please explain in a concise and brief.
I have to design an solar farm
14 January 2024 7,846 6 View
thanks
02 January 2024 2,583 1 View
please answer if any agricultural expert knows ??
26 November 2023 4,058 2 View
g(r) tells the probability of finding a particle at distance r where there is a particle at the origin. Now, for an experimental system let's say I know the the g(r) curves. Can I calculate the...
19 May 2023 2,529 1 View
My question is whether Silvaco or Synopsys TCAD can capture the non-quasi static effect of MOSFET while performing small signal AC analysis at high frequency, or does it just simulates the...
23 November 2022 5,180 0 View
I would like to see the recombination time of the excited electrons from CBM to the hole in VBM. I also like to see the time-dependent population changes of the electrons/holes in CBM/VBM.
14 September 2022 5,497 0 View
I want to read the Nodal temperature values from the .odb file of an analysis and import it as a predefined field for my mass diffusion simulation. How can I do that?
02 December 2021 2,969 2 View
I am confused because some papers have written that rhizobium inoculum can increase yield and nodulation of rajma and some says that due to unavailability of cross inoculation group, rajma can't...
18 May 2021 4,040 7 View
How to set up the boundary condition for the following problem in Abaqus (Image is attached). The feedstock will corotate with the hollow rotating tool and one pusher will push the feedstock...
18 April 2021 7,920 2 View
I want to simulate the process as attached in the video. In reality the feedstock will have both downfeed and rotation, whereas in the video the substrate is having the rotaion and feedstock is...
28 March 2021 2,179 1 View
I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...
10 August 2024 3,629 1 View
How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...
10 August 2024 942 3 View
How do interactions between the biosphere, the carbon cycle, and the water cycle impact global warming and interaction between the atmosphere and the hydrosphere?
09 August 2024 3,291 2 View
How to use and this is economical?
06 August 2024 3,160 2 View
Global ‘Weather’ has stopped, as ‘aqua thermionic instituted by the ‘Global thermo atmospherics has instituted global thermodynamics of 120º C + and thus all waters are, or have boiled into a...
06 August 2024 8,716 0 View
Hello. I am working on ROS production of two systems: system A is cerium oxide and hydrogen peroxide, system B is cerium oxide nanoparticle, hydrogen peroxide and potassium bromide. I did some...
04 August 2024 5,974 3 View
The starting material is a finely ground powder. Some particles contain more graphene than others.
30 July 2024 3,978 2 View
I am currently working on modeling FCC catalyst regeneration and have come across a point of uncertainty that I hope you can assist me with. In my previous models, I have utilized lumped kinetics...
30 July 2024 6,137 0 View
A computational study of heat flux on cylindrical surfaces using CNT hybrid nanofluids
28 July 2024 4,985 1 View
While I am doing HER, I noticed that nyquist plots of Electrochemical Impedance Spectroscopy (EIS) is not complete. Will it affect for the Linear Sweep Voltametry (LSV) data? However, I can found...
26 July 2024 7,542 4 View