I Synthesized graphene oxide and plane to functionalized RGO as RGO-N and RGO-S . Depending on experience, which is better as adsorbent for removal methlylene blue dye from aqueous solution?
Strong interaction could be occur between thiol functionalized systems and MB.
Thank you Dr.Nizam
What are the effects of climate change on poverty
10 November 2017 3,079 25 View
09 October 2017 5,840 28 View
Some articles are published in high quality journals in spite of having no enough sobriety
09 October 2017 7,549 30 View
08 September 2017 2,546 9 View
07 August 2017 5,186 23 View
03 April 2017 3,365 12 View
31 December 2016 345 5 View
I synthesized reduced graphene oxide via green reduction. Generally, it show more solubility in distilled water than ethanol ...why?
11 December 2016 7,842 0 View
11 December 2016 8,522 3 View
Is DCFDA appropriate for measuring total ROS production, or can it only detect certain types of ROS? If I want to measure total ROS production, which dye should I use?
01 March 2021 9,447 3 View
In the stabilization of AgNPs are vital in current research interest. However, some of the 2D nano-materials like graphene oxide, MoS2, etc... previously used to stabilize it. But still they shown...
01 March 2021 2,207 3 View
Favourable conditions of base pressure, rate of deposition. Also, by which characterisation technique to be used to verify the thickness of the deposited film.
28 February 2021 3,640 3 View
Is Hoechst toxic to cells? In general, it is known as non-toxic. I am working with dsRED MDA-MB-231 cell line. I applied it for my PDMS-based microfluidic platform, for this reason, I incubated...
26 February 2021 9,119 3 View
I am trying to reduce graphene oxide by thermally but I have no proper information regarding this. Can any one help me regarding the details about temperature and time for the reduction of...
23 February 2021 4,155 4 View
I notice that upon washing and air-drying of my RGO/SPCE surface and characterizing again via DPV, the current response towards ferricyanide probe significantly decreases. My worry is that the...
22 February 2021 5,324 3 View
I want to measure the thickness of aluminum oxide and titanium oxide layers deposited on textured glass substates. The layer thicknesses are typically below 100nm.
21 February 2021 5,465 4 View
I have used Picral etchant (4.2 g Picric acid, 10 mL Acetic acid, 70 mL Ethanol, 10 mL distilled water) but it didn't work. Is there any alternative?
21 February 2021 2,558 5 View
Hello, I'm working on removal of methylene blue. 01. in the dark test very first reading is taken 15 minutes after adding adsorbent to the dye solution and that UV absorbance reading is very...
19 February 2021 472 5 View
Hi there, my lab recently opted to use LavaLAMP from Lucigen instead of the Warmstart kit from NEB. However, Lucigen has yet to create a colormetric kit for RT-LAMP, and adding phenol-Red (pH...
17 February 2021 5,399 1 View