What are the transesterification ranges to conduct ultrasonic assisted for high FFA oil ?

11 November 2018 0 5K Report

Dear RG,

What are the transesterification ranges to conduct esterification of high FFA oil in an ultrasonic reactor?

Badges
Science topic

More Olusegun D. Samuel's questions See All

Can inferior properties of crude biomass pyrolytic oil be attributed to the presence of polar compound?

Can basic inferior fuel related properties of crude biomass pyrolysis oil (BPO) be attributed to the presence of polar compound such as various oxygenates, nitrogen heterocycles and...

08 September 2019 4,766 4 View

What is the significance of additive in Oil Sands Recovery Processes?

What is the significance of additive in Oil Sands Recovery Processes? What is the role of Mechanical Engineer with the adoption of additive for recovery?

07 August 2019 6,559 3 View

How feasible is it to demonstrate solid fuel conversion and biodiesel modelling in program environments such as matlab, python and fortran?

How feasible is it to demonstrate solid fuel conversion and biodiesel production modelling in program environments such as matlab, python and fortran?

05 June 2019 4,547 4 View

What are the latest innovations in biodiesel production, hydrogen and fuel cells?

03 April 2019 4,905 3 View

What are the useful material and book for modeling biomass conversion processes using relevant tools (e.g., Aspen Plus)?

02 March 2019 7,865 3 View

As a Ph.D supervisor, how will guide your project students to investigate techo-economic study of CO2 capture in manufacturing industry?

As a Ph.D Supervisor, how will guide your project students to investigate CO2 capture and utilization in manufacturing industry via techno-economic tool?

01 February 2019 8,179 1 View

How can I adopt CFD, C++ and finite element to improve and model Li batery management for effective utilization?

How can I adopt CFD, C+ + and finite element to improve and model Li battery management for effective utilization? I would appreciate discussions on the technique of model tools, experimental...

01 February 2019 5,816 2 View

How will I develop and validate gas turbine combustors with Computational Fluid Dynamics (CFD) models?

Dear RG, How will I develop and validate gas turbine combustors with Computational Fluid Dynamics (CFD) models? Best Regards, Dr. O.D. SAMUEL

11 December 2018 1,853 4 View

Can cetane number of ethylic biodiesel production from oil (e.g coconut ethyl ester) be calculated from individual ethyl estters from a literature?

Dear RG, Literature has showed that cetane number (CN) of biodiesel e.g jatroha oil methyl can be calculated by CN =Xme (wt.%)XCNme; where CN is the cetane number of the biodiesel; Xme is the...

11 December 2018 8,575 5 View

What is the best way to teach CFD to undergraduate students in Department of Mechanical Engineering?

What is the best way to teach CFD/suitable lecture material to undergraduate students in Department of Mechanical Engineering?

11 December 2018 3,028 14 View

How to heat polymer for about 130° without oil bath ?

is there any other way to heat a polymer evenly other than oil bath if so what are those and how to use it

06 August 2024 947 1 View

Do you think can be any gas and oil bearing rocks in Eastern part of Iran?

I want to know more about petroleum deposits in Iran.

02 August 2024 8,725 3 View

Is it possible to improve the reforming section of the Haber-Bosch process without using air separation units?

A typical reforming section in a large-scale Haber-Bosch process (Figure 1) comprises two reactors. A mixture of methane (CH4) and steam (H2O) is fed into a primary reformer to produce syngas via...

01 August 2024 7,051 5 View

Heavy Crude oil PVT Data?

Hello i need heavy oil PVT data having viscoisty of 2000-3000 cP. If someone have it or research papers about it, kindly share it with me Thanks

25 July 2024 6,940 1 View

What are the most PROBLEMS of HYBRID nanofluid in oil industry ?

explain your idea

23 July 2024 1,197 0 View

How to remove soap formation during transesterification?

Dear all, We've been doing transesterification with our raw materials - a mixture of pairing oil (which is said to came from the skin part of a coconut) and crude coconut oil. During the addition...

14 July 2024 2,200 0 View

Do you think can be any gas and oil reservoirs in central of Iran?

I want to know more about gas and oil reservoirs in Iran.

14 July 2024 3,350 2 View

How am I supposed to find justifications for the unusual fatty acid profile in broiler diet?

I've obtained a fatty acid profile of broiler diet comprised of SFA 48 to 93%, MUFA (22 to 40%), PUFA (non determined to 10.4%. The PUFA composition is mainly n-6 and almost no value for n-3. The...

08 July 2024 9,165 4 View

Determination of fatty acids in fish?

I measured the fatty acids in the fish, using the internal standard method in the national standard method, I first extracted the fish oil with cable extraction, please ask me how many grams of...

02 July 2024 900 1 View

Is there a vegetation zone dividing location based on climate or geographic parameters available by province level?

I am researching the traceability of palm oil and need a parameter that can differentiate between provinces around the world. I want to group the provinces by their vegetation zone and see if it's...

01 July 2024 888 2 View