What is the relationship between the weights of MWCNT:CNF and the thickness of the coating?
What is the best way to find the postdoctoral position in Superhydrophobic field?
03 April 2019 387 1 View
Does the thickness of the coating affect the studied surface properties (anti-icing, super hydrophobicity, and anti-fouling)?
05 June 2018 8,102 0 View
what is the main role of adding PTFE and PVDF into the carbon family like graphene, CNT, and CNF?
08 September 2016 7,825 0 View
I was totally confused to measure the tensile strength of the prepared CNF/PVDF composite coating.The thickness of the coating is 0.5 mm, is that nanoindentation method is convenient for this coating.
08 September 2016 7,347 2 View
I can used various solvents to get the uniform dispersion . But unfortunately I was totally confused to find which one is better after all I want to know why ethanol act as a good solvent when...
07 August 2016 3,400 3 View
I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...
10 August 2024 3,629 1 View
How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...
10 August 2024 942 3 View
How do interactions between the biosphere, the carbon cycle, and the water cycle impact global warming and interaction between the atmosphere and the hydrosphere?
09 August 2024 3,291 2 View
I did PR spin coating on trench structure. I used AZ P4620 PR and the thickness or PR is around 11um. The substrate is Si. And my trench structure depth is 141um(negative way). Even though I...
08 August 2024 2,298 0 View
I have been getting a low plasma and no coating while doing rf sputtering of copper doped ZnS using a power of 140 watts and at pressure of 6.5x10-3 Mb.
07 August 2024 4,526 4 View
Global ‘Weather’ has stopped, as ‘aqua thermionic instituted by the ‘Global thermo atmospherics has instituted global thermodynamics of 120º C + and thus all waters are, or have boiled into a...
06 August 2024 8,716 0 View
The starting material is a finely ground powder. Some particles contain more graphene than others.
30 July 2024 3,978 2 View
I am currently working on modeling FCC catalyst regeneration and have come across a point of uncertainty that I hope you can assist me with. In my previous models, I have utilized lumped kinetics...
30 July 2024 6,137 0 View
I am trying to coat my micelles and PLGA based nanoparticles with cell membrane using an Avanti mini extruder according to literature . I use 200nm membrane but my particles end up to be 400nm And...
30 July 2024 3,294 3 View
A computational study of heat flux on cylindrical surfaces using CNT hybrid nanofluids
28 July 2024 4,985 1 View