I got XRD peak at 43.11 degree of silicon doped ZnO. For which component this peak aeries, SiO, SiO2, ZnO, Si, Zn?
Is there only one peak in the XRD spectrum? Have you calculated interplanner spacing for 43.11?
You can consult the following free database:
http://crystdb.nims.go.jp/index_en.html
Best regards
Pedro
For black silicon production which RMS roughness is better?
01 January 1970 5,606 3 View
I want to clean corning glass.
01 January 1970 6,135 0 View
Actually, I want to find the relationship between XRD peak intensity with conductivity and transmission of any TCO (Transparent Conducting Oxide) material.
01 January 1970 1,341 3 View
Both Si and Sn are tetravalent. SnO2 is conducting but SiO2 is insulating. Please give a reason with chemical
01 January 1970 4,875 0 View
I want to know about the plasma mechanism at the time of plasma etching of crystalline silicon wafers with atomic hydrogen plasma etching. In ICP-PECVD system only atomic hydrogen can etched...
01 January 1970 4,791 3 View
Require for Rietveld refinement in XRD.
08 August 2024 3,081 2 View
During low-temperature testing, new diffraction peaks that appear could be indicative of several phenomena. In one of our tests, we observed notable new peaks around 40° and 45° in a specific...
06 August 2024 726 3 View
I want to refine one XRD peak of my in-situ xrd but the background is never working good which ultimately fails the refinement. How to refine and adjust the background using GSAS-II
05 August 2024 5,291 2 View
I have been using paraffin, but the deposited ZnO still detach from electrode. What is the best binder to modify graphite paste electrode with ZnO nanoparticles?
03 August 2024 4,624 3 View
I conducted an adsorption experiment of arsenic on soil in the presence of different doses of silicon as competing ions to see the effect of silicon on arsenic adsorption and desorption. I took 5...
03 August 2024 6,500 3 View
How to calculate the molar proportions of the oxides from the XRF analyses?
02 August 2024 2,565 2 View
I fabricated Ti3C2Tx using concentrated HF 40%, I plot an XRD as attached image below.. please let to know if I obtained it or not.
02 August 2024 6,789 4 View
What information we can get from PXRD analysis other than from SCXRD analysis of a crystal ?
30 July 2024 6,261 4 View
Dear all, I have noticed, as the ZnO content increases, the Raman intensity at 100cm-1 also increases. However, there is a peak nearby at 130 cm-1, which I could not find in any paper related to...
28 July 2024 5,410 1 View
I will be doing an XRD on a sample which is powdered in natured and is a hydrogenated compound. I would like to know how we can understand the individual components and components by using the...
28 July 2024 4,548 2 View