How will be the TG/DTA helpful to evaluate the carbon content in the sample?

05 June 2019 6,316 2 View

What thickness of copper foil we should use for lithium ion battery electrode?

Dear Friends What should be the standard thickness of copper foil to use as anode electrode fabrication for lithium ion battery. There are 3-4 option available such as 8, 10, 12, 15...

06 July 2018 3,450 0 View

The theoretical capacity of NiMnO3 (Anode Material) is 994.9 mAh/g. is it correct?

I wanted to calculate the theoretical capacity of NiMnO3, which will be use as anode material for LIB. It is very hard to get it through literature. So I have calculated it like this: NiMnO3 +...

03 April 2018 4,205 4 View

Any literature availability where interparticle pores and intrapores of porous nanomaterials are discussed ?

Kindly help me to find out the detail discussion about interparticle pores and intrapores present in a porous nanomaterials.

31 December 2017 9,582 0 View

If sample is mesoporous and EIS spectra (Nyquist plot) shows deformed semicircles, how it is connected with porous path ways extrinsically ?

If sample is mesoporous and EIS spectra (Nyquist plot) shows deformed semicircles, how it can be correlated with Li+ conducting extrinsically over different porous path ways, in addition to...

31 December 2017 3,433 1 View

Is it correct that mesoporous structures gives large XRD peaks in small 2 theta ranges due to the regular arrangements of porous channels and cages ?

is it correct that mesoporous structures gives large XRD peaks in small 2 theta ranges due to the regular arrangements of porous channels and cages ? If the sample is mesoporous, but XRD peaks...

31 December 2017 8,907 5 View

Water based Battery?

We have made a 2.0 V battery with Graphite and Aluminium electrodes. When we spray water, we started getting stabilized current and LED glow. What will be the oxidation/reduction reaction on both...

03 April 2017 6,284 5 View

Impact factor link ?

Any one has link to get new impact factor of the journals. Thanks

03 April 2017 7,810 0 View

Can someone help me with half cell battery fabrication?

06 July 2015 2,084 14 View

How can a sodium ion system use the electrolyte at lower decomposition potential?

If a rechargeable sodium-ion battery with good performance characteristics could be developed, it could have the advantage of using electrolyte systems of lower decomposition potential due to the...

09 October 2014 7,054 2 View

Why does blocking with my immunogenic peptide cause nuclear fluorescence in ICC?

Hi all, I am validating a polyclonal antibody raised against human ANT4, through WB and ICC. In most of my controls, the antibody shows very little off-target binding, but when I pre-incubate the...

03 March 2021 5,999 3 View

Does Napabucasin soluble in dichloromethane and in ethanol?

I need to prepare a solution of Napabucasin (inhibitor of cancer cell stemness) in dichloromethane. The drug is expensive, so maybe somebody already tried to do it. If it is soluble, what is the...

02 March 2021 9,945 3 View

Sutter electrode holder leaking after applying positive pressure. How to fix?

I am using a Sutter electrode holder for my patch clamp experiments, but I'm having trouble keeping positive pressure inside my electrode due to a leak out of the back of the holder. I have added...

02 March 2021 5,829 1 View

Help request in CST microwave?

im working now on TPV solar cells and metamaterials and i realy need our help in CST microwave i have a tpv cell simulation and i want to extract particullarly the absorbtion of only the active...

02 March 2021 2,246 2 View

What thickness need for ITO to use as conductive layer?

I want to do RF sputtering of ITO on glass substrate using magnetron sputtering. what thickness do i need to make it good conductive layer to use it for PSC. Moreover, whats about thickness of...

01 March 2021 395 3 View

Dapi fluorescence protocol for colon cell lines ?

28 February 2021 2,534 2 View

Why is my platinum counter electrode getting dirty during electrodeposition?

I am conducting anodic electrodeposition of MnO2 onto a stainless steel substrate, using a platinum strip as a counter electrode. This is done galvanostatically, with the current held between 5...

27 February 2021 1,829 3 View

Does RNAiMAX transfection reagent work in serum free medium?

I diluted siRNA and RNAiMAX in opti-MEM and added to the cells which they were in the growth medium. Is it a right way? or should I culture cells in the opti-MEM medium for a while and not in...

26 February 2021 10,041 3 View

Has anyone had luck using cell lines other than HEK 293 (such as COS1) to package lentivirus?

I am looking to package lentivirus in endothelial cells but I am opposed to using 293 cells due to personal ethics regarding the source. I have done some reading and saw that COS1, COS7, & CHO...

25 February 2021 3,030 1 View

Unknown debris sheets observed in cell culture flasks?

Hi, We culture neural progenitor cells in T175 culture flasks coated with PLO-Laminin. We have successfully grown these cells with our protocol for months. Recently, we observed large sheets...

25 February 2021 3,443 4 View