used for both linear and non linear model?

11 December 2015 6,304 6 View

Can anybody tell the formula for the % recovery of metal ions in adsorption process?

If i have found the concentration of the metal ion in the filterate . Now i want to check that how much % of the metal ion is recovered.

11 December 2015 8,795 3 View

Will H2PdCl4 and PdCl42- behave in a similar fashion for an adsorption study?

10 November 2014 3,884 3 View

In X-ray diffraction (XRD), how can we relate crystallinity index, crystallite size and particle size?

06 July 2014 738 7 View

error in running a model in Abaqus

Excessive rotation of nodes in node set ErrNodeExcessRotation-Step1

17 August 2021 0 0 View

error in modelling model in Abaqus

Excessive rotation of nodes in node set ErrNodeExcessRotation-Step1

17 August 2021 0 0 View

MD MOE RMSD

How to calculate the RMSD values for a MD simulation using MOE?

07 August 2021 0 0 View

MD MOE RMSD

How to calculate the RMSD values for a MD simulation using MOE?

07 August 2021 0 0 View

MGL tools

20 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

How climate change will influences human and animal behavioral change?

The role of climate change influencing the human behavior as well as economics interest

01 June 2021 0 0 View