I wanted to use active shape model to find wall thickness of heart walls.
For that, I wanted the training data of ultrasound images with HCM.
Please provide me any links if you have any idea.
Dear Gunjan
have you checked physionet?
it is the most famous and reference data base for such data you may find some yhing useful there
regards
You can find ultrasound databases from this website.
http://radiopaedia.org/search?utf8=%E2%9C%93&q=ultrasound&scope=all
You can try following links related to cardio...
http://www.bsecho.org/education.
http://physionet.org/physiobank/database/
http://pie.med.utoronto.ca/TEE/index.html
http://cardiologyimages.com/
https://e-echocardiography.com/index.php
https://mega.co.nz/#!QpFAgDyK!lZ9hh8x8IXrEFZkRc98rFSwWr5konBgrEvghBDcUDEs
I am running a coarse DNS case for pipe flow with 2.1 Million cells. My residuals are quite fluctuating as its a fully turbulent annular pipe flow case but its getting statistically converged to a...
29 May 2024 2,063 5 View
I am trying to run a turbulent pipe flow simulation with turbulent Reynolds number of 600, for 15 seconds, the flow is pressure driven due to gravity enforced buoyancy force which gives kinematic...
20 May 2024 5,619 3 View
In most common turbulence model studies, when considering Reynolds stresses the components of auto-correlation, , , and components of cross-correlation are considered. In the research studies...
02 May 2024 2,776 2 View
I am planning to work on different water bodies of Andhra Pradesh. So I want to purchase a portable water testing kit with multiple parameters. Please suggest me a few best option, which would be...
17 April 2024 7,210 3 View
I am working on WMLES (wall Modelled LES) for which if I calculate my wall shear stress analytically and want to enforce it as a boundary condition at the wall patch, so that I do not need to...
15 April 2024 9,059 3 View
Is there any specific relation between Re_b (bulk/ Mean Reynolds number) and Re_\tau (friction Reynolds Number). In few of the literature and experimental work I have gone through researchers give...
01 April 2024 861 5 View
This is a code block from nutWallFunction library in OpenFOAM where in, effective kinematic viscosity ($\nut_w$) at the wall is calculated using resolved field(in case of LES)/ mean field(in case...
04 March 2024 9,548 2 View
When Prandtl number is increased for two cases tested over same Rayleigh number, the peak vertical-velocity decreases as Prandtl is increased. This is questionable to the fact that in general...
11 February 2024 4,196 2 View
I have a fully developed pipe flow in with Inner radius (r) and outer radius (R), using pressure driven flow condition due to buoyancy, - (1/rho) dP/dx = g and velocity scaling u* = sqrt ( (-R/...
09 February 2024 3,727 3 View
I wanted to convert few 2D compounds to 3D using Avogadro and then use them for docking. Are these ligands efficient for docking? Will I get accurate results. Thank you in advance.
29 January 2024 9,737 2 View
I would like to learn more about SPSS and Its application especially in regards to data analysis. Please suggest me how I can learn more about it. Thank you so much.
11 August 2024 9,101 4 View
I have reverse sequences (AB1 format), can I base on reverse DNA sequences to perform nucleotide alignment, convert nucleotides to amino acids and deposit the sequence in GenBank database?
11 August 2024 5,138 1 View
Hello, Why do i see this baseline drift when i compare my blank (black) to the sample (blue)? Any suggestions as to why this happened? Thank you!
11 August 2024 3,770 4 View
Willett, Shenoy et al. (2021) have developed a brain computer interface (BCI) that used neural signal collected from the hand area of the motor cortex (area M1) of a paralyzed patient. The...
10 August 2024 7,180 0 View
I'm currently exploring the application of Python in textile engineering, specifically in areas like data analysis, process automation, and the development of smart textiles. I'm interested in...
10 August 2024 7,429 2 View
How can I use the cif data obtained from rietveld refinement extracted via gsas2, for microstructural analysis using ETEX software?
09 August 2024 7,718 0 View
Let's say we have a standard, regular hexagonal honeycomb with a 3-arm primitive unit cell (something like the figure attached; the figure is only representative and not drawn to scale). The...
07 August 2024 1,937 1 View
A fungal strain was treated with nanoparticles. We want to do an environmental SEM analysis. So could anyone share your views on preparing the sample? Thank you.
07 August 2024 5,307 1 View
Hi, I have a question about normalizing the MTT OD values for doing the statistical analysis. So, if we have 3 different plates and we call them 3 different replicates, so, first we would...
07 August 2024 8,106 4 View
Hi! So i attempted to understand a novel protein behavior towards heat application by analyzing its secondary structure change. I subjected the protein to a thermal denaturation analysis using...
06 August 2024 1,989 3 View