What will be the die specification to cut Anode, Cathode and Separator for CR2032 coin cell (LIBs) ?

Hi Everyone Since I have CR2032 coin cell for lithium ion battery, what will be the die specification in mm for Anode, Cathode and Separator ? I am bit confused. Everywhere looks different...

10 November 2019 2,296 3 View

How will be the TG/DTA helpful to evaluate the carbon content in the sample?

05 June 2019 6,316 2 View

What thickness of copper foil we should use for lithium ion battery electrode?

Dear Friends What should be the standard thickness of copper foil to use as anode electrode fabrication for lithium ion battery. There are 3-4 option available such as 8, 10, 12, 15...

06 July 2018 3,450 0 View

The theoretical capacity of NiMnO3 (Anode Material) is 994.9 mAh/g. is it correct?

I wanted to calculate the theoretical capacity of NiMnO3, which will be use as anode material for LIB. It is very hard to get it through literature. So I have calculated it like this: NiMnO3 +...

03 April 2018 4,205 4 View

Any literature availability where interparticle pores and intrapores of porous nanomaterials are discussed ?

Kindly help me to find out the detail discussion about interparticle pores and intrapores present in a porous nanomaterials.

31 December 2017 9,582 0 View

Is it correct that mesoporous structures gives large XRD peaks in small 2 theta ranges due to the regular arrangements of porous channels and cages ?

is it correct that mesoporous structures gives large XRD peaks in small 2 theta ranges due to the regular arrangements of porous channels and cages ? If the sample is mesoporous, but XRD peaks...

31 December 2017 8,907 5 View

Water based Battery?

We have made a 2.0 V battery with Graphite and Aluminium electrodes. When we spray water, we started getting stabilized current and LED glow. What will be the oxidation/reduction reaction on both...

03 April 2017 6,284 5 View

Impact factor link ?

Any one has link to get new impact factor of the journals. Thanks

03 April 2017 7,810 0 View

Can someone help me with half cell battery fabrication?

06 July 2015 2,084 14 View

How can a sodium ion system use the electrolyte at lower decomposition potential?

If a rechargeable sodium-ion battery with good performance characteristics could be developed, it could have the advantage of using electrolyte systems of lower decomposition potential due to the...

09 October 2014 7,054 2 View

Is There Any Feasible Method To Test Fluorescent Compounds Other Than Fluorescence Spectrometers ??

Is There Any Feasible Method To Test The Efficiency Of Fluorescent Compounds Other Than UV Spectrometers ? Suggestions Would Be Appreciated !

02 March 2021 5,785 3 View

How to model the battery pack in PSIM or PSCAD?

Hello, I have simulated a single battery cell using Thevenin equivalent circuit. For a battery pack, I have a large number of cells connected in series and parallel connections. Is there any way...

28 February 2021 2,116 1 View

How to find the right number of integration points in second order 3d finite elements?

I am familiar with finite element simulations and numerical schemes like the Gauss Legendre quadrature. I also know that the Gauss integration yields exact values for polynomials up to degree 2n-1...

27 February 2021 6,818 3 View

High aspect ratio hexahedral mesh optimization solver?

I am interested in evaluating mesh optimization solvers that converge to high aspect ratio unstructured hexahedral grids. In other words, I am interested in a solver that optimizes warpage,...

26 February 2021 7,279 2 View

Why initial concentration of Pb not the same as calculated one when testing using AAS?

I am currently doing research on the adsorption of heavy metal using magnetic reduce graphene oxide. I use AAS to determine the concentration of the heavy metal. I prepare the Pb solution with...

26 February 2021 9,580 4 View

What information can be had from raman at higher wavenumber?

i have recorded raman spectra of strontium oxide thin film. the spectra were recorded in the range 400 to 4000 cm-1. i have reference to peaks upto 1000cm-1. but i couldn't find literature for...

26 February 2021 2,499 1 View

How can I find a Raman spectrum wavenumber corresponding to what compound?

I have several Raman spectra with very distinct peaks at certain wavenumbers, such as 277, 359, 466, 583, 623, 686, and 795cm-1. How can I identify them to what compound(s)? The RRUFF and others...

24 February 2021 363 3 View

Anyone with some Transgenomic Wavemaker software? Seeking help from the chromatography community?

I am trying to seek out some Transgenomic Wavemaker software (happy to purchase a computer too) to operate a fraction collector. The only way to connect to the fraction collector so far is to...

23 February 2021 9,181 1 View

Is this the write procedure for acid digestion of soil for heavy metal analysis using AAS?

How to do acid digestion of soil sample with 3:1 aquaregia in an open vessel?

23 February 2021 3,053 7 View

How to validate regridding results of environemental data to higher spatial resolution in R?

I am working with several continous, environmental marine datasets at varying original spatial resolutions. My aim is to regrid each dataset to one common, high resolution grid. I am currently...

22 February 2021 2,290 2 View