Why peak current of oxidation or reduction of analyte decreases in MOF modified electrodes compared to bare?

I am working on Metal Organic Frameworks for electrochemical sensing of organic pollutants. For this, I am preparing MOF solution (1mg/ml ethanol) and dropcast on GCE, air dry then drop cast...

27 February 2020 525 4 View

Which counter ion (among acetate or formate) is recommended to replace TFA after peptide synethsis?

Hi, Can anyne suggest which is best counter ion (acetate/formate) to replace TFA after peptide synthesis when one has to work on cells and toxicity of TFA is a concern?

13 August 2019 3,268 7 View

How to do electrochemical surface characterization, i.e. how the size of particles will change the redox potential?

I have to do morphology characterization of the modified working electrode. At present, I only have CV instrument with me. Can anyone help if I can do electrochemical surface characterization,...

24 June 2018 3,005 4 View

What is the possible reaction mechanism of attraction of gold and silver at the time of formation of AgAu alloy NPs ?

How gold and silver Alloy alloy NPs will form. i want to know the molecular reaction mechanism ?

05 November 2017 8,618 3 View

How to make 2.0mM solution of polymer (such as PVF)?

Hi, I am trying to make 1000 mL of 2mM PVF solution. Can anyone suggest do I have to consider the mol wt of VF for determining the wight of PVF to be used.

31 October 2017 1,697 3 View

How to calculate thickness of the polymeric film using CV?

Hi, I have polymer film modified Pt electrode. How can I calculate the thickness of this polymeric film using CV? Thanks in adavance

29 October 2017 8,703 2 View

Does any body has antibody for CPR or CYP genes from Artemisia annua?

I need to perform a western for Artemisia annua genes CYP and CPR. Does anybody has antibody? If anybody has antibody for even one of these genes, could you pl. provide a small aliquot?

10 July 2016 7,881 1 View

What should be ideal potting mixture suiting to dynamic requirements of horticultural crops during pre-evaluation stage ?

08 July 2016 3,214 80 View

Can anyone suggest me the research topic on leadership for Master program?

21 May 2016 1,371 50 View

Why would all prefer to use female athymic mice for invivo studies related to non-small cell lung cancer?

I have seen in most of the research articles that female nude (athymic) mice has been used mostly for invivo studies related to non small cell lung cancer. I have a question that why they used...

21 September 2014 4,907 5 View

What's the best way to measure growth rates in House sparrow chicks from day 2 to day 10?

What's the best way to measure growth rates in House sparrow chicks from day 2 to day 10? Since, the growth curve from day 2 to 10 won't be like the "Logistic curve" it might not follow logistic...

03 March 2021 1,401 3 View

After a reference from Int J Body Compos Res, can any body help?

Hi, I am after the reference below, my library says it cannot obtain a copy either locally or internationally, any help appreciated! Chris Wang ZM, Heshka S, Wielopolski L, Pi-Sunyer FX, Pierson...

03 March 2021 6,193 1 View

What techniques can I use to determine the miscibility of polymer blends?

The term miscibility refers to the single-phase state in thermodynamics. I do not mean the compatibility of different components. To determine the miscibility I know several techniques such as...

03 March 2021 4,107 4 View

How to repeat an operation on an atom selection for multiple times in PyMol?

Hi, I am trying to construct a multi-layer fibril structure from a single layer in PyMol by translating the layer along the fibril axis. For now, I am able to use the Translate command in PyMol...

02 March 2021 4,569 4 View

Shall I skip the measurement model in SmartPLS?

Hello everyone, I had run a mediation model in SmartPLS using questionnaires that were already validated among my statistical population. A professor who edited my paper -though she is not...

01 March 2021 3,052 3 View

What is involved in morphological changes of SEM images of a substance?

In the sem analysis of CaCO3 nanaoparticles, the morphology images showed spherical shaped particles but the proposed morphology for these type of nanoparticles is trigonal. I prepared the...

01 March 2021 1,960 4 View

Joint behaviour in Abaqus is not captured well?

I am working on roof joint and trying to simulate the behaviour in Abaqus. I am successful in running the model but the final graph does not follow the experimental curve in the negative direction...

01 March 2021 6,661 3 View

What is the most reliable source to get Impact factor of journals?

Source to get Impact factor of journals

01 March 2021 6,654 2 View

How to define tie constraint between rigid body and another part in dynamic explicit model of Abaqus?

Hi dear researchers I connected a rigid body into the part of my structure by tie constraint and then I added displacement to rigid body, in static general step every thing is fine and these two...

28 February 2021 3,442 2 View

Does the circuit modeling for planar monopole antennas using Foster canonical forms give good approximation?

Hi researchers, I am searching for some accurate way to do the circuit modeling of planar CPW-fed monopole antennas. I have gone through the literature where mostly circuit modeling is done using...

28 February 2021 7,016 1 View