Sample dilution for quantitative analysis using ELISA?

If the detection range is in ng/ml but the reference range is in ug/ml for a molecule or protein in serum or plasma .how to dilute and what is the initial volume to be taken for quantitative analysis

02 March 2021 7,670 3 View

Please. Could you help be in implementing Fractal Discrete Cosine Transform algorithm in Matlab?

I do need the Matlab code of Fractal Discrete Cosine Transform (FDCT). Can anyone who has already implement this code, help me with the implementation of this transform?

24 February 2021 5,602 2 View

What is the reason film thickness increased?

what is the reason film thickness increased when increased doping concentrations give some reasons The measured film thickness is 156, 282, 394, 548 and 681 nm for 0, 1.5, 2.5, 3.5, and 4.5 wt....

17 February 2021 8,987 5 View

Queries regarding the rain flow counting algorithm?

02 February 2021 9,790 2 View

How to determine the genetic potential of the genotype in terms of fruit size and weight?

In addition to genetic and environmental factors, fruit size is also influenced by crop load, rootstock, orchard planting system/tree training system, pollination, water and nutrient management,...

13 January 2021 9,309 4 View

Is it possible to ligate two restriction ends those have no complementary bases?

In my lab,we are trying to construct a control plasmid. So we have to remove the insert gene which has two restriction ends:one is XhoI and other one is Hind III.So after double digestion we want...

01 January 2021 3,271 4 View

Is it machine learning models that have replicability capability?

We are doing the prediction of soil nutrients using spectral information by applying machine learning models. More than 300 soil samples were used from one district for analysis. We got the...

21 December 2020 9,663 3 View

How can I analyse and compare crop yield under different irrigation methods?

I have to compare yield parameters of a tree crop grown under three irrigation methods. But these systems are already established separately in three adjacent fields. Since I can not follow a RCBD...

21 December 2020 3,065 5 View

Why am I not getting intensity peaks at certain places while measuring using XRD on a metal additive manufactured part?

I am trying to capture the XRD intensity peaks for a part made up of nickel alloy. When I try to capture the peaks, I am unable to get them. Can someone help me out why is this phenomenon...

08 December 2020 995 14 View

split-split-split design will works in reality . if works please insists methodology to adopt?

I have four factors(F1, F2, F3, F4) with different levels( 3*2*2*3). Factors are nested each other so I am planning to do split -split-split design. please insist on the methodology for the triple...

01 December 2020 4,762 6 View

Why are the velocities so high in my Boussinesq approximation Fluent simulation?

Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...

02 March 2021 4,910 3 View

Is There Any Feasible Method To Test Fluorescent Compounds Other Than Fluorescence Spectrometers ??

Is There Any Feasible Method To Test The Efficiency Of Fluorescent Compounds Other Than UV Spectrometers ? Suggestions Would Be Appreciated !

02 March 2021 5,785 3 View

How to show arrows over the streamlines in CFD-post?

I follow this to make streamlines like the photos attached below: (software- CFD post-processing) First I plot the 2D streamline over a surface "streamline 1". them I plot a vector by the...

01 March 2021 8,668 3 View

What is recommended for solid domain in ANSYS FLUENT?

Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?

01 March 2021 9,785 3 View

Can Virtual Servers (remote dekstop manager) run heavy ANSYS Fluent CFD simulation ?

I have a virtual machine. My host Pc specs are not that good thats why i went for virtual servers. so basically my host pc has 8gb of ram with nvidia quadro k2200 4Gb DDR5 GPU ,processor intel...

01 March 2021 8,415 1 View

How to increase mesh quality of a cfd model in ansys fluent?

How can one improve mesh skewness, orthogonality, aspect ratio?

28 February 2021 7,730 3 View

How do you mesh a thin solid in Fluent?

Hello, I have used the shell function on SpaceClaim to create thin solids for the model I am studying. These are contained within an enclosure for my study. I chose this approach as it avoids the...

24 February 2021 8,856 3 View

How to extract the y+ value from fluent ?

I am doing a 3D steady simulation of a wind rotor using Ansys Fluent. In order to have a y+ of 1, I created 10 inflation layers using total layer thickness method, and I started a first...

23 February 2021 2,819 3 View

Help with assigning pressure boundary conditions in FLUENT on a large structure?

Hello, I created a very tall tower (>1000m) and applied pressure boundary conditions at the inlet (bottom) and outlet (top) that correspond to the pressure are their relative altitudes....

22 February 2021 9,972 4 View

How do I add a udf to Ansys fluent and does it need to be compiled before hand ?

I have a Define_CG_Motion udf written in c where do I add it to my Ansys fluent project and does it need to be compiled before that?

21 February 2021 9,347 3 View