Which would be a good journal for submitting a review article on the computational modeling of Pain?

More Erick Arguello's questions See All

How to measure HRV-PRV agreement using Bland-Altman plots from Excel (step-by-step guide)?

Hi! I recently installed the Real Statistics complement for building Bland-Altman plots in Excel. However, I don't know how to use it in evaluating the agreement between HRV and PRV series. Could...

10 November 2019 2,151 3 View

What is the minimum number of PP intervals required for accurate and reliable extraction of Pulse Rate Variability (PRV) from PPG signals?

The minimum number of RR intervals required for reproduce several metrics derived from HRV (e.g., HF power) can be found in the literature (Richards et al., 2010). However, what about PPG signals...

05 June 2019 3,353 2 View

How to calculate PRV-high frequency (HF) power from PPG signals?

Where could I find a MATLAB code for estimating the PRV-high frequency (0.04 - 0.15 Hz) power from a PPG signal? Thanks in advance!

04 May 2019 4,090 3 View

False Positive or False Negative?

When the time deviation between the annotation of the expert and what is labeled by a peak detection algorithm exceeds the tolerance limits (see the picture), should we consider it as a False...

03 April 2018 10,236 4 View

One-way, Two-way or Multifactorial ANOVA?

I want to compare the runtime of two different algorithms for calculating the response obtained when a rectangular pulse is applied. The parameters are the pulse amplitude, the pulse duration and...

09 October 2017 904 1 View

Can we consider that environmental engineering and biomedical engineering can overlap?

Biomedical Engineering comprises many domains, such as tissue engineering, biosensors, clinical engineering and physiological modeling, but I was wondering if environmental engineering can be...

09 October 2017 3,420 4 View

How many runtime measures do i need to be statistically reliable?

I need to compare average runtime execution of two different C++ algorithms. The question is: how many times do I need to repeat the experiment in order to calculate the average runtime for each...

08 September 2016 7,547 12 View

Results from implementation of the Internet of Things: Does it really has an advantage for the industry?

This concept (the Internet of Things - IoT) has become increasingly popular. It is expected to offer promising solutions to transform the operation of existing industrial systems such as...

02 March 2016 7,912 11 View

Can anybody provide me with a C++/Matlab code for the "spike-response neuron model"?

Unlike the Integrate-and-Fire (IF) neuron model, the spike-response model (SRM) (Gerstner & Kistler, 2002) parameters depend on the time since last output spike and, while IF models are...

11 December 2015 6,934 0 View

Could anyone kindly provide me with a Matlab code for solving the XOR problem by using the differential evolution algorithm?

The Differential Evolution algorithm (Storn & Price, 1997) was tested by Plagianakos and Vrahatis (Proc. of the IEEE Int. Joint Conf. on Neural Networks - IJCNN’2000) for solving the XOR...

06 July 2015 918 6 View

How can I prepare virus for a TEM or SEM imaging?

I have virus (viral hemorrhagic septicemia virus) in suspension and the experiment will not involve cells. What level of TCID50 is preferred?

11 August 2024 3,115 1 View

Handling Missing Data and Building a Predictive Model with Incomplete Information ?

I am developing a predictive model for a water supply network that involves 20 influencing points. However, I only have historical data for 10 out of these 20 points. I would like to know how to...

10 August 2024 4,005 2 View

Is it possible to use the Fused Deposition Modeling (FDM) to additively manufacture interconnected porous structure generation of >100-200 micrometer?

Usually, additive manufacturing techniques like SEBM, SLS, and SLM are used for interconnected porous lattice structure generation with sizes of >100–200 micrometers. Can the Fused Deposition...

09 August 2024 7,892 0 View

How to define an anisotropic material with asymmetric elastic compliance/stiffness matrix in ANSYS APDL?

I need to model an anisotropic material in which the Poisson's ratio ν_12 ≠ ν_21 and so on. Therefore, the elastic compliance matrix wouldn't be a symmetric one. In ANSYS APDL, for TB,ANEL...

09 August 2024 5,048 2 View

How can I apply boundary conditions in an orthotropic steel deck numerical model using ABAQUS software?

I am trying to simulate vehicular loading on an orthotopic steel deck bridge section in ABAQUS software. The red arrow mark in the attached figure indicates the direction in which the vehicle will...

08 August 2024 719 0 View

Hello Everyone ! I'm looking for a good journal to publish my manuscript with low publication cost?

I am Looking for a Science Journal with good impact factor and low publication cost to publish a review paper. Your suggestions would be appreciated.

06 August 2024 6,796 3 View

Can you suggest reliable sources defining "3D mesh" and "3D city models"?

Dear fellow researchers, I am currently working on a paper where I need to provide a reliable reference that defines and distinguishes between 3D mesh models and 3D city models. Although I am...

06 August 2024 9,986 2 View

Please explain how the plastic input value should be considered from the true stress-strain curve for the bilinear elastoplastic material model ?

I am working on Abaqus/Explicit(Quasistatic ) for the deformation of the auxetic structure model. Please explain how the plastic input value should be considered from the true stress-strain curve...

05 August 2024 454 3 View

What are the shear and normal stiffness values of an LLDPE liner in 3D numerical modeling of a stockpile?

I am seeking experimental or applicable data for the liner (LLDPE) interface in FLAC3D numerical modeling of a large stockpile. Could you please recommend suitable references? The preferred data...

05 August 2024 3,665 0 View

How to report results of Generalised Linear Mixed Models in a journal article?

Hi everyone, If you have written or come across any papers where Generalised Linear Mixed Models are used to examine intervention (e.g., in mental health) efficacy, could you please share the...

04 August 2024 4,130 4 View

Rob Boell

Or the journal of the IASP - Pain - also published by Elsevier

Erick Arguello

Thank you Mark and Rob,

I had the same idea, but those journals are more focused on experimental (physiological, neurobiological) studies, and I point to computational modeling.

In addition, Review articles cannot be submitted without an invitation.

Any suggestions?