What is the best technique for quantitative approach of light induced defects in chalcogenide glasses?

More Dr. Anjani Kumar's questions See All

What is the best metod for preparation of thin films of chalcogenide glasses?

Give suitable answer for the same.

01 February 2018 1,032 3 View

Which selenium based alloy is more appropiate for optical devices application point of view?

Is this is Se-Cu or Se-Pb or Se-In or Se-Ag or Se-Al or any other chalcogenide glassy system, Kindly specify and give suitable explanation for the same.

07 August 2017 9,332 3 View

Is chalcogenide materials suitable for proto type three dimensional printing?

give suitable answer.

31 December 2016 6,826 0 View

What is the difference between four probe and two probe measurement method?

Well known answer is that, two probe method is appropiate only for highly resistive material and four probe measurement method is only for low resistive material, but for determination of band gap...

08 September 2016 8,788 9 View

Is it possible to draw a B-H curve for chalcogenide glasses?

Explain and give suitable references.

08 September 2016 4,191 2 View

What are important factors, those can be evaluated by dielectrical measurements?

Explain and give suitable explanation.

07 August 2016 1,412 3 View

It have been observed that density of defects states of thin films of chalcogenide glasses are more than bulk samples, why?

Explain with suitable references.

07 August 2016 6,860 2 View

What may be the grain size of nanocrystalline materials?

Explain and give correct explanation.

03 April 2016 6,791 4 View

What are the important factors that can be evaluated by dielectric measurements of nanocrystalline materials?

Explain and give the suitable formulae.

02 March 2016 8,864 4 View

How can we connect the study of light induced defects in chalcogenide glasses for solar cell applications?

Explain and give suitable explanation.

02 March 2016 4,600 4 View

Controlling for pupil light reflex when analyzing pupil size time course?

I used eye tracking to examine how participants from two different populations (A and B) react to an image. Participants in population A exhibit larger pupil sizes over time, but they also have...

10 August 2024 3,229 0 View

Z-average size from Dynamic Light scattering can it be lower than the original probe size?

Hi everyone, Recently I have been conducting Dynamic Light scattering experiments in a micellar solution at 5 and gel at 37 degrees of Celsius with latex particles of diameter 190-500 nm. While...

01 August 2024 1,168 4 View

While doing Chronoamperometry, when the light is turned off, why the current is not decreasing sharply?

Here, I have used Ag/AgCl as reference electrode and 0.5M KOH.

29 July 2024 4,538 3 View

Can i apply a public questionnaire but analyse it with a different data analysis method?

First, thanks for taking the time to read my puzzle 🥹! I am currently working on the methodology part of my dissertation, and I have chosen a questionnaire as the instrument for my quantitative...

27 July 2024 3,457 3 View

How to merge two or more linkage maps?

I have three linkage maps that needs to be integrated to create a consensus map for QTL mapping.

25 July 2024 6,505 2 View

Aqua regia not heating up?

I used Aqua regia to clean Au nanoparticles in the used glassware. But for some reasons, it is not heating up upon mixing. The color did change from no color to light orange. The Au NPs on the...

25 July 2024 4,390 0 View

I found the zeta potential of exosomes in DLS and it was -8mv. So is it correct or not ?

What should be the zeta potential of bovine milk exosomes

25 July 2024 7,376 5 View

Comparing Liposome Size: DLS Measurement vs. SEM Observation with Air Drying ?

I have an issue with SEM imaging of liposomes. When measured by DLS, they appear to be around 120 nm, but when using SEM with simple air drying, they appear much larger, around one micrometer.

25 July 2024 3,395 3 View

Can anyone kindly suggest research topics in the area of thermodynamics, heat transfer, fluid mechanics or renewable energy?

I am an undergraduate mechanical engineering student seeking suggestions on topics related to either thermodynamics, fluid mechanics, heat transfer or renewable energy for my final year project....

24 July 2024 4,058 5 View

What effects of Autonomous Language Learning can be shown regarding linguistic competence and communicative skills?

Autonomous Language Learning can be implemented from primary to tertiary education. Practioners and students report on its effectiveness, however, there appears to be little quantitative or...

20 July 2024 2,592 2 View

Shikha Shukla

Dear Anjani ƏESR and ac conductivity measurements can be take as quantitative estimation of light induced defects in chalcogenide glasses.

Dr. Anjani Kumar

Thanks Dr Shikha for your nice discussion about quantitative estimation of light induced defects in chalcogenide glasses.

SCLC and TSC techniques can also be used for quantitative approach of light induced defects in chalcogenide materials.