There are numerous techniques and methods for solar water desalination. Can anybody please figure out which one is the most efficient in terms of solar energy utilization and clean water production?
Dear Sir,
This recent article may help you.
https://onlinelibrary.wiley.com/doi/full/10.1002/ep.12657
Regards
Please find the links below. I believe that it helps... Thank you
https://www.sciencedirect.com/science/article/pii/S1364032116304919
https://www.sciencedirect.com/science/article/pii/S1364032117312960
https://www.sciencedirect.com/science/article/pii/S0011916418321258
Dear Muhammad Amjad,
I have attached link of research articles on most efficient methods for solar water desalination.
01. Article Solar Energy for Water Desalination
02. Article Nanophotonics-enabled solar membrane distillation for off-gr...
03. https://www.internationalwatersummit.com/__media/Energy-Efficient-Desalination-2018.pdf
04. https://www.omicsonline.org/open-access/water-desalination-using-solar-energy-humidification-and-dehumidification-principle-ier-1000121.php?aid=63370
05. http://pubs.acs.org/doi/full/10.1021/acsnano.7b08196?src=recsys
06. https://www.eurekalert.org/pub_releases/2018-05/s-htw051618.php
07. http://www.mdpi.com/2079-9276/4/2/227/pdf
08. https://www.elementalwatermakers.com/solution-gravity/
09. https://www.sciencedirect.com/book/9780128054116/solar-energy-desalination-technology
10. https://phys.org/news/2018-11-carbon-neutral-solution-desalination-geothermal.html
I hope I have answered your question.
With Best Wishes,
Samir G. Pandya
Poster Hotspots of Solar Potential in India
I have dataset which shows the length of power lines. I need to classify the lines based on the line length. Is there a rule to classify the High voltage (HV) and low voltage (LV) lines based on...
03 March 2021 4,116 4 View
Hi, I am using GROMACS 5.1.4 to simulate water in contact with a surface. I am only interested to calculate some properties of water near the surface. Let's say at a distance of x nm from the...
03 March 2021 9,989 2 View
Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...
01 March 2021 9,537 2 View
I am simulating Heat Exchanger. I have tried and tested all the methods to resolve this issue from the internet like refining mesh, improving skewness and orthogonal quality ,extending outlet to...
01 March 2021 6,985 3 View
I have to amplify a gene and my primers just reached. The Tm for Forward primer is 64.2, and that of reverse primer is 65.5. Can some one suggest how to get the best annealing temperature? Thanks...
01 March 2021 360 7 View
Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?
01 March 2021 9,785 3 View
I have a virtual machine. My host Pc specs are not that good thats why i went for virtual servers. so basically my host pc has 8gb of ram with nvidia quadro k2200 4Gb DDR5 GPU ,processor intel...
01 March 2021 8,415 1 View
Is the period to autoclave not enough? The inoculation in a hood and flame and UV and alcohol.
27 February 2021 9,356 3 View
hello. i am junior researcher. I received a comment from a reviewer that he could not find NMR data in my submitted paper. I had included the NMR graph with explanation and formula to calculate...
27 February 2021 734 4 View
I have a sample of treated water sample & asked to obtain ammonia conc. in sample using a machine with 5-25 ppm detection range. However, upon testing with different dilution factors, all...
27 February 2021 8,483 3 View
Hi, I am after the reference below, my library says it cannot obtain a copy either locally or internationally, any help appreciated! Chris Wang ZM, Heshka S, Wielopolski L, Pi-Sunyer FX, Pierson...
03 March 2021 6,193 1 View
Hi, Could you help me to get the latest (2019, 2020) solar resource data for a particular site in JAPAN? PV GIS and NSRDB data are not in reach to JAPAN, I'm looking for some other database for...
03 March 2021 961 3 View
Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...
02 March 2021 4,910 3 View
im working now on TPV solar cells and metamaterials and i realy need our help in CST microwave i have a tpv cell simulation and i want to extract particullarly the absorbtion of only the active...
02 March 2021 2,246 2 View
I am currently doing my third year design project. I have been assigned to design a glycerol recovery column in vinyl acetate monomer production. The process unit before the recovery column is an...
01 March 2021 9,525 4 View
I am thinking about working on solar furnace with heliostats that concentrate sunlight and heat molten salt, but currently no luck with research. Not a lot of papers based on the subject. (check...
01 March 2021 5,023 5 View
I am a little confuse with the mechanism of solid lipid nanoparticles (SLNs). The main point of encapsulating drugs into SLNs is because some drugs have low solubility in water. Therefore, SLNs...
01 March 2021 3,703 3 View
When explaining substitution models, the substitutions are expressed as Q matrix. Why is the sum of the elements in a row zero?
28 February 2021 3,864 3 View
I am designing a small grid connected solar PV power-plant. As the battery's capacity is specified in Ah and demand in kWh. What is the best way to size the battery bank? I have battery price in...
28 February 2021 1,638 3 View
I have a doubt on how to select the inductor and capacitor value when I want to implement MPPT controller. This is because we always take a maximum output voltage and current but in this case, we...
28 February 2021 3,637 2 View