Kindly help me to find out the detail discussion about interparticle pores and intrapores present in a porous nanomaterials.
Hi Everyone Since I have CR2032 coin cell for lithium ion battery, what will be the die specification in mm for Anode, Cathode and Separator ? I am bit confused. Everywhere looks different...
10 November 2019 2,428 3 View
If there is a small amount of carbon still in the sample after even annealing at 600 ℃ in an air atmosphere, how the TG/DTA characterization will be helpful to detect the carbon in the sample....
05 June 2019 6,431 2 View
Dear Friends What should be the standard thickness of copper foil to use as anode electrode fabrication for lithium ion battery. There are 3-4 option available such as 8, 10, 12, 15...
06 July 2018 3,558 0 View
I wanted to calculate the theoretical capacity of NiMnO3, which will be use as anode material for LIB. It is very hard to get it through literature. So I have calculated it like this: NiMnO3 +...
03 April 2018 4,353 4 View
If sample is mesoporous and EIS spectra (Nyquist plot) shows deformed semicircles, how it can be correlated with Li+ conducting extrinsically over different porous path ways, in addition to...
31 December 2017 3,546 1 View
is it correct that mesoporous structures gives large XRD peaks in small 2 theta ranges due to the regular arrangements of porous channels and cages ? If the sample is mesoporous, but XRD peaks...
31 December 2017 9,036 5 View
We have made a 2.0 V battery with Graphite and Aluminium electrodes. When we spray water, we started getting stabilized current and LED glow. What will be the oxidation/reduction reaction on both...
03 April 2017 6,417 5 View
Any one has link to get new impact factor of the journals. Thanks
03 April 2017 7,925 0 View
(i) is the active material electrode area (half cell) affecting the capacity as well as OCV ? (ii) is the counter electrode area (lithium foil, half cell) affecting the capacity as well as OCV...
06 July 2015 2,201 14 View
If a rechargeable sodium-ion battery with good performance characteristics could be developed, it could have the advantage of using electrolyte systems of lower decomposition potential due to the...
09 October 2014 7,203 2 View
I need to do some experiment with it in liquid form.
07 August 2024 613 3 View
I used material studio app dmol3 module for geometry optimization for a nanotube, and then I calculated its energy, for some of gas phases and I actually had the outmol file which allows me to...
14 June 2024 5,636 0 View
What's the way out of this problem? Can the single-crystal technique do this task? If yes, What if we also can't make a single crystal of this powder material?
23 May 2024 6,163 2 View
When using different laser energies, what is the effect on the size of nanoparticles? Does it increase or decrease with increasing energy? Please help
15 May 2024 4,690 2 View
actually what is the main difference between chemical synthesis and green synthesis of nanoparticles? while compared to chemical synthesis, how green synthesis reduce the toxity of prepared...
02 May 2024 8,087 3 View
Nanomaterials in a powdered form are challenging to use in laboratory concrete specimen casting. This is due to the minute-sized particles and the safety considerations. Therefore, there is a need...
14 April 2024 5,740 2 View
what is the procedure of synthesis of nanomaterial -Bottom-up -Chemical Etching? Advantage and disadvantagesAdvantages of this technique?
04 April 2024 2,522 2 View
Role of activator and sensitizer and how we select their concentration?
23 March 2024 860 2 View
Is the journal of nanotechnology research a predatory Journal? https://www.fortunejournals.com/journal-of-nanotechnology-research-aimsscope-fjnr.php
19 March 2024 3,503 4 View
In the green synthesis approaches of silver nanoparticles, do plant extracts solely influence secondary metabolite compounds that act as reducing agents and antioxidants? Or do the antibacterial,...
19 March 2024 8,064 4 View