What is the role of lattice parameter?

12 December 2015 0 1K Report

In some results lattice parameter increases and in other cases it decreases. is there any specific reason for this?

Badges
Science topic

More Raji Sudha's questions See All

In nickel manganese deposits, saccharin addition reduces the Mn content in the film. can any one tell me the reason for this?

I have prepared NiMn thin film with different additives. Due to the saccharin addition and thio urea addition Mn content in the film found to be reduced. Why?

11 December 2015 6,046 8 View

Saccharin is a best stress reducer. why?

Many journals reported that saccharin is a best stress reducer in nickel based thin film. but why it reduces stress.

11 December 2015 4,734 3 View

What is the role of saccharin in thin film preparation?

i have prepared nickel based thin film with saccharinas an additive. will it reduce stress? if yes please tell me why? will sulfur content present in eds spectrum? is it considered as the source...

11 December 2014 7,973 4 View

How to use fullprof suit tool bar application for xrd study?(javascript)

For an XRD study I have downloaded the fullprof tool bar. But I could not use it. Because I have files with a uxd extension. How to convert it to dat or exe extension. If there is any other...

11 December 2014 1,869 3 View

How do you choose a JCPDS card for matching HKL values?

For a particular material we have a JCPDS card. How do we choose it? Is there any condition for choosing a particular card?

11 December 2014 1,747 7 View

Anybody have the paper for NiMnP thin film?

11 December 2014 3,109 0 View

What is the value of youngs modulus of NiMn thin film?

I have prepared NiMn thin film. To measure stress I need to submit the value of Young's modulus.

10 November 2014 2,033 4 View

Which type of magnertic material is Mn?

Some journals reported that Mn is an antifero magnetic material and some reported that it is an paramagnetic material. which is true?

10 November 2014 3,384 6 View

What is the range of coercivity for hard and soft magnetic material?

I have studied the magnetic property of the ni based film. its coercivity is 709G.Is it hard or soft magnetic material? Is there any range for hard and soft magentic material? I have attached the...

10 November 2014 1,543 16 View

What are the additives used in electrodeposition of Ni based film to reduce the coercivity?

i have prepared nimn thin film. I have used urea and thio urea as an additive. Urea increases the coercivity whereas thio urea decreases it. What is the reason behind it?

10 November 2014 5,379 3 View

What is the reason for current dropping in OER , LSV curve?

I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...

10 August 2024 3,629 1 View

What may be the reasons for failures of Tube toi Tube Sheet Joints in Boiler Drum ?

We have observed that tube to tube sheet joint leaked in our boiler and needs to overcome same by knowing the root cause.

08 August 2024 3,161 0 View

Do I need specific antibodies to stain for a fusion protein?

I am staining some brain sections stored in cryoprotectant that express a Histone H2B- GFP fusion protein that were generated ~10 years ago. I know I need to enhance signal with an anti-GFP...

07 August 2024 5,338 2 View

What is the problem with these tissue culture plants?

All plants are green but some of these plants becomes yellow. I did not found any reason. Please help me to find out the real problem.

01 August 2024 589 4 View

Reason for discontinuities in my Band structure?

Hey All! I am wondering what might be wrong with my band structure. I did the calculations using VASP and plotted the results using Origin. Although I have tried changing various input...

25 July 2024 2,920 11 View

Is it fare for editors of reputed Journals to put on hold manuscripts more than six months without review updates, Are they harassing researchers?

It is being seen that Editors of some reputed Journals are putting on hold the manuscripts and not updating review states even passing more than six months from submission. Researchers are...

24 July 2024 8,596 2 View

Has anyone tried freeze flow samples in -80C freezer or liquid nitrogen before processing?

Our lab has some radioactive cell samples that need to be kept frozen for at least 30 days before flow analysis. For some reason, the samples stored in liquid nitrogen did not perform as well as...

15 July 2024 9,975 1 View

What are the criteria that must be retained for the development and validation of a qualitative NMR method ?

Dear Community, I would like to develop and validate a qualitative NMR method for the analysis of a specific category of chemicals, and my question is the following: What are the criteria that I...

08 July 2024 1,402 4 View

My Cyclic voltammetry curve doesn't show cathodic peak of Cu2+ to Cu+. how to solve this problem?

I performed CV of Cu-MOF in a buffer solution of pH 8, and we did not find any peak corresponding to Cu2+ to Cu+. What is the reason behind this? Please give your valuable suggestions.

08 July 2024 2,388 4 View

Hello, I’m growing three species of microalgae under heterotrophic and mixotrophic conditions. Both the two turned yellow?

What could be the reason for mixotrophs to be yellow too instead of green? Thank you

08 July 2024 594 2 View