When evaluating a system, do I need to build or simply simulate?

Ajayi Olusola Olajide @Ajayi_Olusola_Olajide3

06 June 2017 1 4K Report

I have a system at hand to evaluate/assess with real data at my disposal. I decided to implement/build in order to 'test' the 'potent' of the system and the results generated. Could this be referred to IMPLEMENTATION or what I did is SIMULATION?

Is simulation a better term and posit that implementation in this case?

S.K. Lakshmanaprabu

If u have real time system, generate data and develop a model using data. Finally compare your data driven model with your real time system to evaluate your generated model.

if you have real time simulator in your university then use MIL, HIL testing for validating your model.

Badges
Science topic

More Ajayi Olusola Olajide's questions See All

When evaluating a system, do I need to build or simply simulate?

When evaluating a system, do I need to build or simply simulate? EditI have a system at hand to evaluate/assess with real data at my disposal. I decided to implement/build in order to 'test' the...

05 June 2017 7,296 1 View

In Genetic Fuzzy (using MATLAB), how best are data captured & evaluated?

In evaluating a system using Genetic Fuzzy Evolutionary Computation (using MATLAB), how are data captured - from Fuzzy or from Genetic Algo? May be to make it clearly - importing data from excel...

05 June 2017 7,439 2 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

16 June 2021 0 0 View

fatal error

16 June 2021 0 0 View

fatal error

16 June 2021 0 0 View

Arena simulation - how do i model the following model in ARENA (see description) (new to ARENA)?

Hello, I'm fairly new to ARENA and I have the following problem: I have two queues in which, in each queue, a different order type arrives (both having an arrival rate of exponential 10). Order...

02 March 2021 2,431 3 View

Why are the velocities so high in my Boussinesq approximation Fluent simulation?

Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...

02 March 2021 4,910 3 View

Why the results when using wall thickness and when using shell conduction are different in ansys fluent?

Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...

01 March 2021 9,537 2 View

How can I integrate a routing protocol in a tiny device (e.g. Raspberry Pi)?

Hi Community, I'm facing the issue of integration/compiling a new routing protocol in a WSN simulator. The final goal is to successfully add, configure this routing protocol in hardware devices...

01 March 2021 9,332 6 View

Joint behaviour in Abaqus is not captured well?

I am working on roof joint and trying to simulate the behaviour in Abaqus. I am successful in running the model but the final graph does not follow the experimental curve in the negative direction...

01 March 2021 6,661 3 View

In Molecular Dynamics Simulation, how do I make changes to the force field according to my protein?

Hi In Molecular Dynamics Simulation, how do I make changes to the force field according to my protein? I got this error in the add-ion stage: Fatal error "./ amber99sb-ildn-HHH.ff / force...

01 March 2021 8,747 4 View