29 November 2017 4 3K Report

Electrode material

More Arnab Sil's questions See All
How to do mono formylation of N,N-diethyl-3-methoxybenzamide?

I have attempted the formylation of the above mentioned compound using a very well reported protocol using secondary Butyl Lithium and TMEDA at - 78 degrees Celsius. I have done it quite a few...

08 February 2021 2,793 2 View

Is there any solvent which can be used for ammonia and H2S separation other than caustic or strong acids?

Is there any particular solvent which can selectively remove H2S from ammonia? As amine solvents cannot be used for H2S separation because ammonia is present which will create a problem fro amine...

03 August 2020 747 3 View

Alternatives to Matplotlib and Plotly for Data Visualization in Python?

I work extensively with Objective data (Time Series for Temperature, Relative Humidity, Heat Flux Measurements, Air Velocity etc.) and Subjective Data (Comfort Perception and preferences). Till...

07 May 2020 6,784 4 View

Can anybody please send me MatLab code for oppotion based PSO/BBO?

Opposition based learning

05 April 2020 659 4 View

I want to purchase Laponite XLG (nanoclay). Can anybody suggest me about its suppliers in India?

This material is commonly used as rheology modifier and has wide usage in the cosmetic industry.

17 November 2019 7,804 2 View

What will be the optimum organic loading rate (OLR) for a two stage Anaerobic biodigester?

thermophilic followed by mesophilic set up. Indvidual optimum OLR for thermo and meso. As per literature review, Thermophilic olr is 5-8kg/m3/day and for mesophilic it is 3-5 kg vss/l /day

19 May 2019 3,335 8 View

Is it possible to simulated participating media(radiation) problem in ansys fluent ? please suggest?

is it possible to simulated participating media(radiation) problem in ansys fluent ? please suggest?

02 May 2019 2,184 2 View

Is there a in-built function in MATLAB for identifying an arbitrary point with a particular voronoi cell?

I have a voronoi cell structure. I also have some arbitrary points. I need to know if there is an in built function in MATLAB to identify which arbitrary point comes under which point's domain of...

09 April 2019 8,770 1 View

What is the basis for the effective radius not being equal to the physical radius when using IBM for solving fluid-particle interactions?

For fluid particle interations, specially sedimentation problems, when I am using the direct forcing immersed boundary method, the calculation of the torque is not exactly accurate. I have read in...

16 December 2018 2,626 3 View

Is there any library to find the molar extinction coefficients of compounds?

I need the molar extinction cefficient of 3,5-di-tert-butyl-1-oxacyclohepta-3,5-diene-2,7-dione

19 July 2018 899 4 View

Similar questions and discussions
Sutter electrode holder leaking after applying positive pressure. How to fix?

I am using a Sutter electrode holder for my patch clamp experiments, but I'm having trouble keeping positive pressure inside my electrode due to a leak out of the back of the holder. I have added...

02 March 2021 5,829 1 View

What thickness need for ITO to use as conductive layer?

I want to do RF sputtering of ITO on glass substrate using magnetron sputtering. what thickness do i need to make it good conductive layer to use it for PSC. Moreover, whats about thickness of...

01 March 2021 395 3 View

Why is my platinum counter electrode getting dirty during electrodeposition?

I am conducting anodic electrodeposition of MnO2 onto a stainless steel substrate, using a platinum strip as a counter electrode. This is done galvanostatically, with the current held between 5...

27 February 2021 1,829 3 View

How does charge on working electrode changes with rising potential?

During performing CV of a GCE or modified GCE, we rise the potential in the first half of the cycle and reduce it in reverse half. During the first half, what is the nature of charge on GCE or...

25 February 2021 7,994 3 View

How to troubleshoot Electrochromic Films and Electrochromic Devices?

I am trying to characterize an electrochromic system. The system uses ITO electrodes on glass, WO3 as the electrochromic film, and NiO as the ion storage layer. When I deposit NiO and WO3 and...

23 February 2021 9,592 2 View

How does elongation affect the resistance of an electrode?

What are the testing rate for electrodes recommended by ASTM for cochlear implants. I am currently doing the 15mm/min elongatio testing.

22 February 2021 1,515 1 View

Is that possible to do an impedance measurement without FRA module?

One of my colleagues said, "the impedance you can measure with the three electrodes and with the specific sequence varying the frequency" Is it possible to configure the potenciostat without the...

21 February 2021 418 2 View

Do you know this error? The experiment was stopped by a potential overload on Vs (auxiliary electrode)?

Hello everyone Do you have any information about this error 'The experiment was stopped by a potential overload on Vs (auxiliary electrode)' in Origamaster software? I tried everything possible,...

19 February 2021 3,152 7 View

Which compound is getting oxidized during bulk electrolysis with TFAA?

The experiment is really simple. When I do a bulk electrolysis with 1% TFAA (ACN solution) to get dihydrogen, what is going to be oxidized? (working electrode graphit, counter electrode platinum,...

18 February 2021 4,430 1 View

Not able to charge-discharge Li-ion coin cell at higher C rate ?

I am working on cathode material. I have made different Li-ion coin cell against Li metal using commercial available cathode materials such as LCO,LMO, LFP and NMC and also with the lab...

18 February 2021 1,450 3 View

Our partners will collect data and use cookies for ad personalization and measurement. Learn how we and our ad partner Google, collect and use data. Agree & close