What could be a possible reason for an incomplete discharge of a capacitor?

Chandrakant Kumar Nirala @Chandrakant-Nirala

29 November 2018 1 7K Report

Hello All! What could be a possible reason for an incomplete discharge of a capacitor, if it is connected with a continuous DC source? The load connected with the discharging circuit can be considered as the tool and the work-piece of Micro-EDM. I will appreciate the answers supported with some documents.

Thanks

Shubham ..

Voltage will never drop down to 0.

Badges
Science topic

More Chandrakant Kumar Nirala's questions See All

How to measure FWHM from XRD analysis?

From XRD analysis how to measure Full Width Half Maxima (FWHM)?

15 September 2019 4,589 5 View

How to explore crystal structure of unknown material from XRD pattern, not listed in any of database like COD, ICDD, JCPDS, etc.?

Recently, We have synthesized a material having structure A2BO4, the XRD pattern of synthesized powder doesn't match with any reported XRD pattern or theorectical databases.

16 April 2018 2,791 3 View

In absence of balancing grooves, will the valve make a grunt noise?

We are facing the problem of grunt noises in our steering systems. Please advise whether we should increase the number of balancing grooves on the spool.

01 November 2015 6,516 2 View

What are the sources of intrusion data for wireless sensor networks?

Intrusion data for infrastructure networks are available. Can any body help in finding the datasets for intrusion detection in wireless sensor networks?

09 October 2014 6,713 5 View

What software is available for the analysis of qualitative data in social science research?

It becomes very difficult to analyse qualitative data. Quantitative data takes a lot less time to get results.

16 December 2012 2,597 37 View

How to get onecolumn document from standard IEEE ACCESS LateX template?

I have prepared a manuscript in IEEE Latex template, but for some purpose, I need to prepare a word file as well (detailed format is not required). Compared to two column .tex file, one column...

02 March 2021 1,830 3 View

Sutter electrode holder leaking after applying positive pressure. How to fix?

I am using a Sutter electrode holder for my patch clamp experiments, but I'm having trouble keeping positive pressure inside my electrode due to a leak out of the back of the holder. I have added...

02 March 2021 5,829 1 View

What element is driving the different slop in the low frequency tail?

My study consists simple corrosion inhibitors in salty brine. Right now I just fit my circuit with randles with CPE. Just wondering how the slop can given more info of the experiment. Or any...

01 March 2021 6,474 3 View

How to model the battery pack in PSIM or PSCAD?

Hello, I have simulated a single battery cell using Thevenin equivalent circuit. For a battery pack, I have a large number of cells connected in series and parallel connections. Is there any way...

28 February 2021 2,116 1 View

Does the circuit modeling for planar monopole antennas using Foster canonical forms give good approximation?

Hi researchers, I am searching for some accurate way to do the circuit modeling of planar CPW-fed monopole antennas. I have gone through the literature where mostly circuit modeling is done using...

28 February 2021 7,016 1 View

How to design a boost converter for a mppt controller?

I have a doubt on how to select the inductor and capacitor value when I want to implement MPPT controller. This is because we always take a maximum output voltage and current but in this case, we...

28 February 2021 3,637 2 View

How to find the right number of integration points in second order 3d finite elements?

I am familiar with finite element simulations and numerical schemes like the Gauss Legendre quadrature. I also know that the Gauss integration yields exact values for polynomials up to degree 2n-1...

27 February 2021 6,818 3 View

High aspect ratio hexahedral mesh optimization solver?

I am interested in evaluating mesh optimization solvers that converge to high aspect ratio unstructured hexahedral grids. In other words, I am interested in a solver that optimizes warpage,...

26 February 2021 7,279 2 View

Anyone with some Transgenomic Wavemaker software? Seeking help from the chromatography community?

I am trying to seek out some Transgenomic Wavemaker software (happy to purchase a computer too) to operate a fraction collector. The only way to connect to the fraction collector so far is to...

23 February 2021 9,181 1 View

How to find out the problem of VMD software when i run it?

Hello I try to install and run the VMD software on windows 10 (64-bit).It doesn`t work and it is closed when I run it. I checked all of tutorials, videos and documents. But they did not work...

22 February 2021 8,211 3 View