Which is the best combination with Graphene/Graphene oxide/Reduced Graphene Oxide with 2D materials for supercapacitor application?

More Rahul Kapadia's questions See All

How to interpret multiple bell shaped curves in Kratky plot?

Hi, I'm trying to analyze a Kratky plot generated from my SAXS data. I am seeing multiple bell-shaped curves in my Kratky plot and I am not able to find any source to get relevant info on this...

20 January 2021 2,474 1 View

Lift off problem with Indium/Gold deposition?

Hi, I'm doing 5/40nm In/Au e-beam evaporation at rates 0.2A/s(for In),1A/s(Au) on lithographically(doubly coated 495k,950k PMMA e-beam resist) done Si substrate at base pressure 2e-6torr. I'm...

18 January 2021 7,550 4 View

How to Import .inp file from abaqus CAE to Ansys perfectly?

I am trying to import an Abaqus .inp file to Ansys but it does not import the whole assembly but only imports a single part. How to solve this.

17 January 2021 5,450 3 View

Can I know the reason for these non specific bands?

a PCR and gel electrophoresis was carried out to obtain the results. they are negative jak2 v617f samples (ref genome - NG_009904 )

13 January 2021 7,658 4 View

Which third party CFD Codes can be used for FSI Co-Simulation in Abaqus ?

Since Abaqus CFD is no longer available in newer versions what are other available codes for Fluid-Structure Interaction Simulation

11 January 2021 2,012 3 View

How to determine Viscoelastic and Hyper Elastic Material Properties for Abaqus by mechanical testing ?

I am studying about Impact load resistance property of Polyurea (Elastomer). With respect to this, I need to conduct tests on this material to evaluate its material model behavior as a...

29 December 2020 2,969 1 View

How to remove rotation along z-axis and shift the origin to body's center?

I have attached the files with this post to explain me how to remove rotation and center the origin at the body's local coordinate. This is just one sample and I have 1000s of files like this. I...

18 December 2020 3,838 3 View

Reason for growth of fungus/mould in hydrothermal liquifaction filtered product of cellulose-based materials?

Performed hydrothermal liquefaction of cellulose powder, at about 200 degrees for 10 16 hours. After simple filtration, I stored filtered product at room temperature for 4-6 days, there is the...

03 December 2020 7,327 3 View

Is Coefficient of Variability (CV) positively correlated with root mean squared error (RMSE) in every case??

My data for fungicide treated replication shows higher RMSE and R-square but less CV compared to the untreated replication for a regression between vegetation indices and yield. How correct is it?...

23 November 2020 2,079 6 View

Fuel Cell not working after charging?

I am making an electric fuel-cell car using platinum as an electrode and sodium hydroxide as an electrolyte. I tried both series and parallel connection to charging it, Even after charging 2...

17 November 2020 2,860 9 View

flexibility of polymers chain

effect of double bond on the flexibility of polymers

07 April 2021 0 0 View

Formulation of polymer color flakes

I am writing to request some information for making polymer color flakes. I would appreciate the help.

17 March 2021 0 0 View

What is the production process of CaFe ferroalloys?

I looking for ferro calcium production process

03 March 2021 1,755 4 View

12% ledeburitic cold work tool steel, etched for revealing retained austenite, any help for clarifying?

Hello everyone. Given microstructure image belongs to a 12% ledeburitic cold work tool steel (annealed and tempered). The sample was etched with picral (100 mL ethanol and 4 g picric acid). I...

02 March 2021 4,119 3 View

How Can I bring as much common elements in steel as possible to calculate stable phase(s) in OpenCalphad?

As I was tweaking step-by-step OpenCalphad6 Macros step1.ocm involving phase and thermal property calculation of a High-speed steel, I could not incorporate more than 6 elements in the steel...

01 March 2021 8,840 1 View

How can you bring two structures together to create an adhesive bond in LAMMPS?

I have created an Ice 1h crystalline structure and an Aluminium substrate structure and equilibrated both at 250K. Now I need to bring them together in a way that an adhesive bond is created....

01 March 2021 3,325 2 View

What are the new 2D nanomaterials were used for Silver nanoparticles stabilization?

In the stabilization of AgNPs are vital in current research interest. However, some of the 2D nano-materials like graphene oxide, MoS2, etc... previously used to stabilize it. But still they shown...

01 March 2021 2,207 3 View

What is the density for pva electrospining?

I'm Juan Carlos, a high school student who is working with electropinning, I made an electropinning machine with a 21g needle and a 30kv high voltage source and the distance between my needle is...

28 February 2021 298 3 View

1 nm thick MgO thin-film to be deposited on Si wafer using thermal evaporation. What will be the optimum deposition conditions?

Favourable conditions of base pressure, rate of deposition. Also, by which characterisation technique to be used to verify the thickness of the deposited film.

28 February 2021 3,640 3 View

Is anyone familiar with the cyclic compressive fatigue testing (BS EN 12697 - 25) ?

I would like to get more information on the cyclic compressive fatigue testing (BS EN 12697 - 25) which is typically done for bituminous material in pavement design. Any one can advise on the...

28 February 2021 2,004 3 View

Suman Basak

The reduction in lattice spacing from 0.85 to 0.36 nm in Reduced Graphene Oxide (rGO) is better capacitor.

Thanks

Rahul Kapadia

Dear Mr. Suman Basak,

Thanks for your answer. However, could you please tell me what is best 2D materials to composite with Graphene oxide to gain maximum energy density?

Xuefeng Zou

Reduced graphene oxide，but the reducation degree will obviously affect the performance of your fabricated composites.