I have effluent charged with cobalt and nickel and I need to simulate the liquid liquid extraction using software to know the effect of parameters such as O/A ratio, pH....
Many thanks
One software that can simulate solvent extraction process and measure the effect of parameters such as pH, O/A ratio, etc. is ChemCAD. This is a chemical process simulation software that provides detailed modeling of liquid-liquid extraction processes, including the design and optimization of solvent extraction systems. It allows users to model various parameters such as pH, O/A ratio, type of organic and aqueous phases, and other relevant process variables to simulate and optimize the extraction performance.
There are several software that can simulate solvent extraction process for separating cobalt from nickel. Some of them are:
- OLI Flowsheet: ESP: This is a software that can model various chemical processes, including solvent extraction, using thermodynamic and kinetic data. It can handle complex systems with multiple components, phases, and reactions. It can also optimize the process parameters, such as O/A ratio, pH, temperature, and solvent concentration, to achieve the desired separation efficiency1.
- Aspen Plus: This is a software that can simulate various chemical engineering processes, including solvent extraction, using physical property data and unit operation models. It can handle both steady-state and dynamic simulations, as well as sensitivity analysis and optimization. It can also model the effect of parameters, such as O/A ratio, pH, temperature, and solvent concentration, on the separation performance2.
- ProSim Plus: This is a software that can simulate various industrial processes, including solvent extraction, using thermodynamic and unit operation models. It can handle multi-component and multi-phase systems, as well as equilibrium and rate-based calculations. It can also optimize the process parameters, such as O/A ratio, pH, temperature, and solvent concentration, to achieve the desired separation quality3.
These are some of the software that can simulate solvent extraction process for separating cobalt from nickel. You may want to try them or compare them according to your needs and preferences.
https://www.olisystems.com/resources/spotlight-videos/enhancing-solvent-extraction-efficiency-in-nickel-cobalt-and-rare-earth-element-production-modeling-mass-chemistry-and-heat-balance-with-oli-software/
Article Process development for the direct solvent extraction of nic...
https://pubs.aip.org/aip/acp/article/1805/1/030003/782214/Solvent-extraction-separation-of-nickel-and-cobalt
https://pubs.rsc.org/en/content/articlelanding/2013/cp/c3cp50819f
I have searched the web for some more software that can do this task. Here are some of the results that I found:
- METSIM: This is a software that can simulate various metallurgical and chemical engineering processes, including solvent extraction, using mass and energy balance equations and process models. It can handle complex systems with multiple components, phases, and reactions. It can also optimize the process parameters, such as O/A ratio, pH, temperature, and solvent concentration, to achieve the desired separation efficiency1.
- SysCAD: This is a software that can simulate various mineral processing and chemical engineering processes, including solvent extraction, using thermodynamic and kinetic data and unit operation models. It can handle both steady-state and dynamic simulations, as well as sensitivity analysis and optimization. It can also model the effect of parameters, such as O/A ratio, pH, temperature, and solvent concentration, on the separation performance2.
- HSC Sim: This is a software that can simulate various chemical and metallurgical processes, including solvent extraction, using thermodynamic and unit operation models. It can handle multi-component and multi-phase systems, as well as equilibrium and rate-based calculations. It can also optimize the process parameters, such as O/A ratio, pH, temperature, and solvent concentration, to achieve the desired separation quality3.
These are some of the other software that can simulate solvent extraction process for separating cobalt from nickel. You may want to try them or compare them according to your needs and preferences. 😊
For the overall answers about this question, you can refer to these references:
- OLI Flowsheet: ESP by OLI Systems
- [Aspen Plus] by Aspen Technology
- [ProSim Plus] by ProSim
- [METSIM] by Metallurgical Software
- [SysCAD] by SysCAD
- [HSC Sim] by Outotec
https://www.olisystems.com/resources/spotlight-videos/enhancing-solvent-extraction-efficiency-in-nickel-cobalt-and-rare-earth-element-production-modeling-mass-chemistry-and-heat-balance-with-oli-software/
Article Process development for the direct solvent extraction of nic...
Chapter Modelling Synergistic Solvent Extraction of Nickel and Cobal...
https://www.academia.edu/94325762/Modelling_Synergistic_Solvent_Extraction_of_Nickel_and_Cobalt
Good luck
- Badges
- Science topic
- Similar topics
- Analytical Chemistry
- Extraction