Can anyone help me in this MATLAB Coding?

Hello, I have a dataset excel CSV sheet with a three columns,(X,Y, and Z) The first and second columns represents the coordinates of point, while the third one represents the elevations value of...

04 February 2021 3,451 3 View

How to install caffe with anaconda??

I have an environment in anaconda with set of packages installed. how to install caffe on this environment? Thanks in advance

15 June 2020 891 1 View

What's a good cytosolic marker and a loading control other than Tubulin?

I am running a simple western experiment (using WES machine) where I test cytosolic versus nuclear fractions of mouse B cells (Using only 1million cells) and unfortunately Tubulin signal is not...

11 February 2019 1,035 3 View

No title

how prepare this mix morality in constant total volume 800 ul

04 June 2018 9,451 3 View

What is the best applicable inhibitor of autophagy?

14 February 2017 6,813 15 View

How do I connect a DC high voltage power supply to a rotating drum?

We are building an electrospinning system and we have tested the fiber produced and we found that we have reached nano-scale. Now, we want to optimize this system by installing a drum with motor...

28 January 2017 996 3 View

How can I increase the electrical conductivity of PVA (Polyvinyl alcohol) for electrospinning?

I want to add polymer or substance to increase the electrical conductivity of PVA that I use it to produce nano-fiber by electrospinning method.

15 August 2015 229 3 View

Why are the velocities so high in my Boussinesq approximation Fluent simulation?

Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...

02 March 2021 4,910 3 View

How to define and get results (stresses) for certain points of a model in abaqus, using python? When the size of the model changes?

I want to do a parameter study of a aixsymmetric cylinder in Abaqus. I want to create several jobs where I get the stresses for 3 different points in my model. These points are defined. I wrote a...

01 March 2021 10,078 1 View

Why the results when using wall thickness and when using shell conduction are different in ansys fluent?

Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...

01 March 2021 9,537 2 View

Joint behaviour in Abaqus is not captured well?

I am working on roof joint and trying to simulate the behaviour in Abaqus. I am successful in running the model but the final graph does not follow the experimental curve in the negative direction...

01 March 2021 6,661 3 View

How much pressure we can reduce at the outlet to avoid Reverse Flow?

I am simulating Heat Exchanger. I have tried and tested all the methods to resolve this issue from the internet like refining mesh, improving skewness and orthogonal quality ,extending outlet to...

01 March 2021 6,985 3 View

Which one is easier and better at modeling slender masonry structures? ANSYS or ABAQUS?

I need to model masonry and reinforced concrete minarets for my MSc thesis. Which one is easier and better at modeling slender masonry structures? ANSYS or ABAQUS? (Or any other program for just...

01 March 2021 736 3 View

How to assign different material properties to each element in Abaqus ?

Hello, I am writing a python script to generate my model and write the input file. The problem is I have 1000 elements in my mesh and I want to assign different material properties to each...

01 March 2021 9,511 3 View

How to define tie constraint between rigid body and another part in dynamic explicit model of Abaqus?

Hi dear researchers I connected a rigid body into the part of my structure by tie constraint and then I added displacement to rigid body, in static general step every thing is fine and these two...

28 February 2021 3,442 2 View

How to modify Johnson cook equation in ABAQUS?

I wanted to add an extra parameter to the existing Johnson cook equation in the ABAQUS simulation. How to add those extra parameters. Ref: A modified Johnson-Cook material model with strain...

28 February 2021 4,841 3 View

For modelling epoxy-based matrices (in composites), which model in ABAQUS is the most suitable, Concrete damaged plasticity or Drucker-Prager model?

I am working on developing a micromechanical FE model for predicting kink-band formation in UD composites. To model matrix plasticity, which model, out of Concrete Damaged Plasticity and...

28 February 2021 5,415 1 View