this is as-cast and normalized aluminum.
Are they present unetched?
Geoffrey Robert Warburton
no, they are only visible after etching, and the alloy is pure aluminum.
I would like to recover viruses from ground water to do metagenomic sequencing. From my reading I found the researchers used cellulose nitrate filter membranes. In Egypt the available filter...
16 November 2022 9,838 3 View
Special issue Vs a regular issue
29 October 2022 9,499 2 View
To make an Interferogram formation, we need to use a Digital Elevation Model (DEM) for removing the Earth's topographic component from the pairs. My question is about the possible used DEMs for...
25 October 2022 1,874 2 View
I am working on crashworthiness optimization for double hull tanker, I built a parametrci model using ansys apdl macro code , now I need to import the meshed model in ls-prepost or to find a way...
30 August 2022 198 0 View
GPR - Ground penetrating radar
30 August 2022 9,902 2 View
Hello, I have a dataset excel CSV sheet with a three columns,(X,Y, and Z) The first and second columns represents the coordinates of point, while the third one represents the elevations value of...
04 February 2021 3,705 3 View
If the deep ore body extraction were conducted from the geothermal well what kind of fluid will you suggest and why?
03 January 2021 5,770 4 View
I have an environment in anaconda with set of packages installed. how to install caffe on this environment? Thanks in advance
15 June 2020 1,053 1 View
Hi, I need benchmark datasets for Android malware /benign API call sequences. The API call sequence is the ordered sequence of APIs that appears during dynamic analysis for android applications
04 May 2020 6,246 7 View
I'm trying to simulate reinforced concrete column under blast load in abaqus using coupled euler lagrange technique. I done every thing but the model don't feel the explosion. I think the problem...
31 January 2020 8,825 3 View
It is required to make a precursor gel for a SAPO-11 Zeolite, the compounds are the following: * As a source of Al: Aluminum Isopropoxide (98%) Formula: C9 H21 O3 Al PM: 204.24 g/mol Density:...
01 July 2024 617 3 View
I am doing orthogonal cutting of aluminum. My forces are changing according to mass scaling. How to decide the scaling factor?
01 July 2024 3,749 0 View
I am doing 2D orthogonal cutting simulation in ABAQUS for aluminum. Reducing mesh size up to 0.08 mm reduces the error to 3% but further reduction leads to increase in error from 3 to 39%. Why I...
23 June 2024 9,080 0 View
I am doing orthogonal machining of aluminum in 2D. However, when partitioning for depth of cut with a sketch on face strategy with a parting line, it says that face could not be partitioned. How...
18 June 2024 8,000 0 View
What share is made of steel? Plastics and glass? Aluminum? Iron?
15 June 2024 7,246 2 View
Interesting and of piston production methods.
27 May 2024 1,112 3 View
while designing of stirling type pulse tube cryocooler which parameters are considered for meshing material of regenerator? and Out of Brass,Copper,Gold,Aluminum,Stainless steel,Silver Which is...
22 May 2024 3,728 0 View
I am currently simulating the impact of a zinc interlayer between Aluminum workpieces in ABAQUS (Friction stir welding process). While it was easy to find in literature the Johnson-Cook...
21 May 2024 1,643 0 View
I have noticed massive media evaporation (>50% volume) from culture dishes after 72-96hr inside a Memmert ICO50 hypoxic incubator (Temp: 37C, humidity: 86%, CO2: 5%, O2: 1%). I've confirmed the...
29 April 2024 9,872 1 View
I am an undergrad student and I need to suggest optimum amount of PVA to be added in Aluminum powder for achieving improved sinter density. Your guidance will mean a lot to me. Thanking in...
25 April 2024 4,892 0 View