Nowadays, with great advances in technology I would like to know which type of equipment are used in compound analysis of materials besides XRF and XRD?
How to find or calculate the coefficient of friction in samples during wear test..?
31 December 2018 2,695 1 View
what is the purpose of DAS measurement in microstructure analysis...? how can do in SEM image..?
09 October 2018 10,270 0 View
I have acquire EDS Analysis on the SEM. many peaks with reference to its constituents very near by locations due to scale X scale. suggest me some useful link, or EDS peak creation software...
07 August 2018 2,089 2 View
Is it worth to published PhD works in ESCI journals?
02 March 2018 5,574 16 View
I tried full-prof, but I do not know where I should start. How can I use full-prof? Is there any manual available to learn ?
31 December 2017 8,122 2 View
To be more clear. Two spectra came from the same powder (in the sense of Chemical pattern) with different shape (one was a nano cubes structures) of particles. How i can explain difference in the...
31 December 2017 6,691 0 View
A widely accepted way to estimate the dislocation density is X-Ray diffraction but which plane do I consider for estimating the dislocation density in the material. Similarly for TEM and EBSD...
31 December 2017 8,568 0 View
I want to know the ways to improve the accuracy.
31 December 2017 3,821 1 View
i need to check the plagiarism percentage in my Research papers, which software is best to check though online .? kindly suggest me
08 September 2017 4,585 0 View
I want to publish my Design and Analysis review paper in any reputed journal, but the time duration is less. Are there any free journals available to publish with in 2 months? Otherwise can you...
09 October 2016 6,348 3 View
I am using Rhodamine6G as gain medium and silver nanoparticles as scatterers on a microscope slide and laser input 532 nm comes from above.
09 August 2024 9,894 2 View
Require for Rietveld refinement in XRD.
08 August 2024 3,081 2 View
During low-temperature testing, new diffraction peaks that appear could be indicative of several phenomena. In one of our tests, we observed notable new peaks around 40° and 45° in a specific...
06 August 2024 726 3 View
After immunohistochemistry of previously fixed in PFA and EtOH and then frozen 20 μm sections of zebrafish brain, DAPI staining is very weak (right) compared to the same sections stained without...
05 August 2024 9,637 2 View
I want to refine one XRD peak of my in-situ xrd but the background is never working good which ultimately fails the refinement. How to refine and adjust the background using GSAS-II
05 August 2024 5,291 2 View
Are there any fluorescently labeled anti-Alpaca secondary antibodies raised in Donkey? So far I have only been able to find anti-Alpaca secondaries raised in Goat. Or is this not possible due to...
04 August 2024 4,255 1 View
Citi BLOC Standard Basket Definitions: A standardized unit representing a fixed basket of construction materials, labor, and equipment costs priced in various cities. Purpose: To create a common...
04 August 2024 8,997 1 View
Hello. I am working on ROS production of two systems: system A is cerium oxide and hydrogen peroxide, system B is cerium oxide nanoparticle, hydrogen peroxide and potassium bromide. I did some...
04 August 2024 5,974 3 View
How to calculate the molar proportions of the oxides from the XRF analyses?
02 August 2024 2,565 2 View
I fabricated Ti3C2Tx using concentrated HF 40%, I plot an XRD as attached image below.. please let to know if I obtained it or not.
02 August 2024 6,789 4 View