Which agent gives better results in Fe electrodeposition?

Thangaraj Natarajan @Thangaraj-Natarajan

30 January 2013 1 4K Report

A lot of additives are used to increase electrodeposition like sacrin, NaBr, Ammonium Cl and Sodium Cl and boric acid. Which one is the best?

João Azevedo

Hello Raj,

In my experience, from the ones you stated, boric acid is a good additive. If you like, please read the following on Fe electrodeposition (both papers) and boric acid additive (doi:10.1088/2053-1591/1/1/015028).

You can find the full texts in my profile.

Hope this helped.

Cheers,

Article Influence of the Rest Pulse Duration in Pulsed Electrodeposi...

Badges
Science topic

More Thangaraj Natarajan's questions See All

Sample preparation for characterizing hydroxyapatite nanoparticles?

Hello all! I have synthesized hydroxyapatite nanoparticles and have to characterize them with DLS and SEM analyses. Can someone please let me know the sample preparation methodology for DLS and...

06 April 2024 7,614 5 View

How can we understand the effect of semiconductor nature on ferroelectric material?

What could be the effect of semiconductor nature on ferroelectric material in the measurements like Dielectric and P-E loop. Because I have a ferroelectric material with dielectric constant and...

04 April 2024 9,918 0 View

Where Can I find SHG measurement in India?

01 April 2024 4,402 0 View

How to post my article in research gate?

I published mu article in IJSR. I want to publish the same article in Research Gate. What is the procedure?

17 December 2023 4,630 1 View

If there are three molecules in the asymmetric unit of a crystal, then which among the three has to be chosen for docking ?

The molecule is a copper complex and there are 3 such molecules in the CIF file

14 December 2023 4,999 2 View

How to Collaborate and undertake an academic Conference?

Our university is looking for collaboration in organising conferences with other universities. What is the best approach and how to ensure that the articles are published in Web Of Science or Scopus?

01 November 2023 3,926 0 View

Why catalytic pyrolysis has lower surface area, pore size and pore volume than non-catalytic pyrolysis?

I prepared carbon materials from biomass waste. I studied preparation of carbon materials from biomass using a catalyst and without a catalyst in pyrolysis process. Catalytic pyrolysis leads to...

24 September 2023 6,878 3 View

I am interested in doing a project on landslide detetion using Sentinel 2 data. I wish to know as how to go about acquring and processing the data ?

The Kodagu landslides occured during rain and so optical data is not useful due to clouds. I wish to use Sentinel-2 data. I am new to handling Sentinel-2 data . So I need to understand how to...

31 July 2023 3,329 2 View

Plastic Vials deformation during autoclaving ?

Dear Experts, Would like to have clarify about the curious topic. While doing autoclave of plastic vials (plastic containers) the vials undergone deformation and the shape of container is...

03 July 2023 1,650 0 View

How can we calculate heat input in Co2 Laser welding in continious mode where power 2KW Traverse speed is 25 mm/s Time taken 15 seconds ?

How can we calculate heat input in Co2 Laser welding in continuous mode where power 2KW Traverse speed is 25 mm/s Time taken 15 seconds?

15 June 2023 4,909 0 View

How to select target material for X-Ray generation?

Generally, the target material is Mo, Co, Cu, Fe, Cr, etc, so on what basis should we choose this material?

31 July 2024 5,824 0 View

What is the solubility of Iron (+3) in Bismuth Oxide?

Dear all: I am modifying Bismuth Tungstate with Hematite (Fe2O3), so I would like to know about how much Iron(+3) can form a solid solution in a Bismuth Oxide matrix. Best wishes Marco

29 July 2024 2,163 1 View

Is it true that there is a physico-statistical meaning to the constant π other than circular geometry but the iron guardians of the SE deny it?

We assume that there is a physico-statistical meaning to the constant π other than circular geometry, but the iron guardians of the Schrödinger equation deny this. The iron guardians of the...

22 July 2024 4,285 9 View

What does an additional peak in FTIR between 3100 and 3300 nm affect the quality of the material, benzethonium chloride USP??

I do not know much about FTIR! The material Benzethonium Chloride USP was compared to a reference standard in regards to FTIR, as per the USP testing: Identification B. Infrared absorption (FTIR),...

16 July 2024 6,918 7 View

What are the possible chelating agents to form complex with cobalt only but not nickel in the solution of nickel and cobalt sulfate?

I want to electrodeposit cobalt only leaving behind the nickel in the solution

15 July 2024 3,462 2 View

Asked a separate ways?

Dear all, I have a question regarding ways to separate ammonium nitrate and phosphorus pentoxide？

12 July 2024 3,164 2 View

Does the potentiostat have to be in a fume hood when polymerising the PANI?

I will polymerise Aniline on ITO glass WE, using 1M of H2SO4 and a potentiostat. However, I am not sure if I have to do the electrochemical polymerisation inside a hood. Is it necessary? Is the...

10 July 2024 2,937 3 View

I want to ask why the poly aniline film does not stick to the ITO type substrate knowing that I used the electrodeposition method?

In order to make a polyaniline film, I used the electrodeposition method and set all the conditions, but I noticed that the polymerization process is happening, but it doesn't stick to the...

09 July 2024 2,708 2 View

Surface adsorption with the help of iron and UV/H2O2 is innovative?

1.The topic I am going to research is "Advanced Gray Wastewater Treatment Output from the Biological Process by Iron-assisted surface adsorption and UV/H2O2". I think this method has been used a...

08 July 2024 9,464 1 View

What can be done when electronic minimization does not converge during geometry optimization in CASTEP?

Hello All, I've been facing difficulty in executing geometry optimization of a sodium polyanionic phosphate (Na4Fe3P4O15) crystal in CASTEP (please find the input and output files attached). When...

07 July 2024 8,626 2 View