01 January 2019 3 8K Report

hi What is the pressure of plasma for the Titanium Dioxide layer under RF Sputtering?

More Mohsen Vaezzadeh Asadi's questions See All
Is there a mathematical relation between defect density and temperature?

Is there a mathematical relation between defect density and temperature? thanks

03 April 2019 2,552 3 View

Have thermal velocities electron and hole in semiconductors constant?

hi have thermal velocities electron and hole in semiconductors constant? What are they calculated? thanks

01 February 2019 3,177 3 View

Do the following things change and how much?

hi, pleased guide me if i change thickness of different layer perovskite solar cells , or Physical conditions of making layers such as Change in pressure,Change in temperature sunstrate,...

10 November 2018 574 4 View

I made a thin layer of titanium dioxide in the lab. What methods can now be used?

Hi, I made a thin layer Tio2 in the lab. what methods can now be used to to determine lifetime of the carriers ( e and h ) , their mobility , and the concentration of the carriers ( NA , ND)? thanks

10 November 2018 1,223 4 View

What is stack of HAADF STEM cross section image?

what is stack of HAADF STEM cross section image?

10 November 2018 732 0 View

How should be simulated layers with comsol software?

Hi, I want to use comsol software to simulate provskite solar cells, I dont know what kind of information is needed to simulate different layers and finally extract the best power converting...

10 November 2018 3,587 1 View

Can anyone tell me how to clean ITO coated glass for sputtring magnetron deposition?

Dear colleague Can anyone tell me how to clean ITO coated glass for sputtring magnetron deposition?

09 October 2018 1,765 0 View

Does anyone have this book?

Dear partners Does anyone have this book? quantum theory of the optical and electronic properties of semiconductors 5th edition , hartmut huang and stephan w koch thanks

08 September 2018 9,546 0 View

What is the best conditions for the titanium dioxide present at the temperatures of the RF sputtering?

hi, Please advise. What is the best conditions for the titanium dioxide coating at what temperatures and under what physical conditions (pressure, ...) is the RF sputtering method? sincerely yours

07 August 2018 5,118 1 View

What is the use of Comsol software in Provskite Solar Cells?

Advise you. Has anyone simulated Provskite solar cell with Comsol software? What basic information is better to enter in this software? The thickness of the layer?, the temperature substrate?,...

06 July 2018 9,843 3 View

Similar questions and discussions
Does the pressure(-600 mmHg) affects pH?

When I conducted the degassing experiment using decompression under anaerobic condition(and I used ferrous based chelating agent), the oxidized ferric were observerd. So, could you tell me the...

03 March 2021 4,892 5 View

Why can't make aluminum nitride film successfully by use sputter?

We use reactive sputtering process to make aluminum nitride film, and want to make c-axis aluminum nitride film on a silicon substrate, but the crystal orientation cannot be seen with...

03 March 2021 7,975 3 View

Is there any test to determine the cardiovascular risk of patients with obesity? from the perspective of obesity?

We found tests to determine cardiovascular risk taking into account lipid profile, blood pressure, age, history of diabetes, other laboratories. But when weight is involved, there is a paradox. I...

02 March 2021 6,036 1 View

Why are the velocities so high in my Boussinesq approximation Fluent simulation?

Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...

02 March 2021 4,910 3 View

Sample dilution for quantitative analysis using ELISA?

If the detection range is in ng/ml but the reference range is in ug/ml for a molecule or protein in serum or plasma .how to dilute and what is the initial volume to be taken for quantitative analysis

02 March 2021 7,670 3 View

Why almost every element would be metallized in sufficiently high pressure and low temperature?

(This statement is from wikipedia, BTW). What is so special about metallic bond that is limiting high-P low-T state of a matter (as long as individual atoms exist, not white dwarf of neutron star...

02 March 2021 3,309 2 View

Sutter electrode holder leaking after applying positive pressure. How to fix?

I am using a Sutter electrode holder for my patch clamp experiments, but I'm having trouble keeping positive pressure inside my electrode due to a leak out of the back of the holder. I have added...

02 March 2021 5,829 1 View

What thickness need for ITO to use as conductive layer?

I want to do RF sputtering of ITO on glass substrate using magnetron sputtering. what thickness do i need to make it good conductive layer to use it for PSC. Moreover, whats about thickness of...

01 March 2021 395 3 View

What SPSS analysis should I run with one IV (with two levels) and two DVs?

Hi, I am trying to figure out which test would be most appropriate to run for the following question: Is there a difference in task blood pressure between smokers and non-smokers? There are two...

01 March 2021 8,235 2 View

How much pressure we can reduce at the outlet to avoid Reverse Flow?

I am simulating Heat Exchanger. I have tried and tested all the methods to resolve this issue from the internet like refining mesh, improving skewness and orthogonal quality ,extending outlet to...

01 March 2021 6,985 3 View

Our partners will collect data and use cookies for ad personalization and measurement. Learn how we and our ad partner Google, collect and use data. Agree & close