When chromates are used as a corrosion inhibitor, is there an optimum concentration for all alloy systems?
Dear Vinod Upadhyay ;
The concentration of the chromate inhibitor concentration depends on the service used, and the type of the corroded metal, as detailed in TABLE 10.1 in the attached reference. https://www.uv.mx/personal/rorozco/files/2011/02/CORROSION-INHIBITORS.pdf
Thank you Dr. Mahmood!
Dear Dr. Vinod Upadhyay ,
I suggest you also to have a look at the following, interesting paper:
-Chromate replacement: what does the future hold?
Oumaïma Gharbi, Sebastian Thomas, Craig Smith and Nick Birbilis
npj Materials Degradation, 2:12 (2018) - doi:10.1038/s41529-018-0034-5
Available at: https://www.nature.com/articles/s41529-018-0034-5.pdf
This paper highlights the negative impact of chromium compounds on the environment and human health.
This has led to the need to revisit most of the current industrial corrosion protection measures.
The work traces the origins of the reasons for replacing chromium, introducing the various regulations
actions to reduce the use of chromium compounds and critically review preventive alternatives to corrosion technologies developed in the last decades.
My best regards, Pierluigi Traverso.
I have carried out MFC experiments on three different volumes, 50, 500 and 1000 mL of wastewater. Results after MFC treatment shows that TDS and EC are more in larger volumes of water i.e. TDS and...
09 August 2024 9,621 0 View
Pig slurry is rich in major and minor nutrients. Is there any way to improve / Enrich its manure quality to be used in agriculture organically ? please share your knowledge.
09 August 2024 5,605 2 View
Hi, I'm currently working on a project where I need to plot the atom-projected band structure using GPAW. I've been able to calculate the band structure for my material, but I'm having trouble...
07 August 2024 269 3 View
Hi, we have measured tryptic peptides using both DDA and DIA method on QExactive. In DDA replicates i saw unusual intensity drops occurring at the same sections of chromatograms in DDA replicates...
07 August 2024 3,218 4 View
Hi How can this equation Ln(LA) = 1.038 + 0.89 ln(X) be applied to calculate the leaf area of a tomato? Can you explain with an example and what is the substitution of Ln and ln?
06 August 2024 2,508 2 View
I aim to be as skeptical as possible regarding whether a pair of orthologous genes results in the same phenotype in their different but related bacterial organisms under similar environmental...
05 August 2024 6,787 4 View
I ran a SDS-page of a bacterial lysate and I want to quantify protein concentration in a specific band. I was thinking of using a standards ladder or make some standards are different...
05 August 2024 9,805 3 View
XRD Analysis is showing only Calcium carbonate. It is not showing other compounds. Can anyone help me get the other compounds
04 August 2024 3,019 3 View
I work on MCF7 cell cell for anticaner purpose and I wa to do drug preperation the drug ( secondary metabolites extracted from Aspergillus) My question which solvent is better with these secodary...
03 August 2024 4,725 2 View
Machine learning (ML) has shown great potential in predicting the compressive strength of concrete, an important property for structural engineering. However, its practical application comes with...
03 August 2024 2,546 2 View
I am currently working on a project that involves extracting cell membranes, for which we disrupt the cells using sonication. During the initial extraction process, we add protease inhibitors to...
30 July 2024 7,077 1 View
In general, when performing a Tafel analysis for corrosion resistance measurements, a line voltage scan is performed from say -250 to +250 mV vs. OCV at low scan speed around 0.125 mV/s. However,...
25 July 2024 7,982 3 View
I am looking to purchase a photography kit for onsite metallurgical investigations, such as capturing photos of worn areas, hot tears, cold tears etc. Could anyone suggest me a good...
22 July 2024 3,490 2 View
There are three factors involved in the activity, the substrate acting as a substrate, the substrate acting as an inhibitor and another inhibitor for which you want to measure the Ki.
08 July 2024 4,988 1 View
Would anyone be interested in collaborating on corrosion?
07 July 2024 4,726 2 View
we need surface area, corrosion current, equivalent weight and density of the metal involved for corrosion rate calculation in mm/year (lets say). For dissimilar metal welds, how can we measure...
30 June 2024 5,943 2 View
I am working with a polysaccharide grafted on chitosan and my corrosive medium is 3.5 wt% NaCl. My surface is carbon steel. I am struggling to obtain a proper trend for my corrosion results. I am...
29 June 2024 5,592 1 View
Corrosion studies by electrochemical measurement.
19 June 2024 5,274 3 View
Hello esteemed scientists, I am endeavoring to increase the yield of my recombinant protein. It is a 120 kDa protein tagged with MBP and features three intrinsically disordered regions with pI...
12 June 2024 9,616 8 View
Antiplatelet Therapy: Mechanisms, Indications, Administration Can you explain the potential toxicity and overdosemanagement of commonly used antiplatelet drugs?
05 June 2024 6,447 1 View